+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "MobiPromo CM520-79F";
- compatible = "mobipromo,cm520-79f";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- ranges;
-
- sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "cm520-79f:blue:usb";
- gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
- };
-
- led_sys: can {
- label = "cm520-79f:blue:can";
- gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "cm520-79f:blue:wan";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "cm520-79f:blue:lan1";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "cm520-79f:blue:lan2";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "cm520-79f:blue:wlan2g";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "cm520-79f:blue:wlan5g";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- mtd-mac-address = <&art 0x1006>;
-};
-
-&gmac1 {
- mtd-mac-address = <&art 0x5006>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "MIBIB";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "BOOTCONFIG";
- reg = <0x200000 0x100000>;
- };
-
- partition@300000 {
- label = "QSEE";
- reg = <0x300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "QSEE_1";
- reg = <0x400000 0x100000>;
- read-only;
- };
-
- partition@500000 {
- label = "CDT";
- reg = <0x500000 0x80000>;
- read-only;
- };
-
- partition@580000 {
- label = "CDT_1";
- reg = <0x580000 0x80000>;
- read-only;
- };
-
- partition@600000 {
- label = "BOOTCONFIG1";
- reg = <0x600000 0x80000>;
- };
-
- partition@680000 {
- label = "APPSBLENV";
- reg = <0x680000 0x80000>;
- };
-
- partition@700000 {
- label = "APPSBL";
- reg = <0x700000 0x200000>;
- read-only;
- };
-
- partition@900000 {
- label = "APPSBL_1";
- reg = <0x900000 0x200000>;
- read-only;
- };
-
- art: partition@b00000 {
- label = "ART";
- reg = <0xb00000 0x80000>;
- read-only;
- };
-
- partition@b80000 {
- label = "ubi";
- reg = <0xb80000 0x7480000>;
- };
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
projects / openwrt / staging / dedeckeh.git / blobdiff