+++ /dev/null
-From 13be2bbd1a22f1b4d9fd260d80b561698f623ac1 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 30 May 2019 16:44:24 +0100
-Subject: [PATCH] overlays: Add i2c3-6 and uart2-5 overlays
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile | 8 +++
- arch/arm/boot/dts/overlays/README | 52 ++++++++++++++++++++
- arch/arm/boot/dts/overlays/i2c3-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/i2c4-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/i2c5-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/i2c6-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/uart2-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/uart3-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/uart4-overlay.dts | 27 ++++++++++
- arch/arm/boot/dts/overlays/uart5-overlay.dts | 27 ++++++++++
- 10 files changed, 276 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -65,6 +65,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- i2c-sensor.dtbo \
- i2c0-bcm2708.dtbo \
- i2c1-bcm2708.dtbo \
-+ i2c3.dtbo \
-+ i2c4.dtbo \
-+ i2c5.dtbo \
-+ i2c6.dtbo \
- i2s-gpio28-31.dtbo \
- ilitek251x.dtbo \
- iqaudio-codec.dtbo \
-@@ -149,6 +153,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- tpm-slb9670.dtbo \
- uart0.dtbo \
- uart1.dtbo \
-+ uart2.dtbo \
-+ uart3.dtbo \
-+ uart4.dtbo \
-+ uart5.dtbo \
- udrc.dtbo \
- upstream.dtbo \
- vc4-fkms-v3d.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1137,6 +1137,34 @@ Params: sda1_pin GPIO pin
- "yes")
-
-
-+Name: i2c3
-+Info: Enable the i2c3 bus
-+Load: dtoverlay=i2c3,<param>
-+Params: pins_2_3 Use GPIOs 2 and 3
-+ pins_4_5 Use GPIOs 4 and 5 (default)
-+
-+
-+Name: i2c4
-+Info: Enable the i2c4 bus
-+Load: dtoverlay=i2c4,<param>
-+Params: pins_6_7 Use GPIOs 6 and 7
-+ pins_8_9 Use GPIOs 8 and 9 (default)
-+
-+
-+Name: i2c5
-+Info: Enable the i2c5 bus
-+Load: dtoverlay=i2c5,<param>
-+Params: pins_10_11 Use GPIOs 10 and 11
-+ pins_12_13 Use GPIOs 12 and 13 (default)
-+
-+
-+Name: i2c6
-+Info: Enable the i2c6 bus
-+Load: dtoverlay=i2c6,<param>
-+Params: pins_0_1 Use GPIOs 0 and 1
-+ pins_22_23 Use GPIOs 22 and 23 (default)
-+
-+
- Name: i2s-gpio28-31
- Info: move I2S function block to GPIO 28 to 31
- Load: dtoverlay=i2s-gpio28-31
-@@ -2199,6 +2227,30 @@ Params: txd1_pin GPIO pin
- rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
-
-
-+Name: uart2
-+Info: Enable uart 2 on GPIOs 0-3
-+Load: dtoverlay=uart2,<param>
-+Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off)
-+
-+
-+Name: uart3
-+Info: Enable uart 3 on GPIOs 4-7
-+Load: dtoverlay=uart3,<param>
-+Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off)
-+
-+
-+Name: uart4
-+Info: Enable uart 4 on GPIOs 8-11
-+Load: dtoverlay=uart4,<param>
-+Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off)
-+
-+
-+Name: uart5
-+Info: Enable uart 5 on GPIOs 12-15
-+Load: dtoverlay=uart5,<param>
-+Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off)
-+
-+
- Name: udrc
- Info: Configures the NW Digital Radio UDRC Hat
- Load: dtoverlay=udrc,<param>=<val>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&i2c3>;
-+ __overlay__ {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c3_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2c3_pins>;
-+ __dormant__ {
-+ brcm,pins = <2 3>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ pins_2_3 = <0>,"=1";
-+ pins_4_5 = <0>,"!1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&i2c4>;
-+ __overlay__ {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c4_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2c4_pins>;
-+ __dormant__ {
-+ brcm,pins = <6 7>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ pins_6_7 = <0>,"=1";
-+ pins_8_9 = <0>,"!1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&i2c5>;
-+ __overlay__ {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c5_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2c5_pins>;
-+ __dormant__ {
-+ brcm,pins = <10 11>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ pins_10_11 = <0>,"=1";
-+ pins_12_13 = <0>,"!1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&i2c6>;
-+ __overlay__ {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c6_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2c6_pins>;
-+ __dormant__ {
-+ brcm,pins = <0 1>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ pins_0_1 = <0>,"=1";
-+ pins_22_23 = <0>,"!1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/uart2-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&uart2>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart2_pins>;
-+ __dormant__ {
-+ brcm,pins = <0 1 2 3>;
-+ brcm,pull = <0 2 2 0>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ ctsrts = <0>,"=1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/uart3-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&uart3>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart3_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart3_pins>;
-+ __dormant__ {
-+ brcm,pins = <4 5 6 7>;
-+ brcm,pull = <0 2 2 0>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ ctsrts = <0>,"=1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/uart4-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&uart4>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart4_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart4_pins>;
-+ __dormant__ {
-+ brcm,pins = <8 9 10 11>;
-+ brcm,pull = <0 2 2 0>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ ctsrts = <0>,"=1";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/uart5-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2838";
-+
-+ fragment@0 {
-+ target = <&uart5>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart5_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart5_pins>;
-+ __dormant__ {
-+ brcm,pins = <12 13 14 15>;
-+ brcm,pull = <0 2 2 0>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ ctsrts = <0>,"=1";
-+ };
-+};
projects / openwrt / staging / dedeckeh.git / blobdiff