ramips: Add support for ZBT WE826-E

[openwrt/staging/dedeckeh.git] / target / linux / ramips / dts / ZBT-WE826-E.dts

diff --git a/target/linux/ramips/dts/ZBT-WE826-E.dts b/target/linux/ramips/dts/ZBT-WE826-E.dts
new file mode 100644 (file)
index 0000000..ce97b03
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WE826-E.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ZBT-WE826.dtsi"
+
+/ {
+       compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+       model = "ZBT-WE826-E";
+
+       /delete-node/ leds;
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: gsm {
+                       label = "zbt-we826-e:blue:gsm";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
+               signal {
+                       label = "zbt-we826-e:green:signal";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+
+               sim {
+                       label = "zbt-we826-e:red:sim";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+               };
+
+               air {
+                       label = "zbt-we826-e:red:wifi";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "i2c", "uartf", "wled";
+                       ralink,function = "gpio";
+               };
+       };
+};