X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fdedeckeh.git;a=blobdiff_plain;f=target%2Flinux%2Fgeneric%2Fpending-4.9%2F110-ehci_hcd_ignore_oc.patch;fp=target%2Flinux%2Fgeneric%2Fpending-4.9%2F110-ehci_hcd_ignore_oc.patch;h=0000000000000000000000000000000000000000;hp=644d936574e27b826938b9d2a3e1e88bc4734172;hb=57a9633a2c6c3be56c794576157f057a70ac52df;hpb=28fd4ac512ec1c08a79ac7a434b2def3cc82f1d5

diff --git a/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch
deleted file mode 100644
index 644d936574..0000000000
--- a/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Florian Fainelli <florian@openwrt.org>
-Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      |    2 +-
- drivers/usb/host/ehci-hub.c      |    4 ++--
- drivers/usb/host/ehci-platform.c |    1 +
- drivers/usb/host/ehci.h          |    1 +
- include/linux/usb/ehci_pdriver.h |    1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -638,7 +638,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->ignore_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -1008,7 +1008,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -259,6 +259,8 @@ static int ehci_platform_probe(struct pl
- 		hcd->has_tt = 1;
- 	if (pdata->reset_on_resume)
- 		priv->reset_on_resume = true;
-+	if (pdata->ignore_oc)
-+		ehci->ignore_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -230,6 +230,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
-+	unsigned		ignore_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	ignore_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);