From: Tony Butler Date: Sun, 25 Dec 2022 23:11:48 +0000 (-0800) Subject: treewide: strip useless `default n` Kconfig lines X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fdedeckeh.git;a=commitdiff_plain;h=8bc72ea7be3976711dacc09f0fdab061d6e5152a treewide: strip useless `default n` Kconfig lines Kconfig docs say: > The default value deliberately defaults to 'n' in order to avoid > bloating the build. Apply this rule everywhere, to avoid more cloning of bad examples Signed-off-by: Tony Butler --- diff --git a/config/Config-build.in b/config/Config-build.in index c2303637cb..8c81ef654c 100644 --- a/config/Config-build.in +++ b/config/Config-build.in @@ -5,7 +5,6 @@ config EXPERIMENTAL bool "Enable experimental features by default" - default n help Set this option to build with latest bleeding edge features which may or may not work as expected. @@ -42,7 +41,6 @@ menu "Global build settings" config BUILDBOT bool "Set build defaults for automatic builds (e.g. via buildbot)" - default n help This option changes several defaults to be more suitable for automatic builds. This includes the following changes: @@ -75,10 +73,8 @@ menu "Global build settings" config DISPLAY_SUPPORT bool "Show packages that require graphics support (local or remote)" - default n config BUILD_PATENTED - default n bool "Compile with support for patented functionality" help When this option is disabled, software which provides patented functionality @@ -86,7 +82,6 @@ menu "Global build settings" functionality, this optional support will get disabled for this package. config BUILD_NLS - default n bool "Compile with full language support" help When this option is enabled, packages are built with the full versions of @@ -100,7 +95,6 @@ menu "Global build settings" config CLEAN_IPKG bool prompt "Remove ipkg/opkg status data files in final images" - default n help This removes all ipkg/opkg status data files from the target directory before building the root filesystem. @@ -108,14 +102,12 @@ menu "Global build settings" config IPK_FILES_CHECKSUMS bool prompt "Record files checksums in package metadata" - default n help This makes file checksums part of package metadata. It increases size but provides you with pkg_check command to check for flash corruptions. config INCLUDE_CONFIG bool "Include build configuration in firmware" if DEVEL - default n help If enabled, buildinfo files will be stored in /etc/build.* of firmware. @@ -149,7 +141,6 @@ menu "Global build settings" config DEBUG bool prompt "Compile packages with debugging info" - default n help Adds -g3 to the CFLAGS. diff --git a/config/Config-devel.in b/config/Config-devel.in index e16e6ecaab..cbac91c09d 100644 --- a/config/Config-devel.in +++ b/config/Config-devel.in @@ -4,11 +4,9 @@ menuconfig DEVEL bool "Advanced configuration options (for developers)" - default n config BROKEN bool "Show broken platforms / packages / devices" if DEVEL - default n config BINARY_FOLDER string "Binary folder" if DEVEL @@ -53,7 +51,6 @@ menuconfig DEVEL config AUTOREMOVE bool "Automatic removal of build directories" if DEVEL - default n help Automatically delete build directories after make target completed. This allows you to symlink build_dir into a scratch location, e.g. a ramdisk, @@ -61,7 +58,6 @@ menuconfig DEVEL config BUILD_ALL_HOST_TOOLS bool "Compile all host tools" if DEVEL - default n help Compile all host host tools even if not needed. This is needed to prepare a universal precompiled host tools archive to use in another buildroot. @@ -84,7 +80,6 @@ menuconfig DEVEL config CCACHE bool "Use ccache" if DEVEL - default n help Compiler cache; see https://ccache.samba.org/ diff --git a/config/Config-images.in b/config/Config-images.in index 6e43793ef5..0768c5a483 100644 --- a/config/Config-images.in +++ b/config/Config-images.in @@ -59,7 +59,6 @@ menu "Target Images" config TARGET_INITRAMFS_FORCE bool "Force" depends on TARGET_ROOTFS_INITRAMFS - default n help Ignore the initramfs passed by the bootloader. @@ -128,7 +127,6 @@ menu "Target Images" config TARGET_EXT4_JOURNAL bool "Create a journaling filesystem" depends on TARGET_ROOTFS_EXT4FS - default n help Create an ext4 filesystem with a journal. @@ -233,7 +231,6 @@ menu "Target Images" config GRUB_FLOWCONTROL bool "Use RTE/CTS on serial console" depends on GRUB_SERIAL != "" - default n config GRUB_BOOTOPTS string "Extra kernel boot options" @@ -312,7 +309,6 @@ menu "Target Images" config TARGET_ROOTFS_PERSIST_VAR bool "Make /var persistent" - default n help Do not symlink /var to /tmp, so that its content will persist across reboots. When enabled, /var/run will still be linked diff --git a/config/Config-kernel.in b/config/Config-kernel.in index 81b76179a5..500f72672d 100644 --- a/config/Config-kernel.in +++ b/config/Config-kernel.in @@ -47,12 +47,10 @@ config KERNEL_MIPS_FP_SUPPORT config KERNEL_ARM_PMU bool - default n depends on (arm || aarch64) config KERNEL_X86_VSYSCALL_EMULATION bool "Enable vsyscall emulation" - default n depends on x86_64 help This enables emulation of the legacy vsyscall page. Disabling @@ -70,12 +68,10 @@ config KERNEL_X86_VSYSCALL_EMULATION config KERNEL_PERF_EVENTS bool "Compile the kernel with performance events and counters" - default n select KERNEL_ARM_PMU if (arm || aarch64) config KERNEL_PROFILING bool "Compile the kernel with profiling enabled" - default n select KERNEL_PERF_EVENTS help Enable the extended profiling support mechanisms used by profilers such @@ -255,7 +251,6 @@ config KERNEL_KCOV_INSTRUMENT_ALL config KERNEL_TASKSTATS bool "Compile the kernel with task resource/io statistics and accounting" - default n help Enable the collection and publishing of task/io statistics and accounting. Enable this option to enable i/o monitoring in system @@ -283,37 +278,30 @@ config KERNEL_KALLSYMS config KERNEL_FTRACE bool "Compile the kernel with tracing support" depends on !TARGET_uml - default n config KERNEL_FTRACE_SYSCALLS bool "Trace system calls" depends on KERNEL_FTRACE - default n config KERNEL_ENABLE_DEFAULT_TRACERS bool "Trace process context switches and events" depends on KERNEL_FTRACE - default n config KERNEL_FUNCTION_TRACER bool "Function tracer" depends on KERNEL_FTRACE - default n config KERNEL_FUNCTION_GRAPH_TRACER bool "Function graph tracer" depends on KERNEL_FUNCTION_TRACER - default n config KERNEL_DYNAMIC_FTRACE bool "Enable/disable function tracing dynamically" depends on KERNEL_FUNCTION_TRACER - default n config KERNEL_FUNCTION_PROFILER bool "Function profiler" depends on KERNEL_FUNCTION_TRACER - default n config KERNEL_IRQSOFF_TRACER bool "Interrupts-off Latency Tracer" @@ -364,7 +352,6 @@ config KERNEL_HIST_TRIGGERS config KERNEL_DEBUG_KERNEL bool - default n config KERNEL_DEBUG_INFO bool "Compile the kernel with debug information" @@ -376,7 +363,6 @@ config KERNEL_DEBUG_INFO config KERNEL_DEBUG_INFO_BTF bool "Enable additional BTF type information" - default n depends on !HOST_OS_MACOS depends on KERNEL_DEBUG_INFO && !KERNEL_DEBUG_INFO_REDUCED select DWARVES @@ -403,12 +389,10 @@ config KERNEL_DEBUG_INFO_REDUCED config KERNEL_DEBUG_LL_UART_NONE bool - default n depends on arm config KERNEL_DEBUG_LL bool - default n depends on arm select KERNEL_DEBUG_LL_UART_NONE help @@ -417,7 +401,6 @@ config KERNEL_DEBUG_LL config KERNEL_DEBUG_VIRTUAL bool "Compile the kernel with VM translations debugging" select KERNEL_DEBUG_KERNEL - default n help Enable checks sanity checks to catch invalid uses of virt_to_phys()/phys_to_virt() against the non-linear address space. @@ -425,7 +408,6 @@ config KERNEL_DEBUG_VIRTUAL config KERNEL_DYNAMIC_DEBUG bool "Compile the kernel with dynamic printk" select KERNEL_DEBUG_FS - default n help Compiles debug level messages into the kernel, which would not otherwise be available at runtime. These messages can then be @@ -437,7 +419,6 @@ config KERNEL_DYNAMIC_DEBUG config KERNEL_EARLY_PRINTK bool "Compile the kernel with early printk" default y if TARGET_bcm53xx - default n depends on arm select KERNEL_DEBUG_KERNEL select KERNEL_DEBUG_LL if arm @@ -448,7 +429,6 @@ config KERNEL_EARLY_PRINTK config KERNEL_KPROBES bool "Compile the kernel with kprobes support" - default n select KERNEL_FTRACE select KERNEL_PERF_EVENTS help @@ -465,7 +445,6 @@ config KERNEL_KPROBE_EVENTS config KERNEL_BPF_EVENTS bool "Compile the kernel with BPF event support" - default n select KERNEL_KPROBES help Allows to attach BPF programs to kprobe, uprobe and tracepoint events. @@ -475,7 +454,6 @@ config KERNEL_BPF_EVENTS config KERNEL_BPF_KPROBE_OVERRIDE bool - default n depends on KERNEL_KPROBES config KERNEL_AIO @@ -496,7 +474,6 @@ config KERNEL_FANOTIFY config KERNEL_BLK_DEV_BSG bool "Compile the kernel with SCSI generic v4 support for any block device" - default n config KERNEL_TRANSPARENT_HUGEPAGE bool @@ -520,7 +497,6 @@ config KERNEL_HUGETLB_PAGE bool "Compile the kernel with HugeTLB support" select KERNEL_TRANSPARENT_HUGEPAGE select KERNEL_HUGETLBFS - default n config KERNEL_MAGIC_SYSRQ bool "Compile the kernel with SysRq support" @@ -545,7 +521,6 @@ config KERNEL_ELF_CORE config KERNEL_PROVE_LOCKING bool "Enable kernel lock checking" select KERNEL_DEBUG_KERNEL - default n config KERNEL_SOFTLOCKUP_DETECTOR bool "Compile the kernel with detect Soft Lockups" @@ -647,11 +622,9 @@ config USE_RFKILL config USE_SPARSE bool "Enable sparse check during kernel build" - default n config KERNEL_DEVTMPFS bool "Compile the kernel with device tmpfs enabled" - default n help devtmpfs is a simple, kernel-managed /dev filesystem. The kernel creates devices nodes for all registered devices to simplify boot, but leaves more @@ -661,7 +634,6 @@ if KERNEL_DEVTMPFS config KERNEL_DEVTMPFS_MOUNT bool "Automatically mount devtmpfs after root filesystem is mounted" - default n endif @@ -672,17 +644,14 @@ config KERNEL_KEYS config KERNEL_PERSISTENT_KEYRINGS bool "Enable kernel persistent keyrings" depends on KERNEL_KEYS - default n config KERNEL_KEYS_REQUEST_CACHE bool "Enable temporary caching of the last request_key() result" depends on KERNEL_KEYS - default n config KERNEL_BIG_KEYS bool "Enable large payload keys on kernel keyrings" depends on KERNEL_KEYS - default n # # CGROUP support symbols @@ -696,7 +665,6 @@ if KERNEL_CGROUPS config KERNEL_CGROUP_DEBUG bool "Example debug cgroup subsystem" - default n help This option enables a simple cgroup subsystem that exports useful debugging information about the cgroups @@ -707,7 +675,6 @@ if KERNEL_CGROUPS config KERNEL_CGROUP_FREEZER bool "legacy Freezer cgroup subsystem" - default n select KERNEL_FREEZER help Provides a way to freeze and unfreeze all tasks in a @@ -717,7 +684,6 @@ if KERNEL_CGROUPS config KERNEL_CGROUP_DEVICE bool "legacy Device controller for cgroups" - default n help Provides a cgroup implementing whitelists for devices which a process in the cgroup can mknod or open. @@ -725,7 +691,6 @@ if KERNEL_CGROUPS config KERNEL_CGROUP_HUGETLB bool "HugeTLB controller" - default n select KERNEL_HUGETLB_PAGE config KERNEL_CGROUP_PIDS @@ -754,7 +719,6 @@ if KERNEL_CGROUPS config KERNEL_PROC_PID_CPUSET bool "Include legacy /proc//cpuset file" - default n depends on KERNEL_CPUSETS config KERNEL_CGROUP_CPUACCT @@ -820,7 +784,6 @@ if KERNEL_CGROUPS config KERNEL_MEMCG_SWAP_ENABLED bool "Memory Resource Controller Swap Extension enabled by default" - default n depends on KERNEL_MEMCG_SWAP help Memory Resource Controller Swap Extension comes with its price in @@ -849,7 +812,6 @@ if KERNEL_CGROUPS config KERNEL_CGROUP_PERF bool "Enable perf_event per-cpu per-container group (cgroup) monitoring" select KERNEL_PERF_EVENTS - default n help This option extends the per-cpu mode to restrict monitoring to threads which belong to the cgroup specified and run on the @@ -926,7 +888,6 @@ if KERNEL_CGROUPS config KERNEL_DEBUG_BLK_CGROUP bool "Enable Block IO controller debugging" - default n depends on KERNEL_BLK_CGROUP help Enable some debugging help. Currently it exports additional stat @@ -934,15 +895,12 @@ if KERNEL_CGROUPS config KERNEL_NET_CLS_CGROUP bool "legacy Control Group Classifier" - default n config KERNEL_CGROUP_NET_CLASSID bool "legacy Network classid cgroup" - default n config KERNEL_CGROUP_NET_PRIO bool "legacy Network priority cgroup" - default n endif @@ -1168,7 +1126,6 @@ endif menu "Filesystem ACL and attr support options" config USE_FS_ACL_ATTR bool "Use filesystem ACL and attr support by default" - default n help Make using ACLs (e.g. POSIX ACL, NFSv4 ACL) the default for kernel and packages, except tmpfs, flash filesystems, @@ -1193,17 +1150,14 @@ menu "Filesystem ACL and attr support options" config KERNEL_F2FS_FS_POSIX_ACL bool "Enable POSIX ACL for F2FS Filesystems" select KERNEL_FS_POSIX_ACL - default n config KERNEL_JFFS2_FS_POSIX_ACL bool "Enable POSIX ACL for JFFS2 Filesystems" select KERNEL_FS_POSIX_ACL - default n config KERNEL_TMPFS_POSIX_ACL bool "Enable POSIX ACL for TMPFS Filesystems" select KERNEL_FS_POSIX_ACL - default n config KERNEL_CIFS_ACL bool "Enable CIFS ACLs" @@ -1226,15 +1180,12 @@ menu "Filesystem ACL and attr support options" config KERNEL_NFS_V3_ACL_SUPPORT bool "Enable ACLs for NFSv3" - default n config KERNEL_NFSD_V2_ACL_SUPPORT bool "Enable ACLs for NFSDv2" - default n config KERNEL_NFSD_V3_ACL_SUPPORT bool "Enable ACLs for NFSDv3" - default n config KERNEL_REISER_FS_POSIX_ACL bool "Enable POSIX ACLs for ReiserFS" diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in index 596accaa49..ae559edca1 100644 --- a/target/linux/at91/image/Config.in +++ b/target/linux/at91/image/Config.in @@ -1,10 +1,8 @@ config AT91_DFBOOT bool "Build dataflashboot loader" depends on TARGET_at91 - default n config FLEXIBITY_ROOT bool "Build Flexibity RootFS (with embedded kernel)" depends on TARGET_at91_flexibity - default n diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig index 4df2d21e34..dfcedcf70e 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig @@ -10,14 +10,12 @@ if AG71XX config AG71XX_DEBUG bool "Atheros AR71xx built-in ethernet driver debugging" - default n help Atheros AR71xx built-in ethernet driver debugging messages. config AG71XX_DEBUG_FS bool "Atheros AR71xx built-in ethernet driver debugfs support" depends on DEBUG_FS - default n help Say Y, if you need access to various statistics provided by the ag71xx driver. diff --git a/target/linux/generic/files/drivers/mtd/mtdsplit/Kconfig b/target/linux/generic/files/drivers/mtd/mtdsplit/Kconfig index f929c6153e..f1864d8fdb 100644 --- a/target/linux/generic/files/drivers/mtd/mtdsplit/Kconfig +++ b/target/linux/generic/files/drivers/mtd/mtdsplit/Kconfig @@ -12,7 +12,6 @@ config MTD_SPLIT_SQUASHFS_ROOT bool "Squashfs based root partition parser" depends on MTD_SPLIT_SUPPORT select MTD_SPLIT - default n help This provides a parsing function which allows to detect the offset and size of the unused portion of a rootfs partition diff --git a/target/linux/generic/files/drivers/platform/mikrotik/Kconfig b/target/linux/generic/files/drivers/platform/mikrotik/Kconfig index 7499ba1e1c..1dc027815a 100644 --- a/target/linux/generic/files/drivers/platform/mikrotik/Kconfig +++ b/target/linux/generic/files/drivers/platform/mikrotik/Kconfig @@ -1,6 +1,5 @@ menuconfig MIKROTIK bool "Platform support for MikroTik RouterBoard virtual devices" - default n help Say Y here to get to see options for the MikroTik RouterBoard platform. This option alone does not add any kernel code. diff --git a/target/sdk/files/Config.in b/target/sdk/files/Config.in index 12c0f6a624..7926e12426 100644 --- a/target/sdk/files/Config.in +++ b/target/sdk/files/Config.in @@ -23,7 +23,6 @@ menu "Global build settings" config DEBUG bool prompt "Compile packages with debugging info" - default n help Adds -g3 to the CFLAGS. @@ -69,7 +68,6 @@ menu "Advanced configuration options (for developers)" config BROKEN bool "Show broken packages" - default n config DOWNLOAD_FOLDER string "Download folder" @@ -101,19 +99,16 @@ menu "Advanced configuration options (for developers)" config CCACHE bool "Use ccache" - default n help Compiler cache; see https://ccache.samba.org/ config BUILD_LOG bool "Enable log files during build process" - default n help If enabled, log files will be written to the ./log directory. config SRC_TREE_OVERRIDE bool "Enable package source tree override" - default n help If enabled, you can force a package to use a git tree as source code instead of the normal tarball. Create a symlink 'git-src' diff --git a/toolchain/Config.in b/toolchain/Config.in index 6d3cc0a200..b0273acafd 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -197,7 +197,6 @@ menuconfig EXTRA_TARGET_ARCH bool prompt "Enable an extra toolchain target architecture" if TOOLCHAINOPTS depends on !sparc - default n help Some builds may require a 'biarch' toolchain. This option allows you to specify an additional target arch. @@ -252,7 +251,6 @@ config DWARVES bool prompt "Build pahole" if TOOLCHAINOPTS depends on !HOST_OS_MACOS - default n help Enable if you want to build pahole and the dwarves tools. diff --git a/toolchain/gcc/Config.in b/toolchain/gcc/Config.in index af4d54c73e..d150c9cc4b 100644 --- a/toolchain/gcc/Config.in +++ b/toolchain/gcc/Config.in @@ -27,21 +27,18 @@ config EXTRA_GCC_CONFIG_OPTIONS config GCC_DEFAULT_PIE bool prompt "Build executable with PIE enabled by default" if TOOLCHAINOPTS - default n help Use gcc configure option --enable-default-pie to turn on -fPIE and -pie by default. config GCC_DEFAULT_SSP bool prompt "Build executable with Stack-Smashing Protection enabled by default" if TOOLCHAINOPTS - default n help Use gcc configure option --enable-default-ssp to turn on -fstack-protector-strong by default. config SJLJ_EXCEPTIONS bool prompt "Use setjump()/longjump() exceptions" if TOOLCHAINOPTS - default n help Use old setjump()/longjump() exceptions instead of the newer frame unwinding exceptions handling routines. Warning: increases @@ -50,7 +47,6 @@ config SJLJ_EXCEPTIONS config INSTALL_GFORTRAN bool prompt "Build/install fortran compiler?" if TOOLCHAINOPTS - default n help Build/install GNU fortran compiler ? @@ -58,6 +54,5 @@ config INSTALL_GCCGO bool prompt "Build/install Go compiler?" if TOOLCHAINOPTS depends on USE_GLIBC || BROKEN - default n help Build/install GNU gccgo compiler ?