brcm2708: rename target to bcm27xx

[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.19 / 950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch b/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
deleted file mode 100644 (file)
index 1202d10..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 89af5d7df7f548744bd675d96295c0f45e24b31f Mon Sep 17 00:00:00 2001
-From: Markus Proeller <markus.proeller@pieye.org>
-Date: Thu, 10 Oct 2019 19:13:02 +0200
-Subject: [PATCH] dtoverlays: Add an overlay for the Infineon IRS1125
-
-The Infineon IRS1125 is a CSI2 time of flight depth sensor
-which has a suitable V4L2 subdevice driver.
-
-Add an overlay for configuring it.
-
-Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             | 12 +++
- .../arm/boot/dts/overlays/irs1125-overlay.dts | 97 +++++++++++++++++++
- 3 files changed, 110 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       iqaudio-dac.dtbo \
-       iqaudio-dacplus.dtbo \
-       iqaudio-digi-wm8804-audio.dtbo \
-+      irs1125.dtbo \
-       jedec-spi-nor.dtbo \
-       justboom-dac.dtbo \
-       justboom-digi.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1347,6 +1347,18 @@ Params: card_name               Override
-                                 dai stream name.
- 
- 
-+Name:   irs1125
-+Info:   Infineon irs1125 TOF camera module.
-+        Uses Unicam 1, which is the standard camera connector on most Pi
-+        variants.
-+Load:   dtoverlay=irs1125,<param>=<val>
-+Params: i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
-+                                Useful on Compute Modules.
-+
-+        i2c_pins_28_29          Use pins 28&29 for the I2C instead of 44&45.
-+                                This is required for Pi B+, 2, 0, and 0W.
-+
-+
- Name:   jedec-spi-nor
- Info:   Adds support for JEDEC-compliant SPI NOR flash devices.  (Note: The
-         "jedec,spi-nor" kernel driver was formerly known as "m25p80".)
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts
-@@ -0,0 +1,97 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for IRS1125 camera module on VC I2C bus
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+      compatible = "brcm,bcm2835";
-+
-+      fragment@0 {
-+              target = <&i2c_vc>;
-+              __overlay__ {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      status = "okay";
-+
-+                      irs1125: irs1125@3D {
-+                              compatible = "infineon,irs1125";
-+                              reg = <0x3D>;
-+                              status = "okay";
-+
-+                              pwdn-gpios = <&gpio 5 0>;
-+                              clocks = <&irs1125_clk>;
-+
-+                              irs1125_clk: camera-clk {
-+                                      compatible = "fixed-clock";
-+                                      #clock-cells = <0>;
-+                                      clock-frequency = <26000000>;
-+                              };
-+
-+                              port {
-+                                      irs1125_0: endpoint {
-+                                              remote-endpoint = <&csi1_ep>;
-+                                              clock-lanes = <0>;
-+                                              data-lanes = <1 2>;
-+                                              clock-noncontinuous;
-+                                              link-frequencies =
-+                                                      /bits/ 64 <297000000>;
-+                                      };
-+                              };
-+                      };
-+              };
-+      };
-+
-+      fragment@1 {
-+              target = <&csi1>;
-+              __overlay__ {
-+                      status = "okay";
-+
-+                      port {
-+                              csi1_ep: endpoint {
-+                                      remote-endpoint = <&irs1125_0>;
-+                              };
-+                      };
-+              };
-+      };
-+
-+      fragment@2 {
-+              target = <&i2c0_pins>;
-+              __dormant__ {
-+                      brcm,pins = <28 29>;
-+                      brcm,function = <4>; /* alt0 */
-+              };
-+      };
-+      fragment@3 {
-+              target = <&i2c0_pins>;
-+              __overlay__ {
-+                      brcm,pins = <44 45>;
-+                      brcm,function = <5>; /* alt1 */
-+              };
-+      };
-+      fragment@4 {
-+              target = <&i2c0_pins>;
-+              __dormant__ {
-+                      brcm,pins = <0 1>;
-+                      brcm,function = <4>; /* alt0 */
-+              };
-+      };
-+      fragment@5 {
-+              target = <&i2c_vc>;
-+              __overlay__ {
-+                      status = "okay";
-+              };
-+      };
-+
-+      fragment@6 {
-+              target-path="/__overrides__";
-+              __overlay__ {
-+                      cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0";
-+                      cam0-pwdn      = <&irs1125>,"pwdn-gpios:4";
-+              };
-+      };
-+
-+      __overrides__ {
-+              i2c_pins_0_1 = <0>,"-2-3+4";
-+              i2c_pins_28_29 = <0>,"+2-3-4";
-+      };
-+};