--- /dev/null
+From a4ea446a07d7ba010c3c32286a22dc89cffa1e54 Mon Sep 17 00:00:00 2001
+From: Martin Sperl <kernel@martin.sperl.org>
+Date: Sun, 12 May 2019 16:17:08 +0000
+Subject: [PATCH] spi: devicetree: add overlays for spi 3 to 6
+
+Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
+---
+ arch/arm/boot/dts/overlays/Makefile | 8 ++
+ arch/arm/boot/dts/overlays/README | 104 ++++++++++++++++++
+ .../boot/dts/overlays/spi3-1cs-overlay.dts | 44 ++++++++
+ .../boot/dts/overlays/spi3-2cs-overlay.dts | 56 ++++++++++
+ .../boot/dts/overlays/spi4-1cs-overlay.dts | 44 ++++++++
+ .../boot/dts/overlays/spi4-2cs-overlay.dts | 56 ++++++++++
+ .../boot/dts/overlays/spi5-1cs-overlay.dts | 44 ++++++++
+ .../boot/dts/overlays/spi5-2cs-overlay.dts | 56 ++++++++++
+ .../boot/dts/overlays/spi6-1cs-overlay.dts | 44 ++++++++
+ .../boot/dts/overlays/spi6-2cs-overlay.dts | 56 ++++++++++
+ 10 files changed, 512 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -144,6 +144,14 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ spi2-1cs.dtbo \
+ spi2-2cs.dtbo \
+ spi2-3cs.dtbo \
++ spi3-1cs.dtbo \
++ spi3-2cs.dtbo \
++ spi4-1cs.dtbo \
++ spi4-2cs.dtbo \
++ spi5-1cs.dtbo \
++ spi5-2cs.dtbo \
++ spi6-1cs.dtbo \
++ spi6-2cs.dtbo \
+ ssd1306.dtbo \
+ superaudioboard.dtbo \
+ sx150x.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -2085,6 +2085,110 @@ Params: cs0_pin GPIO pin
+ is 'okay' or enabled).
+
+
++Name: spi3-1cs
++Info: Enables spi3 with a single chip select (CS) line and associated spidev
++ dev node. The gpio pin number for the CS line and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi3-1cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev3.0 (default
++ is 'on' or enabled).
++
++
++Name: spi3-2cs
++Info: Enables spi3 with two chip select (CS) lines and associated spidev
++ dev nodes. The gpio pin numbers for the CS lines and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi3-2cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
++ cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev3.0 (default
++ is 'on' or enabled).
++ cs1_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev3.1 (default
++ is 'on' or enabled).
++
++
++Name: spi4-1cs
++Info: Enables spi4 with a single chip select (CS) line and associated spidev
++ dev node. The gpio pin number for the CS line and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi4-1cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev4.0 (default
++ is 'on' or enabled).
++
++
++Name: spi4-2cs
++Info: Enables spi4 with two chip select (CS) lines and associated spidev
++ dev nodes. The gpio pin numbers for the CS lines and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi4-2cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
++ cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev4.0 (default
++ is 'on' or enabled).
++ cs1_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev4.1 (default
++ is 'on' or enabled).
++
++
++Name: spi5-1cs
++Info: Enables spi5 with a single chip select (CS) line and associated spidev
++ dev node. The gpio pin numbers for the CS lines and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi5-1cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev5.0 (default
++ is 'on' or enabled).
++
++
++Name: spi5-2cs
++Info: Enables spi5 with two chip select (CS) lines and associated spidev
++ dev nodes. The gpio pin numbers for the CS lines and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi5-2cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
++ cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev5.0 (default
++ is 'on' or enabled).
++ cs1_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev5.1 (default
++ is 'on' or enabled).
++
++
++Name: spi6-1cs
++Info: Enables spi6 with a single chip select (CS) line and associated spidev
++ dev node. The gpio pin number for the CS line and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi6-1cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev6.0 (default
++ is 'on' or enabled).
++
++
++Name: spi6-2cs
++Info: Enables spi6 with two chip select (CS) lines and associated spidev
++ dev nodes. The gpio pin numbers for the CS lines and spidev device node
++ creation are configurable.
++Load: dtoverlay=spi6-2cs,<param>=<val>
++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0).
++ cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1).
++ cs0_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev6.0 (default
++ is 'on' or enabled).
++ cs1_spidev Set to 'off' to prevent the creation of a
++ userspace device node /dev/spidev6.1 (default
++ is 'on' or enabled).
++
++
+ Name: ssd1306
+ Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer.
+ Load: dtoverlay=ssd1306,<param>=<val>
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts
+@@ -0,0 +1,44 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi3_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <0>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi3>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi3_pins &spi3_cs_pins>;
++ cs-gpios = <&gpio 0 1>;
++ status = "okay";
++
++ spidev3_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs0_spidev = <&spidev3_0>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts
+@@ -0,0 +1,56 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi3_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <0 24>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi3>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi3_pins &spi3_cs_pins>;
++ cs-gpios = <&gpio 0 1>, <&gpio 24 1>;
++ status = "okay";
++
++ spidev3_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++
++ spidev3_1: spidev@1 {
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs1_pin = <&frag0>,"brcm,pins:4",
++ <&frag1>,"cs-gpios:16";
++ cs0_spidev = <&spidev3_0>,"status";
++ cs1_spidev = <&spidev3_1>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts
+@@ -0,0 +1,44 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi4_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <4>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi4>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi4_pins &spi4_cs_pins>;
++ cs-gpios = <&gpio 4 1>;
++ status = "okay";
++
++ spidev4_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs0_spidev = <&spidev4_0>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts
+@@ -0,0 +1,56 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi4_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <4 25>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi4>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi4_pins &spi4_cs_pins>;
++ cs-gpios = <&gpio 4 1>, <&gpio 25 1>;
++ status = "okay";
++
++ spidev4_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++
++ spidev4_1: spidev@1 {
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs1_pin = <&frag0>,"brcm,pins:4",
++ <&frag1>,"cs-gpios:16";
++ cs0_spidev = <&spidev4_0>,"status";
++ cs1_spidev = <&spidev4_1>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts
+@@ -0,0 +1,44 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi5_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <12>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi5>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi5_pins &spi5_cs_pins>;
++ cs-gpios = <&gpio 12 1>;
++ status = "okay";
++
++ spidev5_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs0_spidev = <&spidev5_0>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts
+@@ -0,0 +1,56 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi5_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <12 26>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi5>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi5_pins &spi5_cs_pins>;
++ cs-gpios = <&gpio 12 1>, <&gpio 26 1>;
++ status = "okay";
++
++ spidev5_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++
++ spidev5_1: spidev@1 {
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs1_pin = <&frag0>,"brcm,pins:4",
++ <&frag1>,"cs-gpios:16";
++ cs0_spidev = <&spidev5_0>,"status";
++ cs1_spidev = <&spidev5_1>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts
+@@ -0,0 +1,44 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi6_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <18>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi6>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi6_pins &spi6_cs_pins>;
++ cs-gpios = <&gpio 18 1>;
++ status = "okay";
++
++ spidev6_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs0_spidev = <&spidev6_0>,"status";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts
+@@ -0,0 +1,56 @@
++/dts-v1/;
++/plugin/;
++
++
++/ {
++ compatible = "brcm,bcm2838";
++
++ fragment@0 {
++ target = <&spi6_cs_pins>;
++ frag0: __overlay__ {
++ brcm,pins = <18 27>;
++ brcm,function = <1>; /* output */
++ };
++ };
++
++ fragment@1 {
++ target = <&spi6>;
++ frag1: __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi6_pins &spi6_cs_pins>;
++ cs-gpios = <&gpio 18 1>, <&gpio 27 1>;
++ status = "okay";
++
++ spidev6_0: spidev@0 {
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++
++ spidev6_1: spidev@1 {
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ status = "okay";
++ };
++ };
++ };
++
++ __overrides__ {
++ cs0_pin = <&frag0>,"brcm,pins:0",
++ <&frag1>,"cs-gpios:4";
++ cs1_pin = <&frag0>,"brcm,pins:4",
++ <&frag1>,"cs-gpios:16";
++ cs0_spidev = <&spidev6_0>,"status";
++ cs1_spidev = <&spidev6_1>,"status";
++ };
++};
projects / openwrt / staging / dedeckeh.git / blobdiff