From 0a827d3e0194dc5c039d3170f143ae197c3d4a9e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 20 Sep 2006 16:51:34 +0000 Subject: [PATCH] remove old junk from docs/, add some info about the network config format SVN-Revision: 4805 --- openwrt/docs/buildroot-documentation.html | 710 ------------------ .../docs/hardware/4g/accesscube/cpuinfo.txt | 11 - .../hardware/4g/accesscube/dmesg-2_4_27.txt | 86 --- openwrt/docs/hardware/4g/accesscube/info.txt | 21 - .../docs/hardware/4g/accesscube/lspci-vv.txt | 28 - openwrt/docs/hardware/4g/accesscube/pci.txt | 11 - openwrt/docs/hardware/README.txt | 6 - .../docs/hardware/asus/wl-500g/cpuinfo.txt | 18 - .../hardware/asus/wl-500g/dmesg-2_4_20.txt | 78 -- .../hardware/asus/wl-500g/dmesg-2_4_29.txt | 95 --- openwrt/docs/hardware/asus/wl-500g/info.txt | 21 - openwrt/docs/hardware/asus/wl-500g/nvram.txt | 81 -- openwrt/docs/hardware/asus/wl-500g/pci.txt | 52 -- openwrt/docs/hardware/asus/wl-500gd/cfe.txt | 31 - .../docs/hardware/asus/wl-500gd/cpuinfo.txt | 12 - .../hardware/asus/wl-500gd/dmesg-2_4_29.txt | 97 --- openwrt/docs/hardware/asus/wl-500gd/info.txt | 25 - openwrt/docs/hardware/asus/wl-500gd/nvram.txt | 360 --------- openwrt/docs/hardware/asus/wl-500gd/pci.txt | 64 -- .../hardware/buffalo/wbr2-g54/cpuinfo.txt | 12 - .../buffalo/wbr2-g54/dmesg-2_4_29.txt | 89 --- .../docs/hardware/buffalo/wbr2-g54/info.txt | 19 - .../docs/hardware/buffalo/wbr2-g54/nvram.txt | 100 --- .../docs/hardware/buffalo/wbr2-g54/pci.txt | 38 - .../hardware/buffalo/wla2-g54l/cpuinfo.txt | 11 - .../buffalo/wla2-g54l/dmesg-2_4_29.txt | 85 --- .../docs/hardware/buffalo/wla2-g54l/info.txt | 18 - .../docs/hardware/buffalo/wla2-g54l/nvram.txt | 455 ----------- .../docs/hardware/buffalo/wla2-g54l/pci.txt | 37 - .../hardware/linksys/wrt54g_v11/cpuinfo.txt | 16 - .../linksys/wrt54g_v11/dmesg-2_4_29.txt | 96 --- .../hardware/linksys/wrt54g_v11/ifconfig.txt | 54 -- .../docs/hardware/linksys/wrt54g_v11/info.txt | 23 - .../hardware/linksys/wrt54g_v11/lspci-vv.txt | 92 --- .../hardware/linksys/wrt54g_v11/nvram.txt | 88 --- .../docs/hardware/linksys/wrt54g_v11/pci.txt | 56 -- .../hardware/linksys/wrt54g_v20/cpuinfo.txt | 11 - .../linksys/wrt54g_v20/dmesg-2_4_29.txt | 97 --- .../hardware/linksys/wrt54g_v20/ifconfig.txt | 46 -- .../docs/hardware/linksys/wrt54g_v20/info.txt | 19 - .../hardware/linksys/wrt54g_v20/nvram.txt | 113 --- .../docs/hardware/linksys/wrt54g_v20/pci.txt | 37 - .../hardware/linksys/wrt54g_v22/cpuinfo.txt | 16 - .../linksys/wrt54g_v22/dmesg-2_4_29.txt | 117 --- .../hardware/linksys/wrt54g_v22/ifconfig.txt | 46 -- .../docs/hardware/linksys/wrt54g_v22/info.txt | 18 - .../hardware/linksys/wrt54g_v22/nvram.txt | 477 ------------ .../docs/hardware/linksys/wrt54g_v22/pci.txt | 37 - .../hardware/linksys/wrt54gs_v10/cpuinfo.txt | 16 - .../linksys/wrt54gs_v10/dmesg-2_4_29.txt | 88 --- .../hardware/linksys/wrt54gs_v10/ifconfig.txt | 45 -- .../hardware/linksys/wrt54gs_v10/info.txt | 18 - .../hardware/linksys/wrt54gs_v10/nvram.txt | 105 --- .../docs/hardware/linksys/wrt54gs_v10/pci.txt | 37 - .../hardware/linksys/wrt54gs_v11/cpuinfo.txt | 11 - .../linksys/wrt54gs_v11/dmesg-2_4_30.txt | 83 -- .../hardware/linksys/wrt54gs_v11/info.txt | 21 - .../hardware/linksys/wrt54gs_v11/nvram.txt | 94 --- .../docs/hardware/linksys/wrt54gs_v11/pci.txt | 37 - .../hardware/motorola/WR850Gv2/cpuinfo.txt | 16 - .../motorola/WR850Gv2/dmesg-2-4-29.txt | 97 --- .../hardware/motorola/WR850Gv2/ifconfig.txt | 39 - .../docs/hardware/motorola/WR850Gv2/nvram.txt | 52 -- .../docs/hardware/motorola/WR850Gv2/pci.txt | 37 - .../docs/hardware/soekris/net4801/cpuinfo.txt | 18 - .../hardware/soekris/net4801/dmesg-2.4.30.txt | 104 --- .../docs/hardware/soekris/net4801/info.txt | 19 - openwrt/docs/hardware/soekris/net4801/pci.txt | 40 - openwrt/docs/network.txt | 50 ++ openwrt/docs/stylesheet.css | 65 -- 70 files changed, 50 insertions(+), 5172 deletions(-) delete mode 100644 openwrt/docs/buildroot-documentation.html delete mode 100644 openwrt/docs/hardware/4g/accesscube/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/4g/accesscube/dmesg-2_4_27.txt delete mode 100644 openwrt/docs/hardware/4g/accesscube/info.txt delete mode 100644 openwrt/docs/hardware/4g/accesscube/lspci-vv.txt delete mode 100644 openwrt/docs/hardware/4g/accesscube/pci.txt delete mode 100644 openwrt/docs/hardware/README.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_20.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/info.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/nvram.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500g/pci.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/cfe.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/info.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/nvram.txt delete mode 100644 openwrt/docs/hardware/asus/wl-500gd/pci.txt delete mode 100644 openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/buffalo/wbr2-g54/info.txt delete mode 100644 openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt delete mode 100644 openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt delete mode 100644 openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/buffalo/wla2-g54l/info.txt delete mode 100644 openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt delete mode 100644 openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/pci.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/ifconfig.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54g_v22/pci.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v10/pci.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt delete mode 100755 openwrt/docs/hardware/motorola/WR850Gv2/cpuinfo.txt delete mode 100755 openwrt/docs/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt delete mode 100755 openwrt/docs/hardware/motorola/WR850Gv2/ifconfig.txt delete mode 100755 openwrt/docs/hardware/motorola/WR850Gv2/nvram.txt delete mode 100755 openwrt/docs/hardware/motorola/WR850Gv2/pci.txt delete mode 100644 openwrt/docs/hardware/soekris/net4801/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt delete mode 100644 openwrt/docs/hardware/soekris/net4801/info.txt delete mode 100644 openwrt/docs/hardware/soekris/net4801/pci.txt create mode 100644 openwrt/docs/network.txt delete mode 100644 openwrt/docs/stylesheet.css diff --git a/openwrt/docs/buildroot-documentation.html b/openwrt/docs/buildroot-documentation.html deleted file mode 100644 index 4d2b00b628..0000000000 --- a/openwrt/docs/buildroot-documentation.html +++ /dev/null @@ -1,710 +0,0 @@ - - - - - - OpenWrt Buildroot - Usage and documentation - - - - - -
-
-

OpenWrt Buildroot

-
- -

Usage and documentation by Felix Fietkau and Waldemar Brodkorb, based on uClibc Buildroot - documentation by Thomas Petazzoni. Contributions from Karsten Kruse, - Ned Ludd, Martin Herren. OpenWrt Kernel Module Creation Howto by Markus Becker.

- -

Last modification : $Id$

- - - -

About OpenWrt Buildroot

- -

OpenWrt Buildroot is a set of Makefiles and patches that allows to easily - generate both a cross-compilation toolchain and a root filesystem for your - Wireless Router. The cross-compilation toolchain uses uClibc (http://www.uclibc.org/), a tiny C standard - library.

- -

A compilation toolchain is the set of tools that allows to - compile code for your system. It consists of a compiler (in our - case, gcc), binary utils like assembler and linker - (in our case, binutils) and a C standard library (for - example GNU - Libc, uClibc or dietlibc). The system - installed on your development station certainly already has a - compilation toolchain that you can use to compile application that - runs on your system. If you're using a PC, your compilation - toolchain runs on an x86 processor and generates code for a x86 - processor. Under most Linux systems, the compilation toolchain - uses the GNU libc as C standard library. This compilation - toolchain is called the "host compilation toolchain", and more - generally, the machine on which it is running, and on which you're - working is called the "host system". The compilation toolchain is - provided by your distribution, and OpenWrt Buildroot has nothing to do - with it.

- -

As said above, the compilation toolchain that comes with your system - runs and generates code for the processor of your host system. As your - embedded system has a different processor, you need a cross-compilation - toolchain: it's a compilation toolchain that runs on your host system but - that generates code for your target system (and target processor). For - example, if your host system uses x86 and your target system uses MIPS, the - regular compilation toolchain of your host runs on x86 and generates code - for x86, while the cross-compilation toolchain runs on x86 and generates - code for MIPS.

- -

You might wonder why such a tool is needed when you can compile - gcc, binutils, uClibc and all the tools by hand. - Of course, doing so is possible. But dealing with all configure options, - with all problems of every gcc or binutils - version is very time-consuming and uninteresting. OpenWrt Buildroot automates this - process through the use of Makefiles, and has a collection of patches for - each gcc and binutils version to make them work - on the MIPS architecture of most Wireless Routers.

- -

Obtaining OpenWrt Buildroot

- -

OpenWrt Buildroot is available via SVN aka subversion. - For any kind of OpenWrt development you should get the latest version from svn via:

-
- $ svn co https://svn.openwrt.org/openwrt/trunk/
-
-

If you only like to create your own custom firmware images and packages we - strongly suggest to use the SVN branch of the stable version (whiterussian): -

-
- $ svn co https://svn.openwrt.org/openwrt/branches/whiterussian/
-
- - -

Using OpenWrt Buildroot

- -

OpenWrt Buildroot has a nice configuration tool similar to the one you can find - in the Linux Kernel (http://www.kernel.org/) - or in Busybox (http://www.busybox.org/). - Note that you can run everything as a normal user. There is no need to be root to - configure and use the Buildroot. The first step is to run the configuration - assistant:

- -
- $ make menuconfig
-
- -

For each entry of the configuration tool, you can find associated help - that describes the purpose of the entry.

- -

Once everything is configured, the configuration tool has generated a - .config file that contains the description of your - configuration. It will be used by the Makefiles to do what's needed.

- -

Let's go:

- -
- $ make
-
- -

This command will download, configure and compile all the selected - tools, and finally generate target firmware images and additional packages - (depending on your selections in make menuconfig. - All the target files can be found in the bin/ subdirectory. - You can compile firmware images containing two different filesystem types: -

-

jffs2 contains a writable root filesystem, which will expand to - the size of your flash image. Note: if you use the generic firmware image, you - need to pick the right image for your flash size, because of different - eraseblock sizes.

- -

squashfs contains a read-only root filesystem using a modified - squashfs filesystem with LZMA compression. When booting it, you can - create a writable second filesystem, which will contain your modifications to - the root filesystem, including the packages you install. - -

Customizing the - target filesystem

- -

There are two ways to customize the resulting target filesystem:

- - - -

Customizing the - Busybox configuration

- -

Busybox is very configurable, and you may want to customize it. - Its configuration is completely integrated into the main menuconfig system. - You can find it under "OpenWrt Package Selection" => "Busybox Configuration"

- -

Customizing the uClibc - configuration

- -

Just like BusyBox, uClibc offers a lot of - configuration options. They allow to select various - functionalities, depending on your needs and limitations.

- -

The easiest way to modify the configuration of uClibc is to - follow these steps :

- -
    - -
  1. Make a first compilation of buildroot without trying to - customize uClibc.
    2. - -
  2. Go into the directory - toolchain_build_ARCH/uClibc/ and run make - menuconfig. The nice configuration assistant, similar to - the one used in the Linux Kernel appears. Make - your configuration as appropriate.
    3. - -
  3. Copy the .config file to - toolchain/uClibc/uClibc.config or - toolchain/uClibc/uClibc.config-locale. The former - is used if you haven't selected locale support in the Buildroot - configuration, and the latter is used if you have selected - locale support.
    4. - -
  4. Run the compilation again.
    5. - -
- -

Otherwise, you can simply change - toolchain/uClibc/uClibc.config or - toolchain/uClibc/uClibc.config-locale without running - the configuration assistant.

- -

How OpenWrt Buildroot - works

- -

As said above, OpenWrt is basically a set of Makefiles that download, - configure and compiles software with the correct options. It also includes - some patches for various software, mainly the ones involved in the - cross-compilation tool chain (gcc, binutils and - uClibc).

- -

There is basically one Makefile per software, and they are named Makefile. - Makefiles are split into three sections:

- - - -

Each directory contains at least 2 files :

- - - -

The main Makefile do the job through the following steps (once the - configuration is done):

- -
    -
  1. Create the download directory (dl/ by default). This is - where the tarballs will be downloaded. It is interesting to know that the - tarballs are in this directory because it may be useful to save them - somewhere to avoid further downloads.
    2. - -
  2. Create the build directory (build_ARCH/ by default, - where ARCH is your architecture). This is where all - user-space tools while be compiled.
    3. - -
  3. Create the toolchain build directory - (toolchain_build_ARCH/ by default, where ARCH - is your architecture). This is where the cross compilation toolchain will - be compiled.
    4. - -
  4. Setup the staging directory (staging_dir_ARCH/ by - default). This is where the cross-compilation toolchain will be - installed. If you want to use the same cross-compilation toolchain for - other purposes, such as compiling third-party applications, you can add - staging_dir_ARCH/bin to your PATH, and then use - arch-linux-gcc to compile your application. In order to - setup this staging directory, it first removes it, and then it creates - various subdirectories and symlinks inside it.
    5. - -
  5. Create the target directory (build_ARCH/root/ by - default) and the target filesystem skeleton. This directory will contain - the final root filesystem. To set it up, it first deletes it, then it - copies the skeleton available in target/default/target_skeleton - and then removes useless SVN/ directories.
    6. - -
  6. Call the prepare, compile and install - targets for the subdirectories toolchain, package - and target
    7. -
- -

Using the - uClibc toolchain

- -

You may want to compile your own programs or other software - that are not packaged in OpenWrt. In order to do this, you can - use the toolchain that was generated by the Buildroot.

- -

The toolchain generated by the Buildroot by default is located in - staging_dir_ARCH. The simplest way to use it - is to add staging_dir_ARCH/bin/ to your PATH - environment variable, and then to use - arch-linux-gcc, arch-linux-objdump, - arch-linux-ld, etc.

- -

For example, you may add the following to your - .bashrc (considering you're building for the MIPS - architecture and that Buildroot is located in - ~/openwrt/) :

- -
-export PATH=$PATH:~/openwrt/staging_dir_mipsel/bin/
-
- -

Then you can simply do :

- -
-mipsel-linux-uclibc-gcc -o foo foo.c
-
- -

Important : do not try to move the toolchain to an other - directory, it won't work. There are some hard-coded paths in the - gcc configuration. If the default toolchain directory - doesn't suit your needs, please refer to the Using the uClibc toolchain outside of - buildroot section.

- -

Using the - uClibc toolchain outside of buildroot

- -

By default, the cross-compilation toolchain is generated inside - staging_dir_ARCH/. But sometimes, it may be useful to - install it somewhere else, so that it can be used to compile other programs - or by other users. Moving the staging_dir_ARCH/ - directory elsewhere is not possible, because they are some hardcoded - paths in the toolchain configuration.

- -

If you want to use the generated toolchain for other purposes, - you can configure Buildroot to generate it elsewhere using the - option of the configuration tool : Build options -> - Toolchain and header file location, which defaults to - staging_dir_ARCH/.

- -

Location of downloaded packages

- -

It might be useful to know that the various tarballs that are - downloaded by the Makefiles are all stored in the - DL_DIR which by default is the dl - directory. It's useful for example if you want to keep a complete - version of Buildroot which is known to be working with the - associated tarballs. This will allow you to regenerate the - toolchain and the target filesystem with exactly the same - versions.

- -

Extending OpenWrt with - more software

- -

This section will only consider the case in which you want to - add user-space software.

- -

Package directory

- -

First of all, create a directory under the package - directory for your software, for example foo.

- -

Config.in file

- -

Then, create a file named Config.in. This file - will contain the portion of options description related to our - foo software that will be used and displayed in the - configuration tool. It should basically contain :

- -
-config BR2_PACKAGE_FOO
-        tristate "foo - some nice tool"
-        default m if CONFIG_DEVEL
-        help
-	     This is a comment that explains what foo is.
-
- -

If you depend on other software or library inside the Buildroot, it - is important that you automatically select these packages in your - Config.in. Example if foo depends on bar library: -

-
-config BR2_PACKAGE_FOO
-        tristate "foo - some nice tool"
-        default m if CONFIG_DEVEL
-	select BR2_PACKAGE_LIBBAR
-        help
-        This is a comment that explains what foo is.
-
- -

Of course, you can add other options to configure particular - things in your software.

- -

Config.in in the package directory

- -

To add your package to the configuration tool, you need - to add the following line to package/Config.in, - please add it to a section, which fits the purpose of foo: - -

-comment "Networking"
-source "package/foo/Config.in"
-
- -

Makefile in the package directory

- -

To add your package to the build process, you need to edit - the Makefile in the package/ directory. Locate the - lines that look like the following:

- -
-package-$(BR2_PACKAGE_FOO) += foo
-
- -

As you can see, this short line simply adds the target - foo to the list of targets handled by OpenWrt Buildroot.

- -

In addition to the default dependencies, you make your package - depend on another package (e.g. a library) by adding a line: - -

-foo-compile: bar-compile
-
- -

The ipkg control file

-

Additionally, you need to create a control file which contains - information about your package, readable by the ipkg package - utility. It should be created as file: - package/foo/ipkg/foo.control

- -

The file looks like this

- -
-     1  Package: foo
-     2  Priority: optional
-     3  Section: net
-     4  Maintainer: Foo Software <foo@foosoftware.com>
-     5  Source: http://foosoftware.com
-     6  Depends: libbar
-     7  Description: Package Description
-
- -

You can skip the usual Version: and Architecture - fields, as they will be generated by the make-ipkg-dir.sh script - called from your Makefile. The Depends field is important, so that ipkg will - automatically fetch all dependend software on your target system.

- -

The real Makefile

- -

Finally, here's the hardest part. Create a file named - Makefile. It will contain the Makefile rules that - are in charge of downloading, configuring, compiling and installing - the software. Below is an example that we will comment afterwards.

- -
-     1  # $Id$
-     2	
-     3  include $(TOPDIR)/rules.mk
-     4
-     5  PKG_NAME:=foo
-     6  PKG_VERSION:=1.0
-     7  PKG_RELEASE:=1
-     8  PKG_MD5SUM:=4584f226523776a3cdd2fb6f8212ba8d
-     9 
-    10  PKG_SOURCE_URL:=http://www.foosoftware.org/downloads
-    11  PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-    12 	PKG_CAT:=zcat
-    13	
-    14	PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-    15	PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-    16
-    17	include $(TOPDIR)/package/rules.mk
-    18
-    19	$(eval $(call PKG_template,FOO,foo,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH)))
-    20
-    21  $(PKG_BUILD_DIR)/.configured: $(PKG_BUILD_DIR)/.prepared
-    22          (cd $(PKG_BUILD_DIR); \
-    23                  $(TARGET_CONFIGURE_OPTS) \
-    24                  CFLAGS="$(TARGET_CFLAGS)" \
-    25                  ./configure \
-    26                  --target=$(GNU_TARGET_NAME) \
-    27                  --host=$(GNU_TARGET_NAME) \
-    28                  --build=$(GNU_HOST_NAME) \
-    29                  --prefix=/usr \
-    30                  --sysconfdir=/etc \
-    31 			--with-bar="$(STAGING_DIR)/usr" \
-    32          );
-    33          touch $@
-    34
-    35  $(PKG_BUILD_DIR)/.built:
-    36      	rm -rf $(PKG_INSTALL_DIR)
-    37		mkdir -p $(PKG_INSTALL_DIR)
-    38		$(MAKE) -C $(PKG_BUILD_DIR) \
-    39 	          $(TARGET_CONFIGURE_OPTS) \
-    40            install_prefix="$(PKG_INSTALL_DIR)" \
-    41 	          all install
-    42		touch $@
-    43 
-    44  $(IPKG_FOO):
-    46		install -d -m0755 $(IDIR_FOO)/usr/sbin
-    47    	cp -fpR $(PKG_INSTALL_DIR)/usr/sbin/foo $(IDIR_FOO)/usr/sbin
-    49		$(RSTRIP) $(IDIR_FOO)
-    50		$(IPKG_BUILD) $(IDIR_FOO) $(PACKAGE_DIR)
-    51	
-    52	mostlyclean:
-    53  	make -C $(PKG_BUILD_DIR) clean
-    54    	rm $(PKG_BUILD_DIR)/.built
-
- -

First of all, this Makefile example works for a single - binary software. For other software such as libraries or more - complex stuff with multiple binaries, it should be adapted. Look at - the other Makefile files in the package/ - directory.

- -

At lines 5-15, a couple of useful variables are defined:

- - - -

In Line 3 and 17 we include common variables and routines to simplify - the process of ipkg creation. It includes routines to download, verify - and extract the software package archives.

- -

Line 19 contains the magic line which automatically creates the - ipkg for us.

- -

Lines 21-33 defines a target and associated rules that - configures the software. It depends on the previous target (the - hidden .prepared file) so that we are sure the software has - been uncompressed. In order to configure it, it basically runs the - well-known ./configurescript. As we may be doing - cross-compilation, target, host and - build arguments are given. The prefix is also set to - /usr, not because the software will be installed in - /usr on your host system, but in the target - filesystem. Finally it creates a .configured file to - mark the software as configured.

- -

Lines 35-42 defines a target and a rule that compiles the - software. This target will create the binary file in the - compilation directory, and depends on the software being already - configured (hence the reference to the .configured - file). Afterwards it installs the resulting binary into the - PKG_INSTALL_DIR. It basically runs - make install inside the source directory.

- -

Lines 44-50 defines a target and associated rules that create - the ipkg package, which can optionally be embedded into - the resulting firmware image. It manually installs all files you - want to integrate in your resulting ipkg. RSTRIP will - recursevily strip all binaries and libraries. - Finally IPKG_BUILD is called to create the package.

- -

Conclusion

- -

As you can see, adding a software to buildroot is simply a - matter of writing a Makefile using an already existing - example and to modify it according to the compilation process of - the software.

- -

If you package software that might be useful for other persons, - don't forget to send a patch to OpenWrt developers! - Use the mail address: openwrt-devel@openwrt.org -

- -

Resources

- -

To learn more about OpenWrt you can visit this website: - http://openwrt.org/

- -
- -
-
-

OpenWrt Kernel Module Creation Howto

-
- -

About OpenWrt Kernel Module Compilation

- -

You are planning to compile a kernel module? This howto will -explain what you have to do, to have your kernel module installable as -an ipkg.

- -

Enable the kernel options

- -

Enable the kernel options you want by modifying -build_mipsel/linux/.config. We are assuming, that you already had your -kernel compiled once here. You can do the modification by hand or by - -

-$ cd build_mipsel/linux
-$ make menuconfig
-
- -And copy it, so your changes are not getting lost, when doing a 'make -dirclean'. Here we assume that you are compiling for Broadcom chipset -based devices: - -
 $ cp .config ../../../target/linux/linux-2.4/config/brcm
- -

-

Create a buildroot option

- -

Create a buildroot option by modifying/inserting into -target/linux/Config.in, e.g. - -

-config BR2_PACKAGE_KMOD_USB_KEYBOARD
-        tristate "Support for USB keyboards"
-        default m
-        depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-

- -

Define the binary files for the kernel module

- -

Define the binary files for the kernel module by modifying/inserting into -target/linux/linux-2.4/Makefile, e.g. - -

-$(eval $(call KMOD_template,USB_KEYBOARD,usb-kbd,\
-	$(MODULES_DIR)/kernel/drivers/input/input.o \
-	$(MODULES_DIR)/kernel/drivers/input/keybdev.o \
-	$(MODULES_DIR)/kernel/drivers/usb/usbkbd.o \
-,CONFIG_USB_KEYB,kmod-usb-core,60,input keybdev usbkbd))
-
- -Where CONFIG_USB_KEYB is the kernel option, USB_KEYBOARD is the last -part of BR2_PACKAGE_KMOD_USB_KEYBOARD and usb-kbd is part of the -filename of the created ipkg.

- -

Specify the ipkg control file

- -

Create e.g. target/linux/control/kmod-usb-kbd.control with content similar to this: - -

-Package: kmod-usb-kbd
-Priority: optional
-Section: sys
-Maintainer: Markus Becker <mab@comnets.uni-bremen.de>
-Source: buildroot internal
-Description: Kernel Support for USB Keyboards
-
-

- -

Compile the kernel module

- -

Enable the kernel module with -

-$ make menuconfig
-
- in TOPDIR and selecting it.
- - Compile with -
-$ make dirclean && make
-
-

-
- - - diff --git a/openwrt/docs/hardware/4g/accesscube/cpuinfo.txt b/openwrt/docs/hardware/4g/accesscube/cpuinfo.txt deleted file mode 100644 index f3489a30ad..0000000000 --- a/openwrt/docs/hardware/4g/accesscube/cpuinfo.txt +++ /dev/null @@ -1,11 +0,0 @@ -system type : MTX-1 -processor : 0 -cpu model : Au1500 V0.2 -BogoMIPS : 395.67 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : yes -hardware watchpoint : yes -VCED exceptions : not available -VCEI exceptions : not available diff --git a/openwrt/docs/hardware/4g/accesscube/dmesg-2_4_27.txt b/openwrt/docs/hardware/4g/accesscube/dmesg-2_4_27.txt deleted file mode 100644 index 31daebff17..0000000000 --- a/openwrt/docs/hardware/4g/accesscube/dmesg-2_4_27.txt +++ /dev/null @@ -1,86 +0,0 @@ -CPU revision is: 01030202 -Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. -Primary data cache 16kB, 4-way, linesize 32 bytes. -Linux version 2.4.27 (rhandorf@devel) (gcc version 3.3.4) #1 Mon Dec 5 -15:55:07 EST 2005 -4G Systems MTX-1 Board -Au1500 AD (PRId 01030202) @ 396MHZ -BCLK switching enabled! -Determined physical RAM map: - memory: 04000000 @ 00000000 (usable) -On node 0 totalpages: 16384 -zone(0): 16384 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock/0 console=ttyS0,115200 -usb_ohci=base:0x10100000,len:0x100000,irq:26 -calculating r4koff... 003c6cc0(3960000) -CPU frequency 396.00 MHz -Calibrating delay loop... 395.67 BogoMIPS -Memory: 61504k/65536k available (1769k kernel code, 4032k reserved, 260k data, -88k init, 0k highmem) -Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) -Inode cache hash table entries: 4096 (order: 3, 32768 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) -Page-cache hash table entries: 16384 (order: 4, 65536 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -Autoconfig PCI channel 0x80316838 -Scanning bus 00, I/O 0x00000300:0x00100000, Mem 0x40000000:0x50000000 -00:00.0 Class 0200: 168c:001b (rev 01) - Mem at 0x40000000 [size=0x10000] -00:01.0 Class 0200: 168c:001b (rev 01) - Mem at 0x40010000 [size=0x10000] -Non-coherent PCI accesses enabled -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -Installing knfsd (copyright (C) 1996 okir@monad.swb.de). -JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. -pty: 256 Unix98 ptys configured -Serial driver version 1.01 (2001-02-08) with no serial options enabled -ttyS00 at 0xb1100000 (irq = 0) is a 16550 -ttyS01 at 0xb1400000 (irq = 3) is a 16550 -loop: loaded (max 8 devices) -au1000eth.c:1.4 ppopov@mvista.com -eth0: Au1x Ethernet found at 0xb1500000, irq 28 -eth0: LSI 80227 10/100 BaseT PHY at phy address 31 -eth0: Using LSI 80227 10/100 BaseT PHY as default -MTX-1 flash: probing 32-bit flash bus at 1e000000 -MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit mode - Amd/Fujitsu Extended Query Table at 0x0040 -MTX-1 flash: CFI does not contain boot bank location. Assuming top. -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. -Creating 4 MTD partitions on "MTX-1 flash": -0x00000000-0x01c00000 : "user fs" -0x01c00000-0x01d00000 : "yamon" -0x01d00000-0x01fc0000 : "raw kernel" -0x01fc0000-0x02000000 : "yamon environment" -usb.c: registered new driver usbdevfs -usb.c: registered new driver hub -host/usb-ohci.c: USB OHCI at membase 0xb0100000, IRQ 26 -host/usb-ohci.c: usb-builtin, non-PCI OHCI -usb.c: new USB bus registered, assigned bus number 1 -hub.c: USB hub found -hub.c: 2 ports detected -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 4096 bind 8192) -Linux IP multicast router 0.06 plus PIM-SM -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -MTX-1 watchdog driver -MTX-1 System Button driver -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -eth0: link up -eth0: going to full duplex diff --git a/openwrt/docs/hardware/4g/accesscube/info.txt b/openwrt/docs/hardware/4g/accesscube/info.txt deleted file mode 100644 index 2f82f533d6..0000000000 --- a/openwrt/docs/hardware/4g/accesscube/info.txt +++ /dev/null @@ -1,21 +0,0 @@ -4G Systems Access Cube - -Online description from 4G systems : -http://www.accesscube.com - -CPU: AMD Alchemy 1500 @ 400 Mhz -RAM: 64 MB -Flash: -serial port possible -JTAG port possible -Mini-PCI slot expansions -Delivered with 2x 6th generation Atheros Wireless Cards - -List of files: -cpuinfo.txt: contents of /proc/cpuinfo (2.4.27) -pci.txt: contents of /proc/pci (2.4.27) -dmesg-2_4_27.txt: dmesg from 2.4.27 kernel -lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) - --- -florian diff --git a/openwrt/docs/hardware/4g/accesscube/lspci-vv.txt b/openwrt/docs/hardware/4g/accesscube/lspci-vv.txt deleted file mode 100644 index 1e06cc651b..0000000000 --- a/openwrt/docs/hardware/4g/accesscube/lspci-vv.txt +++ /dev/null @@ -1,28 +0,0 @@ -00:00.0 Class 0200: 168c:001b (rev 01) - Subsystem: 168c:2063 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- -Stepping- SERR- FastB2B- - Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- -SERR- TAbort- -SERR- -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 68k freed -Warning: unable to open an initial console. -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 0000041a -using v1 hardware -jffs2.bbc: SIZE compression mode activated. -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10 -eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10 -PCI: Enabling device 01:02.0 (0004 -> 0006) -eth2: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004) -device eth0 entered promiscuous mode diff --git a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt deleted file mode 100644 index 20e1c95e1b..0000000000 --- a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt +++ /dev/null @@ -1,95 +0,0 @@ -CPU revision is: 00024000 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 -Determined physical RAM map: -memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4710 rev 0 at 125 MHz -Using 62.400 MHz high precision timer. -!unable to setup serial console! -Calibrating delay loop... 82.94 BogoMIPS -Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Fixing up bus 0 -PCI: Fixing up bridge -PCI: Setting latency timer of device 01:00.0 to 64 -PCI: Fixing up bus 1 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Amd/Fujitsu Extended Query Table v1.0 at 0x0040 -Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table. -Physically mapped flash: Swapping erase regions for broken CFI table. -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1fc00000 -Physically mapped flash: squashfs filesystem found at block 946 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000ec990-0x001ceb48 : "rootfs" -mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only -0x003f0000-0x00400000 : "nvram" -0x001d0000-0x003f0000 : "OpenWrt" -sflash: chipcommon not found -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Warning: unable to open an initial console. -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 0000041a -using v1 hardware -led -> 00 -led -> 01 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:08.0 to 64 -5325E phy=FFFFFFFF -eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 01:02.0 to 64 -PCI: Enabling device 01:02.0 (0004 -> 0006) -eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -device eth2 entered promiscuous mode -eth2: attempt to add interface with same source address. -br0: port 2(eth2) entering learning state -br0: port 1(eth0) entering learning state -br0: port 2(eth2) entering forwarding state -br0: topology change detected, propagating -br0: port 1(eth0) entering forwarding state -br0: topology change detected, propagating -led -> 00 diff --git a/openwrt/docs/hardware/asus/wl-500g/info.txt b/openwrt/docs/hardware/asus/wl-500g/info.txt deleted file mode 100644 index cae68607c5..0000000000 --- a/openwrt/docs/hardware/asus/wl-500g/info.txt +++ /dev/null @@ -1,21 +0,0 @@ -Asus WL-500g - -Online Description from Asus: -http://www.asus.com/products/communication/wireless/wl-500g/overview.htm - -CPU: BCM4710 at 125 MHz -RAM: 16 MB -Flash: 4 MB -2 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM43XX 802.11 Wireless Controller -USB 1.1 -parallel port -no serial -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.20) -pci.txt: contents of /proc/pci (2.4.20) -dmesg-2_4_20.txt: dmesg from Kernel 2.4.20 -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/openwrt/docs/hardware/asus/wl-500g/nvram.txt b/openwrt/docs/hardware/asus/wl-500g/nvram.txt deleted file mode 100644 index a9a8ba0234..0000000000 --- a/openwrt/docs/hardware/asus/wl-500g/nvram.txt +++ /dev/null @@ -1,81 +0,0 @@ -The content of the original nvram after flashing with OpenWRT: - -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=on -et0macaddr=00:11:D8:18:B9:08 -wl0_wep_buf= -watchdog=3000 -boot_wait=on -wl0_macmode1=disabled -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -pmon_ver=PMON 3.11.19.0 -wl0_ifname=eth2 -wl0_mode=ap -os_flash_addr=bfc40000 -wl0_gmode=1 -boardtype=bcm94710dev -et1macaddr=00:11:D8:18:B9:08 -wl0_wep_last= -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=linksys -et1mdcport=1 -wl0_key1= -wl0_key2= -wl0_key3= -wl0_key4= -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=0 -wl0_macmode=disabled -wl0_radioids=BCM2050 -wl0_phytype=g -wl0_lazywds=1 -wl0_antdiv=-1 -wl0_wpa_psk= -wl0_mac_list= -wl0_unit=0 -wl_country_code=AU -wl0_wds= -wl0_radius_port=1812 -wl0_mac_deny= -wl0_auth=0 -wl0_radius_ipaddr= -lan_ipaddr=192.168.1.1 -clkfreq=125 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=off -sdram_config=0x0000 -wl0_country=Worldwide -scratch=a0180000 -wl0_rateset=default -wl0_wep_bit=64 -wl0_afterburner_override=-1 -sdram_refresh=0x8040 -sdram_ncdl=0x00000000 -hardware_version=WL500-02-02-01-00 -wl0_passphrase= -wl0_rts=2347 -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -wl0_active_mac= -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:11:D8:18:B9:08 -wl0_wep_gen= -wl0_gmode_protection=auto -wl0_maclist= -sdram_init=0x0419 -dl_ram_addr=a0001000 -wl0_radius_key= -regulation_domain=0X30DE -wl0_corerev=5 -wl0_channel=6 -wl0_auth_mode=disabled -et1phyaddr=0 -boardnum=asusX diff --git a/openwrt/docs/hardware/asus/wl-500g/pci.txt b/openwrt/docs/hardware/asus/wl-500g/pci.txt deleted file mode 100644 index 81976669a4..0000000000 --- a/openwrt/docs/hardware/asus/wl-500g/pci.txt +++ /dev/null @@ -1,52 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0500: PCI device 14e4:0803 (rev 0). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff]. - Bus 0, device 1, function 0: - Class 0200: PCI device 14e4:4711 (rev 0). - IRQ 5. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 0). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0703: PCI device 14e4:4712 (rev 0). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4715 (rev 0). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0604: PCI device 14e4:0804 (rev 0). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff]. - Bus 0, device 6, function 0: - Class 0b30: PCI device 14e4:0805 (rev 0). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff]. - Bus 0, device 7, function 0: - Class 0501: PCI device 14e4:0811 (rev 0). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff]. - Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff]. - Bus 0, device 8, function 0: - Class 0200: PCI device 14e4:4713 (rev 0). - IRQ 4. - Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff]. - Bus 1, device 0, function 0: - Class 0600: PCI device 14e4:4710 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff]. - Prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Bus 1, device 2, function 0: - Class 0280: PCI device 14e4:4320 (rev 3). - IRQ 6. - Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff]. diff --git a/openwrt/docs/hardware/asus/wl-500gd/cfe.txt b/openwrt/docs/hardware/asus/wl-500gd/cfe.txt deleted file mode 100644 index 72109c62d6..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/cfe.txt +++ /dev/null @@ -1,31 +0,0 @@ -CFE version 1.0.37 for BCM947XX (32bit,SP,LE) -Build Date: ¤G 3¤ë 1 16:49:41 CST 2005 (root@PaNLinux) -Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. - -Initializing Arena. -Initializing Devices. -et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1.3.2.0 -rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) -CPU type 0x29007: 200MHz -Total memory: 0x2000000 bytes (32MB) - -Total memory used by CFE: 0x80300000 - 0x80436F10 (1273616) -Initialized Data: 0x803313D0 - 0x80333760 (9104) -BSS Area: 0x80333760 - 0x80334F10 (6064) -Local Heap: 0x80334F10 - 0x80434F10 (1048576) -Stack Area: 0x80434F10 - 0x80436F10 (8192) -Text (code) segment: 0x80300000 - 0x803313D0 (201680) -Boot area (physical): 0x00437000 - 0x00477000 -Relocation Factor: I:00000000 - D:00000000 - -Device eth0: hwaddr 00-11-D8-01-CB-3E, ipaddr 192.168.1.1, mask 255.255.255.0 - gateway not set, nameserver not set -Rescue Flag disable. -Reading :: TFTP Server. -Failed.: Timeout occured -Lader:raw Filesys:raw Dev:flash0.os File: Options:(null) -Loading: ...... 1662976 bytes read -Entry at 0x80001000 -Closing network. -Starting program at 0x80001000 - diff --git a/openwrt/docs/hardware/asus/wl-500gd/cpuinfo.txt b/openwrt/docs/hardware/asus/wl-500gd/cpuinfo.txt deleted file mode 100644 index 335b012b92..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/cpuinfo.txt +++ /dev/null @@ -1,12 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.47 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available - diff --git a/openwrt/docs/hardware/asus/wl-500gd/dmesg-2_4_29.txt b/openwrt/docs/hardware/asus/wl-500gd/dmesg-2_4_29.txt deleted file mode 100644 index 4a242e832e..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/dmesg-2_4_29.txt +++ /dev/null @@ -1,97 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 -Determined physical RAM map: - memory: 02000000 @ 00000000 (usable) -On node 0 totalpages: 8192 -zone(0): 8192 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM5365 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.47 BogoMIPS -Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) -Inode cache hash table entries: 2048 (order: 2, 16384 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 8192 (order: 3, 32768 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Fixing up bus 0 -PCI: Fixing up bridge -PCI: Setting latency timer of device 01:00.0 to 64 -PCI: Fixing up bus 1 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 - Amd/Fujitsu Extended Query Table v1.1 at 0x0040 -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000f0000-0x003f0000 : "rootfs" -0x003f0000-0x00400000 : "nvram" -sflash: found no supported devices -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 2048 bind 4096) -ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000000 -using v2 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:01.0 to 64 -5325E phy=0 -5325E VLAN programming for BCM5325E-MDIO I/F switch -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 01:03.0 to 64 -PCI: Enabling device 01:03.0 (0004 -> 0006) -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -eth1: attempt to add interface with same source address. -br0: port 2(eth1) entering listening state -br0: port 1(vlan0) entering listening state -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface - diff --git a/openwrt/docs/hardware/asus/wl-500gd/info.txt b/openwrt/docs/hardware/asus/wl-500gd/info.txt deleted file mode 100644 index 490371465f..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/info.txt +++ /dev/null @@ -1,25 +0,0 @@ -Asus WL-500g Deluxe (aka Wl-500GD, WL-500GX) - -Online Description from Asus: -http://www.asus.com/prog/spec.asp?m=WL-%20500g%20Deluxe&langs=01 - -CPU: BCM5365 at 200 MHz (integrated switch) -RAM: 32 MB -Flash: 4 MB -1 Broadcom BCM47XX 10/100Mbps Ethernet Controller -1 Broadcom BCM43XX 802.11 Wireless Controller -2 USB2.0 external -2 USB2.0 internal -2 serial internal -no JTAG - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 -cfe.txt: output of the bootloader - -Notes: -Earlier models came with only 16MB ram activated. Please check -http://forum.chupa.nl/showthread.php?t=1704 for more info. diff --git a/openwrt/docs/hardware/asus/wl-500gd/nvram.txt b/openwrt/docs/hardware/asus/wl-500gd/nvram.txt deleted file mode 100644 index 82db2325fb..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/nvram.txt +++ /dev/null @@ -1,360 +0,0 @@ -wl_radius_port=1812 -usb_webremote6_x= -wl_mode_x=0 -filter_lw_dstport_x= -wan_unit=0 -wl0_net_mode=mixed -os_ram_addr=80001000 -wan_route= -wl0_frameburst=0 -qos_enable_x=0 -misc_ping_x=0 -wan_pppoe_keepalive=0 -filter_wl_default_x=ACCEPT -log_ipaddr= -boardrev=0x10 -wl_gmode_protection_x=0 -wl_wdsapply_x=0 -usb_webremote2_x= -et0macaddr=00:11:D8:01:CB:3E -wan_pppoe_passwd= -watchdog=5000 -boot_wait=on -wl_phytypes= -rescueflag=disable -wl0_infra=1 -wan_mode_x=2 -wl0_country_code=AU -fw_disable=0 -et0mdcport=0 -usb_webmserver_x= -dhcp_dns1_x= -filter_lw_dstip_x= -wan_nat_x=1 -wl_infra=1 -reset_gpio=7 -wl_maclist_x= -filter_wl_time_x=00002359 -pmon_ver=CFE 1.3.2.0 -restore_defaults=0 -wl_radio_x=1 -vts_proto_x= -vts_ipaddr_x= -filter_lw_time_x=00002359 -wan_pppoe_service= -wan_lease=86400 -ddns_status_t= -wl_radius_ipaddr= -http_wanport= -usb_websecurity_time_x=00002359 -lan_gateway= -wl0_ifname=eth1 -wan_pppoe_txonly_x=0 -lan_domain= -timer_interval=3600 -wl_wdsnum_x=0 -usb_ftpusername_x= -usb_webactivex_x=7777 -forward_port0= -dr_staticnum_x=0 -lan_ipaddr_t= -wan_pppoe_mru=1492 -vts_desc_x= -wl0_mode=ap -wan_gateway= -usb_webrectime_x=0 -dhcp_staticmac_x= -time_interval=20 -dhcp_start=192.168.1.2 -usb_websecurity_x=0 -url_keyword_x= -wan_etherspeed_x=auto -wl0_ap_isolate=0 -dr_staticgateway_x= -vts_port_x= -usb_webfresh_x=1 -dhcp_end=192.168.1.254 -filter_wl_date_x=1111111 -os_flash_addr=bfc40000 -wl0_gmode=1 -dhcp_lease=86400 -usb_ftpnum_x=0 -filter_wl_icmp_x= -boardtype=bcm95365r -filter_lw_proto_x= -is_default=1 -usb_ftprights_x= -usb_ftpport_x=21 -url_num_x=0 -filter_lw_date_x=1111111 -wl_gmode=1 -wan_gateway_t= -stats_server= -ntp_server0=time.nist.gov -usb_websecurity_date_x=1111111 -ntp_server1= -filter_lw_icmp_x= -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=default -filter_wl_dstport_x= -http_username=admin -usb_ftpbanip_x= -usb_ftpenable_x=1 -fw_wl_enable_x=0 -os_date=Oct 11 2004 -usb_webremote5_x= -http_lanport=80 -wl_plcphdr=long -wl_macmode=disabled -wan_domain= -wan_hwname= -wl0_key1= -wl_phytype=b -wan_netmask= -lan_lease=86400 -wl0_key2= -wl_lazywds=0 -wl0_key3= -macfilter_num_x=0 -wl0_key4= -filter_client0= -ddns_username_x= -wan_hwaddr_x= -filter_maclist= -wl_auth_mode=open -usb_webremote1_x= -usb_webhttpcheck_x=0 -usb_websense_x=1 -autofw_outport_x= -misc_lpr_x=0 -usb_ftpstaytimeout_x=240 -filter_lw_num_x=0 -filter_wl_num_x=0 -sp_battle_ips=1 -wl_wpa_psk= -http_passwd=admin -qos_ipaddr_x= -wan_pppoe_demand=0 -lan_stp=1 -fw_lw_enable_x=0 -wl_mode=ap -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=0 -wl0_macmode=disabled -wl_wpa_gtk_rekey=0 -wl0_radioids=BCM2050 -wl0_phytype=g -wl0_lazywds=0 -dr_default_x=1 -filter_wl_dstip_x= -autofw_inport_x= -wan_route_x=IP_Routed -wl0_afterburner=off -dr_staticnetmask_x=0 -wl0_antdiv=-1 -lan_hwaddr= -wan_dns= -filter_lw_srcip_x= -wl_mode_ex=ap -wan_dns2_x= -wl_dtim=1 -wl_ssid=default -wl0_wpa_psk= -dhcp_staticnum_x=0 -wan_pppoe_mtu=1492 -usb_webcaption_x=Web Camera Live Demo!!! -wan_netmask_t= -dhcp_wins=wan -wl_macapply_x=Both -os_server= -dr_static_matric_x=1 -wl_key1= -wan_proto=dhcp -sr_num_x=0 -wl_key2= -wl0_unit=0 -wan_ipaddr_t= -wl_key3= -wl_country_code=AU -wl_key4= -wl_hwaddr= -ddns_enable_x=0 -sr_if_x= -usb_websendto_x= -wan_pppoe_idletime=1800 -wl0_wds= -filter_wl_proto_x= -usb_ftpmax_x=12 -sr_rip_x=0 -wl_rate=0 -log_level=0 -ntp_server=192.5.41.40 192.5.41.41 133.100.9.2 -wan_hwaddr= -usb_webremote4_x= -sr_enable_x=0 -misc_http_x=0 -wl_phrase_x= -lan_ifnames=eth0 eth1 -wl0_radius_port=1812 -wl0_auth=0 -wl0_radius_ipaddr= -ddns_wildcard_x=0 -lan_hostname= -wl_country= -vlan_enable=1 -qos_priority_x= -wl_wep_x=0 -filter_lw_srcport_x= -usb_webhttpport_x=7776 -wan_pppoe_username= -wan_ifnames=eth0 -wl_crypto=0 -wl_rateset=default -usb_webremote_x=LAN Only -lan_gateway_t= -qos_maxbw_x= -autofw_num_x=0 -wl_radius_key= -lan_proto=dhcp -os_name=linux -lan_ipaddr=192.168.1.1 -clkfreq=200 -url_enable_x=0 -wan_dns_t= -wl_unit=0 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -router_disable=0 -sdram_config=0x32 -wl0_country= -wl_wdslist_x= -dhcp_gateway_x= -usb_ftpsuper_x=0 -dmz_ipaddr= -wl_wds= -scratch=a0180000 -wl0_rateset=default -usb_ftppasswd_x= -wan_dns1_x= -usb_ftpanonymous_x=1 -wan_primary=0 -lan_ifname=br0 -usb_webmode_x=1 -filter_wl_srcip_x= -sdram_refresh=0x00 -qos_dir_x= -dhcp_domain=wan -usb_webenable_x=1 -wl_auth=0 -sdram_ncdl=0x3e -usb_ftpmaxuser_x= -usb_webdriver_x=0 -hardware_version=WL500gd-01-04-01-50 -usb_ftptimeout_x=120 -wl_frameburst=0 -ezc_enable=1 -qos_minbw_x= -wl_macnum_x=0 -is_modified=0 -wan_ipaddr= -usb_websubject_x=Motion detection alert!!! -dmz_ip= -sr_gateway_x= -misc_natlog_x=0 -wl0_rts=2347 -wan_pppoe_relay_x=0 -wl_ifname= -wan_wins= -wl_wep=disabled -os_version=1.3.2.0 -wl_gmode_protection=auto -wl0_wpa_gtk_rekey=0 -wl_radio_time_x=00002359 -dhcp_staticip_x= -lan_netmask_t= -wl_frag=2346 -wl0_key=1 -dhcp_static_x=0 -macfilter_list_x= -usb_webremote3_x= -wl_maclist= -filter_macmode=deny -filter_lw_default_x=ACCEPT -filter_wl_srcport_x= -console_loglevel=1 -et0phyaddr=254 -time_zone=GMT0 -autofw_inproto_x= -vts_enable_x=1 -fw_enable_x=1 -usb_webattach_x=1 -wan_ifname=eth0 -wl_radioids= -wan_status_t= -vts_num_x=0 -wan_hostname= -wl0_radio=1 -wl_corerev= -sr_ipaddr_x= -dr_static_rip_x=0 -qos_port_x= -wl_channel=0 -wl0_bcn=100 -sr_matric_x= -wl0_hwaddr=00:11:D8:01:CB:3E -wl_afterburner=off -wl_radio=1 -usb_ftpscript_x= -ezc_version=1 -wl0_gmode_protection=auto -usb_webimage_x=1 -wl_radio_date_x=1111111 -wl0_maclist= -autofw_outproto_x= -ddns_passwd_x= -wl_rts=2347 -sdram_init=0x2008 -macfilter_enable_x=disabled -wl_ap_isolate=0 -wan_desc= -lan_wins= -lan_hwnames= -dl_ram_addr=a0001000 -url_time_x=00002359 -wan_dnsenable_x=1 -wl0_radius_key= -regulation_domain=0x30DE -wl_radio_power_x=19 -autofw_enable_x=0 -wl0_corerev=5 -wl_key=1 -wl0_channel=0 -ddns_hostname_x= -lan_proto_x=1 -sr_netmask_x= -upnp_enable=1 -fw_log_x=none -wan_pppoe_ac= -dhcp_enable_x=1 -misc_httpport_x=8080 -wan_proto_t= -wl0_auth_mode=open -wl_closed=0 -wan_heartbeat_x= -autofw_port0= -wl0_crypto=0 -dhcp_wins_x= -autofw_desc_x= -boardnum=45 -wan_pppoe_ifname= -dr_staticipaddr_x= -vts_protono_x= -wl_bcn=100 -qos_rulenum_x=0 -url_date_x=1111111 -ddns_server_x= -usb_bannum_x=0 -wl_antdiv=-1 diff --git a/openwrt/docs/hardware/asus/wl-500gd/pci.txt b/openwrt/docs/hardware/asus/wl-500gd/pci.txt deleted file mode 100644 index 2cca7f8809..0000000000 --- a/openwrt/docs/hardware/asus/wl-500gd/pci.txt +++ /dev/null @@ -1,64 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 1000: PCI device 14e4:4718 (rev 1). - IRQ 5. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4715 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0604: PCI device 14e4:0804 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. - Bus 1, device 0, function 0: - Class 0600: PCI device 14e4:5365 (rev 0). - IRQ 2. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff]. - Prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Bus 1, device 2, function 0: - Class 0c03: PCI device 1106:3038 (rev 97). - IRQ 2. - Master Capable. Latency=22. - I/O at 0x100 [0x11f]. - Bus 1, device 2, function 1: - Class 0c03: PCI device 1106:3038 (rev 97). - IRQ 2. - Master Capable. Latency=22. - I/O at 0x120 [0x13f]. - Bus 1, device 2, function 2: - Class 0c03: PCI device 1106:3104 (rev 99). - IRQ 2. - Master Capable. Latency=22. - Non-prefetchable 32 bit memory at 0x40002000 [0x400020ff]. - Bus 1, device 3, function 0: - Class 0280: PCI device 14e4:4320 (rev 3). - IRQ 2. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x40004000 [0x40005fff]. - diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt deleted file mode 100644 index 335b012b92..0000000000 --- a/openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt +++ /dev/null @@ -1,12 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.47 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available - diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt deleted file mode 100644 index 4fc73849c1..0000000000 --- a/openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt +++ /dev/null @@ -1,89 +0,0 @@ -PU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Sun Mar 27 17:16:55 CEST 2005 -Determined physical RAM map: - memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.47 BogoMIPS -Memory: 14028k/16384k available (1493k kernel code, 2356k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 - Amd/Fujitsu Extended Query Table v1.3 at 0x0040 -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000f0000-0x003f0000 : "rootfs" -0x003f0000-0x00400000 : "nvram" -sflash: found no supported devices -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -cramfs: wrong magic -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/info.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/info.txt deleted file mode 100644 index 60f15239cb..0000000000 --- a/openwrt/docs/hardware/buffalo/wbr2-g54/info.txt +++ /dev/null @@ -1,19 +0,0 @@ -Buffalo WBR2-G54 - -Online Description from Buffalo: -http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wbr2-g54 - -CPU: BCM4712 at 200 MHz -RAM: 16 MB -Flash: 4 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 - diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt deleted file mode 100644 index df73509fae..0000000000 --- a/openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt +++ /dev/null @@ -1,100 +0,0 @@ -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=off -boardrev=0x10 -il0macaddr=00:0D:0B:1A:93:8D -et0macaddr=00:0D:0B:1A:93:8C -boot_wait=on -watchdog=1000 -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -pmon_ver=CFE 3.51.21.10 -wl0_ifname=eth1 -gpio2=adm_eecs -gpio3=adm_eesk -gpio4=adm_eedi -gpio5=adm_rc -vlan0ports=1 2 3 4 5* -wl0_mode=ap -wl0_ap_isolate=0 -os_flash_addr=bfc40000 -wl0_gmode=6 -sromrev=2 -boardtype=0x0101 -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=000D0B1A938D -wl0_key1= -wl0id=0x4320 -wl0_key2= -wl0_key3= -wl0_key4= -pmon_date=Feb 20 2004 16:36:31 -ag0=255 -buffalo_id=29bb0332 -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=0 -wl0_macmode=disabled -wl0gpio0=2 -wl0_radioids=BCM2050 -wl0gpio1=0 -wl0_phytype=g -wl0gpio2=0 -wl0_lazywds=1 -wl0gpio3=0 -wl0gpio4=0 -wl0gpio5=0 -boardflags2=0 -wl0_afterburner=auto -wl0_antdiv=-1 -wl0_wpa_psk= -wl0_unit=0 -wl_country_code=AU -memc_config=0x00048540 -pa0itssit=62 -wl0_wds= -cctl=0 -wl0_radius_port=1812 -wl0_auth=0 -wl0_radius_ipaddr= -pa0maxpwr=60 -clkfreq=200 -lan_ipaddr=192.168.11.1 -vlan1hwname=et0 -aa0=3 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -sdram_config=0x0032 -wl0_country= -vlan1ports=0 5 -scratch=a0180000 -ccode=0 -wl0_rateset=default -boardflags=0x0188 -sdram_refresh=0x0000 -sdram_ncdl=0x23 -wl0_rts=2347 -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:0D:0B:1A:93:8D -wl0_gmode_protection=auto -pa0b0=0x1136 -wl0_maclist= -pa0b1=0xfb93 -pa0b2=0xfea5 -sdram_init=0x0000 -vlan0hwname=et0 -dl_ram_addr=a0001000 -wl0_radius_key= -wl0_corerev=7 -wl0_channel=11 -wl0_auth_mode=open -wl0_crypto=tkip -boardnum=00 - diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt deleted file mode 100644 index 5bf36abbbc..0000000000 --- a/openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt +++ /dev/null @@ -1,38 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. - diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt deleted file mode 100644 index 1e91441281..0000000000 --- a/openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt +++ /dev/null @@ -1,11 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.47 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt deleted file mode 100644 index a0c93c24b8..0000000000 --- a/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt +++ /dev/null @@ -1,85 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 -Determined physical RAM map: - memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.47 BogoMIPS -Memory: 14096k/16384k available (1463k kernel code, 2288k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 - Amd/Fujitsu Extended Query Table v1.0 at 0x0040 -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000f0000-0x003f0000 : "rootfs" -0x003f0000-0x00400000 : "nvram" -sflash: found no supported devices -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000101 -using v2 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -5325E VLAN programming for BCM5325E-MDIO I/F switch -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -br0: port 1(vlan0) entering learning state -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/info.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/info.txt deleted file mode 100644 index b979cdd8d9..0000000000 --- a/openwrt/docs/hardware/buffalo/wla2-g54l/info.txt +++ /dev/null @@ -1,18 +0,0 @@ -Buffalo WLA2-G54L - -Online Description from Buffalo: -http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wla2-g54l - -CPU: BCM4712 at 200 MHz -RAM: 16 MB -Flash: 4 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -no JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt deleted file mode 100644 index 8545f1a001..0000000000 --- a/openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt +++ /dev/null @@ -1,455 +0,0 @@ -ni_netmask=255.255.255.0 -wl_radius_port=1812 -pppoe_demand_select_1=1 -pppoe_demand_select_2=1 -pppoe_demand_select_3=1 -os_ram_addr=80001000 -dhcp_except= -pppoe_demand_select_4=1 -wl0_net_mode=mixed -log_send_forward=0 -wl0_frameburst=on -log_send_enable=0 -il0macaddr=00:0D:0B:41:8A:C3 -boardrev=0x10 -filter_udp= -ntp_interval=24 -forward_ipmasq_time=5 -hostname= -et0macaddr=00:0D:0B:41:8A:C2 -pppoe_demand_1=0 -wl_gmode_protection_cts=1 -pppoe_demand_2=0 -wl_pwrout_per=100 -wep_ascii_select1=1 -log_dhcp_cli=1 -pppoe_demand_3=0 -d11b_rateset=default -d11a_channel=64 -d11g_mode=5 -wep_ascii_select2=1 -pppoe_demand_4=0 -wl0_wep_buf= -watchdog=1000 -boot_wait=on -wep_ascii_select3=1 -wep_ascii_select4=1 -wl0_macmode1=disabled -ini_ipaddr=192.168.11.100 -wl0_infra=1 -et0mdcport=0 -wl0_country_code=AU -d11b_bcn=100 -pppoe_keepalive=1 -log_send_config=1 -pppoe_label_1= -pppoe_label_2= -pmon_ver=CFE 3.51.21.10 -pppoe_label_3= -d11g_protection=0 -restore_defaults=0 -attack_spoofing=0 -pppoe_label_4= -wan_lease=864000 -d11b_frag=2346 -d11g_dtim=1 -filter_melco= -http_wanport= -wl_radius_ipaddr= -pppoe_label= -pppoe_demand_select=1 -wan_hwaddr_select_def=1 -pppoe_mtu_1=1454 -wl0_ifname=eth1 -pppoe_mtu_2=1454 -timer_interval=3600 -pppoe_mtu_3=1454 -gpio2=adm_eecs -filter_lansetup=0 -pppoe_mtu_4=1454 -gpio3=adm_eesk -gpio4=adm_eedi -dhcp_manual= -ap_name=AP000D0B418AC2 -pppoe_mtu=1454 -vlan0ports=1 2 3 4 5* -gpio5=adm_rc -log_disp_name=NEWEST -route_pppoe= -filter_tcp= -pppoe_keepalive_1=1 -pppoe_keepalive_2=1 -log_attack=0 -pppoe_keepalive_3=1 -wl0_mode=ap -dhcp_start=192.168.11.2 -pppoe_keepalive_4=1 -wl0_ap_isolate=0 -httpc_auth_ipaddr_tmp= -dhcp_end=192.168.11.17 -log_send_dhcp_serv=0 -os_flash_addr=bfc40000 -domain= -log_send_dhcp_cli=1 -sromrev=2 -ap_wl_version= -wl0_gmode=5 -httpc_login_off_time=5 -pppoe_username_1= -boardtype=0x0101 -pppoe_username_2= -attack_cm_addr= -pppoe_username_3= -wl_gmode=5 -pppoe_username_4= -stats_server= -log_pppoe=0 -static_route= -d11g_rate=0 -log_ntpcli=1 -lan_netmask=255.255.255.0 -log_send_pppoe=0 -attack_select=0 -wl0_wep_last= -http_username=root -wl0_ssid=000D0B418AC2 -wl0_dtim=1 -pmon_upgrade=0 -http_lanport=80 -wl_plcphdr=long -wl_macmode=disabled -lcp_echo_failure_1=6 -wan_hwname= -log_disp_page=0 -lcp_echo_failure_2=6 -wl0id=0x4320 -wan_netmask=255.255.255.0 -d11a_dtim=1 -lcp_echo_failure_3=6 -wl_phytype=g -wl0_key1= -wl_lazywds=0 -lcp_echo_failure_4=6 -wl0_key2= -wl0_key3= -wl0_key4= -wl_auth_mode=disabled -log_etc=1 -pppoe_mru_1=1454 -pppoe_mru_2=1454 -dhcp_domain_select=NONE -attack_mail_pop_addr= -pppoe_mru_3=1454 -d11g_rts=2347 -pppoe_mru_4=1454 -pmon_date=Mar 12 2004 14:29:18 -ag0=255 -http_passwd= -wl_wpa_psk= -d11b_channel=11 -melco_web_carrier_select= -wl_wds_list= -log_level_notice=1 -log_power=1 -lan_stp=0 -forward_melco= -dhcp_dns_ip1= -log_wired=1 -wan_ipaddr_bak= -buffalo_id=29129 -wl_mode=ap -dhcp_dns_ip2= -log_send_power=1 -log_send_wired=1 -melco_web_lan=0 -wl0_closed=0 -wl0_rate=0 -wl0_plcphdr=long -wl0gpio0=2 -wl_wpa_gtk_rekey=0 -d11g_rateset=default -wl0_macmode=disabled -wl0gpio1=0 -wl0_radioids=BCM2050 -wl0gpio2=0 -wl0_phytype=g -wl0gpio3=0 -wl0_lazywds=0 -wl0gpio4=0 -dhcp_gw_select=AP -wl0gpio5=0 -pppoe_disable_1=0 -boardflags2=0 -pppoe_disable_2=0 -log_level_err=1 -pppoe_disable_3=0 -wl0_afterburner=auto -d11a_rate=0 -log_filter=1 -pppoe_disable_4=0 -lan_hwaddr= -wl0_antdiv=-1 -asts_data= -wl_ssid=000D0B418AC2 -wl_dtim=1 -wl0_wpa_psk= -d11g_bcn=100 -time_zone_melco=GMT+6 -log_send_level_notice=1 -pppoe_hostuniq_1= -httpc_auth_ipaddr= -pppoe_hostuniq_2= -wl0_mac_list= -dhcp_wins= -pppoe_hostuniq_3= -os_server= -ap_fw_code=00 -pppoe_hostuniq_4= -wan_proto=dhcp -wl_key1= -wl_key2= -wl_key3= -wl0_unit=0 -wl_key4= -wl_country_code=AU -memc_config=0x0004854a -wl_hwaddr=00:0D:0B:41:8A:C3 -pppoe_session_default=-1 -pppoe_manual=0 -dhcp_wins_select=NONE -pa0itssit=62 -flash_recover=1 -wl_txpwr=22 -wl_mac_melco= -ntp_enable=0 -time_backup=2003.01.01-00:00:00 -melco_web_wan=0 -attack_threshold=5 -pppoe_passwd_confirm= -dhcp_range=16 -log_send_etc=1 -d11g_frag=2346 -wl0_wds= -wl_rate=0 -pppoe_incom_1=0 -cctl=0 -log_level=1 -d11a_rts=2347 -filter_ident=0 -pppoe_incom_2=0 -ntp_server= -pppoe_incom_3=0 -wan_hwaddr= -pppoe_incom_4=0 -lan_ifnames=eth0 eth2 -wl_limit_select=0 -pppoe_ifname= -filter_wdssetup=0 -pppoe_auth_1=AUTO -wl0_auth=0 -wl0_mac_deny= -wl0_radius_port=1812 -pppoe_auth_2=AUTO -pppoe_auth_3=AUTO -wl0_radius_ipaddr= -pppoe_service= -pppoe_auth_4=AUTO -wl_country=Worldwide -pa0maxpwr=60 -attack_synfd_iplimit=5 -lcp_echo_interval=60 -wl_rateset=default -log_send_attack=0 -pppoe_retransmit_1=4 -http_passwd_confirm= -pppoe_retransmit_2=4 -pppoe_retransmit_3=4 -dhcp_start_melco=192.168.11.2 -pppoe_retransmit_4=4 -lan_ipaddr=192.168.11.100 -clkfreq=200 -os_name=linux -lan_proto=static -wl_radius_key= -aa0=3 -vlan1hwname=et0 -dns_manual0= -wl_unit=0 -filter_wanping=1 -dns_manual1= -wan_connecttime= -wl0_phytypes=g -d11a_bcn=100 -d11g_channel=11 -wl0_wep=off -wl0_frag=2346 -wins= -pppoe_incom=0 -pppoe_passwd= -pppoe_registered_1=0 -sdram_config=0x0032 -filter_nbt=0 -log_send_ntpcli=1 -melco_web_select= -pppoe_registered_2=0 -pppoe_registered_3=0 -wl0_country=Worldwide -vlan1ports=0 5 -dmz_ipaddr= -pppoe_registered_4=0 -wl_wds= -scratch=a0180000 -dns= -d11a_frag=2346 -ccode=0 -filter_ip= -melco_web_setuzoku=0 -wl0_rateset=default -attack_mail_to= -pppoe_idletime_1=20 -log_firewall=1 -pppoe_idletime_2=20 -lcp_echo_failure=6 -wl0_wep_bit=64 -pppoe_idletime=20 -pppoe_idletime_3=20 -log_server= -asts_enable=1 -pppoe_idletime_4=20 -lan_ifname=br0 -attack_mail_pop_pass= -boardflags=0x0188 -rip_wan_recv=0 -sdram_refresh=0x0000 -log_config=1 -wl0_afterburner_override=-1 -dhcp_domain= -wl_auth=0 -sdram_ncdl=0x20422 -filter_mac= -wl_frameburst=on -attack_cm_select=0 -filter_wlansetup=0 -log_forward=0 -wan_ipaddr=1.1.1.1 -forward_enable=1 -asts_sta_data= -wl0_passphrase= -gateway_manual= -lcp_echo_interval_1=60 -attack_mail_select=0 -attack_synfd_limit=0 -lcp_echo_interval_2=60 -wl0_rts=2347 -wl_ssid_mac=1 -pppoe_passwd_1= -lcp_echo_interval_3=60 -pppoe_passwd_2= -lcp_echo_interval_4=60 -wl_ifname=eth2 -wl_wep=off -pppoe_passwd_3= -d11b_dtim=1 -d11b_plcphdr=long -dhcp_gw_ip= -pppoe_passwd_4= -os_version=3.60.9.0 -wan_speed=AUTO -pppoe_username= -wl_gmode_protection=auto -gateway=0.0.0.0 -asts_deny_mac= -wl0_wpa_gtk_rekey=0 -log_dhcp_serv=0 -wl_frag=2346 -httpc_ipaddr= -wl0_key=1 -log_send_filter=1 -wl0_active_mac= -wl_maclist= -et0phyaddr=30 -console_loglevel=1 -time_zone=PST8PDT -d11a_rateset=default -d11g_shortslot_restrict=0 -wl_ssid_input= -wan_mdi=0 -pppoe_ac_name= -pppoe_passwd_confirm_1= -log_send_level_err=1 -log_send_firewall=1 -pppoe_passwd_confirm_2= -wan_ifname= -attack_mail_from= -pppoe_disable=0 -pppoe_passwd_confirm_3= -d11a_hwaddr= -rip_lan_recv=3 -ap_version=BUFFALO Ver.1.00 -pppoe_passwd_confirm_4= -wl_mac= -pppoe_service_1= -wl0_radio=1 -pppoe_service_2= -wl_channel=11 -d11g_hwaddr= -pppoe_service_3= -pppoe_service_4= -wl0_bcn=100 -dhcp_dns_select=AP -wl_wds_enable=0 -forward_udp= -wl_radio=1 -wl0_hwaddr=00:0D:0B:41:8A:C3 -d11b_rate=0 -forward_group= -rip_wan_send=0 -ap_hw_code=00 -wl0_wep_gen= -pa0b0=0x1136 -dhcp_lease_time=48 -log_wlcli=1 -wl0_gmode_protection=auto -pa0b1=0xfb93 -attack_dos_rules=0 -wl0_maclist= -pa0b2=0xfea5 -sdram_init=0x000a -wl_rts=2347 -log_send_wlcli=1 -pppoe_hostuniq= -ping_ipaddr=192.168.11.1 -vlan0hwname=et0 -dl_ram_addr=a0001000 -lan_hwnames=et0 wl0 -attack_mail_pop_user= -pppoe_registered=0 -pppoe_retransmit=4 -pppoe_demand=0 -pmon_upgrade_mode=0 -pppoe_ac_name_1= -wl0_radius_key= -pppoe_ac_name_2= -pppoe_ac_name_3= -wl0_corerev=7 -wl_key=1 -lan_speed=AUTO -pppoe_ac_name_4= -pppoe_mru=1454 -wl0_channel=11 -phytst=0 -pppoe_auth=AUTO -upnp_enable=1 -wl_ps=0 -product_name=Product_name -wl_closed=0 -wl0_auth_mode=disabled -wl0_crypto=tkip -boardnum=00 -attack_mail_smtp_addr= -boardtype_2=0 -wl_bcn=100 -d11b_rts=2347 -forward_tcp= -d11b_hwaddr= -rip_lan_send=0 diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt deleted file mode 100644 index 2be172663f..0000000000 --- a/openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt deleted file mode 100644 index b3cfcfb0b4..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt +++ /dev/null @@ -1,16 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM4710 V0.0 -BogoMIPS : 82.94 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available -dcache hits : 2866936757 -dcache misses : 57830034 -icache hits : 1724839356 -icache misses : 431170605 -instructions : 2156850242 diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt deleted file mode 100644 index 58e5ce54cc..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt +++ /dev/null @@ -1,96 +0,0 @@ -CPU revision is: 00024000 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005 -Determined physical RAM map: - memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4710 rev 0 at 125 MHz -Using 62.400 MHz high precision timer. -!unable to setup serial console! -Calibrating delay loop... 82.94 BogoMIPS -Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Fixing up bus 0 -PCI: Fixing up bridge -PCI: Setting latency timer of device 01:00.0 to 64 -PCI: Fixing up bus 1 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 - Amd/Fujitsu Extended Query Table v1.1 at 0x0040 -Physically mapped flash: Swapping erase regions for broken CFI table. -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1fc00000 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000edd94-0x001fd000 : "rootfs" -mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only -0x003f0000-0x00400000 : "nvram" -0x00200000-0x003f0000 : "OpenWrt" -sflash: chipcommon not found -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Warning: unable to open an initial console. -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 0000041a -using v1 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:08.0 to 64 -5325E phy=FFFFFFFF -eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 01:08.0 to 64 -PCI: Enabling device 01:08.0 (0004 -> 0006) -eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan2: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -device eth2 entered promiscuous mode -br0: port 3(eth2) entering learning state -br0: port 2(eth1) entering learning state -br0: port 1(vlan2) entering learning state -br0: port 3(eth2) entering forwarding state -br0: topology change detected, propagating -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan2) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt deleted file mode 100644 index a47a11b706..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt +++ /dev/null @@ -1,54 +0,0 @@ -br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:6022 errors:0 dropped:0 overruns:0 frame:0 - TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB) - -eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:6204 errors:0 dropped:0 overruns:0 frame:0 - TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB) - Interrupt:3 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB) - Interrupt:4 Base address:0x8000 - -eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:2202 - TX packets:93 errors:36 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB) - Interrupt:6 Base address:0x2000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:181 errors:0 dropped:0 overruns:0 frame:0 - TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB) - -vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:6023 errors:0 dropped:0 overruns:0 frame:0 - TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB) - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt deleted file mode 100644 index 2bd458d160..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt +++ /dev/null @@ -1,23 +0,0 @@ -Linksys WRT54G v1.1 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 - -CPU: BCM4710 at 125 MHz -RAM: 16 MB -Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit) -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith -serial port possible (but not used) -JTAG interface available (but not used) - -List of files: -nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 -lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) - --- -Nico diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt deleted file mode 100644 index d58a02b25f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt +++ /dev/null @@ -1,92 +0,0 @@ -0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803 - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, non-prefetchable) [disabled] [size=128M] - Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M] - Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000] - Expansion ROM at [disabled] [size=2K] - -0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0 - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller - Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic]) - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI]) - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode]) - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ SERR+ [disabled] [size=2K] - BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- - -0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core - Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller - Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] - -0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01) - Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) [size=128M] - -0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) - Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000101 -using v2 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -5325E VLAN programming for BCM5325E-MDIO I/F switch -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: Setting MAC address to 00 0a 48 06 82 50. -vlan1: add 01:00:5e:00:00:01 mcast address to master interface -device br0 entered promiscuous mode -device br0 left promiscuous mode -device br0 entered promiscuous mode -device br0 left promiscuous mode - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt deleted file mode 100644 index 97922e093a..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt +++ /dev/null @@ -1,46 +0,0 @@ -br0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:370 errors:0 dropped:0 overruns:0 frame:0 - TX packets:232 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:22641 (22.1 KiB) TX bytes:37549 (36.6 KiB) - -eth0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:110 errors:0 dropped:0 overruns:0 frame:0 - TX packets:548 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:23978 (23.4 KiB) TX bytes:69928 (68.2 KiB) - Interrupt:5 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:90 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:479 errors:0 dropped:0 overruns:0 frame:2 - TX packets:407 errors:4 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:37211 (36.3 KiB) TX bytes:73096 (71.3 KiB) - Interrupt:4 Base address:0x1000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:110 errors:0 dropped:0 overruns:0 frame:0 - TX packets:276 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:21998 (21.4 KiB) TX bytes:29605 (28.9 KiB) - -vlan1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:272 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:40323 (39.3 KiB) - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt deleted file mode 100644 index 8278e098ef..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt +++ /dev/null @@ -1,19 +0,0 @@ -Linksys WRT54G v2.0 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 - -CPU: BCM4712 at 200 MHz -RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731) -Flash: 4 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -ifconfig.txt: output of ifconfig (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg (XH model, 2.4.29) diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt deleted file mode 100644 index 6c37ad6550..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt +++ /dev/null @@ -1,113 +0,0 @@ -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=on -il0macaddr=00:0f:66:d3:11:90 -boardrev=0x10 -et0macaddr=00:0F:66:D3:11:8E -wl0_wep_buf= -watchdog=5000 -boot_wait=on -wl0_macmode1=disabled -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -wl0_ap_ssid= -pmon_ver=CFE 3.51.21.0 -wl0_ifname=eth1 -gpio2=adm_eecs -gpio3=adm_eesk -ifnames=vlan0 vlan1 -vlan0ports=1 2 3 4 5* -gpio5=adm_eedi -gpio6=adm_rc -wl0_mrate=0 -wl0_mode=ap -wl0_ap_isolate=0 -os_flash_addr=bfc40000 -wl0_gmode=1 -sromrev=2 -boardtype=0x0101 -wl0_wep_last= -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=b0rken -wl0_key1= -wl0id=0x4320 -wl0_key2= -wl0_key3= -wl0_key4= -wl_auth_mode=open -ag0=255 -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=1 -wl0_macmode=disabled -wl0_radioids=BCM2050 -wl0_phytype=g -wl0gpio2=0 -wl0_lazywds=1 -wl0gpio3=0 -boardflags2=0 -wl0_afterburner=auto -lan_hwaddr=00:0F:66:D3:11:8E -wl0_antdiv=-1 -wl0_mac_list= -wl0_unit=0 -wl_country_code=AU -pa0itssit=62 -wl0_wds= -cctl=0 -lan_ifnames=vlan0 vlan1 eth1 -wl0_radius_port=1812 -wl0_mac_deny= -wl0_auth=0 -wl0_radius_ipaddr= -pa0maxpwr=0x48 -wan_ifnames=vlan1 -wl_crypto=tkip -lan_proto=static -lan_ipaddr=192.168.1.1 -clkfreq=200 -aa0=3 -vlan1hwname=et0 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -sdram_config=0x0032 -wl0_country=Worldwide -vlan1ports=0 5 -scratch=a0180000 -ccode=0 -wl0_rateset=default -wl0_wep_bit=64 -lan_ifname=br0 -boardflags=0x0188 -wl0_afterburner_override=-1 -sdram_refresh=0x0000 -sdram_ncdl=0x25 -wl0_passphrase= -wl0_rts=2347 -wl_wep=disabled -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -wl0_active_mac= -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:0F:66:D3:11:90 -wl0_wep_gen= -wl0_gmode_protection=auto -pa0b0=0x170c -wl0_maclist= -pa0b1=0xfa24 -pa0b2=0xfe70 -sdram_init=0x0000 -vlan0hwname=et0 -dl_ram_addr=a0001000 -wl0_radius_key= -wl0_corerev=7 -wl0_channel=6 -wl0_auth_mode=open -boot_ver=v2.3 -boardnum=42 -wl0_ap_ip= diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt deleted file mode 100644 index cd7aafc136..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/cpuinfo.txt deleted file mode 100644 index dd54f9c676..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/cpuinfo.txt +++ /dev/null @@ -1,16 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.06 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available -dcache hits : 4244635257 -dcache misses : 1073741821 -icache hits : 4181718158 -icache misses : 4080970363 -instructions : 0 diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt deleted file mode 100644 index ee7151d222..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt +++ /dev/null @@ -1,117 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 -Determined physical RAM map: -memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.06 BogoMIPS -Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x2000,blocks=8 -1: offset=0x10000,size=0x10000,blocks=63 -Using word write method -Flash device: 0x400000 at 0x1c000000 -Physically mapped flash: squashfs filesystem found at block 946 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000ec990-0x001ceb48 : "rootfs" -mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only -0x003f0000-0x00400000 : "nvram" -0x001d0000-0x003f0000 : "OpenWrt" -sflash: found no supported devices -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000708 -using v1 hardware -led -> 00 -led -> 01 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=0 -5325E VLAN programming for BCM5325E-MDIO I/F switch -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: Setting MAC address to 00 12 17 cc cd 25. -vlan1: add 01:00:5e:00:00:01 mcast address to master interface -led -> 00 - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/ifconfig.txt deleted file mode 100644 index 48cbbe5429..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/ifconfig.txt +++ /dev/null @@ -1,46 +0,0 @@ -br0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:125 errors:0 dropped:0 overruns:0 frame:0 - TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:5155 (5.0 KiB) TX bytes:22844 (22.3 KiB) - -eth0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:125 errors:0 dropped:0 overruns:0 frame:0 - TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:8554 (8.3 KiB) TX bytes:23232 (22.6 KiB) - Interrupt:5 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:12:17:CC:CD:26 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:3083 - TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 (0.0 B) TX bytes:50 (50.0 B) - Interrupt:4 Base address:0x1000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:125 errors:0 dropped:0 overruns:0 frame:0 - TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:6304 (6.1 KiB) TX bytes:23232 (22.6 KiB) - -vlan1 Link encap:Ethernet HWaddr 00:12:17:CC:CD:25 - inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/info.txt deleted file mode 100644 index e9b2ccdf7f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/info.txt +++ /dev/null @@ -1,18 +0,0 @@ -Linksys WRT54G v2.2 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 - -CPU: BCM4712 at 200 MHz -RAM: 16 MB -Flash: 4 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/nvram.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/nvram.txt deleted file mode 100644 index 02c765ea1d..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/nvram.txt +++ /dev/null @@ -1,477 +0,0 @@ - -Intel_firmware_version=v1.41.8 -QoS=0 -aa0=3 -action_service=start_ping -action_service_arg1= -ag0=255 -aol_block_traffic1=0 -aol_block_traffic2=0 -aol_block_traffic=0 -autofw_port0= -bcm4712_firmware_version=v1.50.0 -block_activex=0 -block_cookie=0 -block_java=0 -block_loopback=0 -block_proxy=0 -block_wan=1 -boardflags2=0 -boardflags=0x0118 -boardnum=42 -boardrev=0x10 -boardtype=0x0708 -boot_ver=v3.4 -boot_wait=on -bootnv_ver=2 -ccode=0 -cctl=0 -clkfreq=200 -console_loglevel=1 -ct_modules= -d11g_bcn=100 -d11g_channel=11 -d11g_dtim=1 -d11g_frag=2346 -d11g_mode=1 -d11g_rate=0 -d11g_rateset=default -d11g_rts=2347 -daylight_time=1 -ddns_cache= -ddns_change= -ddns_enable=0 -ddns_enable_buf= -ddns_hostname= -ddns_hostname_2= -ddns_hostname_buf= -ddns_interval=60 -ddns_passwd= -ddns_passwd_2= -ddns_passwd_buf= -ddns_status= -ddns_username= -ddns_username_2= -ddns_username_buf= -def_hwaddr=00:00:00:00:00:00 -dhcp_domain=wan -dhcp_lease=0 -dhcp_num=50 -dhcp_start=100 -dhcp_wins=wan -dl_ram_addr=a0001000 -dmz_enable=0 -dmz_ipaddr=0 -dr_lan_rx=0 -dr_lan_tx=0 -dr_setting=0 -dr_wan_rx=0 -dr_wan_tx=0 -eou_configured=1 -eou_device_id=CXLVVGWQ -eou_expired_hour=72 -eou_key_index=1 -eou_private_key=a752d99baa01b0889aee1c9bc9e49fd05a046e7183f9f21c21caa2bf832f341a98c2d2b6d299dd621cba5a02c7da6f36d5881cb29a0306483e63b74e3321b39c1b6e88d66ec200adbbc04412ae6a744bcf6530fdcfea8106e340c8012cadf32ddb37ff714c9588b1d0c141381433f1f0f96cabf9336002a87d39b24181193bf1 -eou_public_key=b1c8073564a1cb91249cfe658682e9cd5fa4b5589c39913de3e74ceb7b62275c424effe23fc37b383e85ffa2f458162a42e09e7dc3a336acc249f2c31653ced787dd8aae9eb3335c17569f2c17e677170ec9ad119ba6541065c760e096fd230e5ef4592e1dc2a9efbf564d666df5ac200b0c6dd96e2d33edb773f95cab4650c111 -et0macaddr=00:12:17:CC:CD:24 -et0mdcport=0 -et0phyaddr=30 -ezc_enable=1 -ezc_version=2 -filter=on -filter_client0= -filter_dport_grp10= -filter_dport_grp1= -filter_dport_grp2= -filter_dport_grp3= -filter_dport_grp4= -filter_dport_grp5= -filter_dport_grp6= -filter_dport_grp7= -filter_dport_grp8= -filter_dport_grp9= -filter_id=1 -filter_ip_grp10= -filter_ip_grp1= -filter_ip_grp2= -filter_ip_grp3= -filter_ip_grp4= -filter_ip_grp5= -filter_ip_grp6= -filter_ip_grp7= -filter_ip_grp8= -filter_ip_grp9= -filter_mac_grp10= -filter_mac_grp1= -filter_mac_grp2= -filter_mac_grp3= -filter_mac_grp4= -filter_mac_grp5= -filter_mac_grp6= -filter_mac_grp7= -filter_mac_grp8= -filter_mac_grp9= -filter_maclist= -filter_macmode=deny -filter_port= -filter_port_grp10= -filter_port_grp1= -filter_port_grp2= -filter_port_grp3= -filter_port_grp4= -filter_port_grp5= -filter_port_grp6= -filter_port_grp7= -filter_port_grp8= -filter_port_grp9= -filter_rule10= -filter_rule1= -filter_rule2= -filter_rule3= -filter_rule4= -filter_rule5= -filter_rule6= -filter_rule7= -filter_rule8= -filter_rule9= -filter_services=$NAME:003:DNS$PROT:003:udp$PORT:005:53:53< >$NAME:004:Ping$PROT:004:icmp$PORT:003:0:0< >$NAME:004:HTTP$PROT:003:tcp$PORT:005:80:80< >$NAME:005:HTTPS$PROT:003:tcp$PORT:007:443:443< >$NAME:003:FTP$PROT:003:tcp$PORT:005:21:21< >$NAME:004:POP3$PROT:003:tcp$PORT:007:110:110< >$NAME:004:IMAP$PROT:003:tcp$PORT:007:143:143< >$NAME:004:SMTP$PROT:003:tcp$PORT:005:25:25< >$NAME:004:NNTP$PROT:003:tcp$PORT:007:119:119< >$NAME:006:Telnet$PROT:003:tcp$PORT:005:23:23< >$NAME:004:SNMP$PROT:003:udp$PORT:007:161:161< >$NAME:004:TFTP$PROT:003:udp$PORT:005:69:69< >$NAME:003:IKE$PROT:003:udp$PORT:007:500:500< > -filter_tod10= -filter_tod1= -filter_tod2= -filter_tod3= -filter_tod4= -filter_tod5= -filter_tod6= -filter_tod7= -filter_tod8= -filter_tod9= -filter_tod_buf10= -filter_tod_buf1= -filter_tod_buf2= -filter_tod_buf3= -filter_tod_buf4= -filter_tod_buf5= -filter_tod_buf6= -filter_tod_buf7= -filter_tod_buf8= -filter_tod_buf9= -filter_web_host10= -filter_web_host1= -filter_web_host2= -filter_web_host3= -filter_web_host4= -filter_web_host5= -filter_web_host6= -filter_web_host7= -filter_web_host8= -filter_web_host9= -filter_web_url10= -filter_web_url1= -filter_web_url2= -filter_web_url3= -filter_web_url4= -filter_web_url5= -filter_web_url6= -filter_web_url7= -filter_web_url8= -filter_web_url9= -firmware_version=v3.03.1 -flash_type=Intel 28F320C3 2Mx16 BotB -forward_port= -fw_disable=0 -gpio5=robo_reset -hb_server_domain= -hb_server_ip= -http_client_ip=192.168.1.2 -http_client_mac=00:D0:59:9D:7C:8D -http_enable=1 -http_lanport=80 -http_method=post -http_passwd=admin -http_username= -http_wanport=8080 -https_enable=0 -ident_pass=0 -il0macaddr=00:12:17:cc:cd:26 -ipsec_pass=1 -is_default=0 -is_modified=1 -l2tp_get_ip= -l2tp_pass=1 -l2tp_server_ip= -lan_domain= -lan_hwaddr=00:12:17:CC:CD:24 -lan_hwnames= -lan_ifname=br0 -lan_ifnames=vlan0 eth1 eth2 eth3 -lan_ipaddr=192.168.1.1 -lan_lease=86400 -lan_netmask=255.255.255.0 -lan_proto=static -lan_stp=0 -lan_wins= -log_enable=0 -log_ipaddr=0 -log_level=0 -mac_clone_enable=0 -manual_rate=0 -mtu_enable=0 -multicast_pass=0 -ntp_mode=auto -ntp_server= -os_date=Oct 18 2004 -os_flash_addr=bfc40000 -os_name=linux -os_ram_addr=80001000 -os_server= -os_version=3.61.13.0 -pa0b0=0x15eb -pa0b1=0xfa82 -pa0b2=0xfe66 -pa0itssit=62 -pa0maxpwr=0x4e -ping_ip=;*/n${IFS}show>tmp/ping.log -ping_times=5 -pmon_ver=CFE 3.61.13.0 -port_flow_control_1=1 -port_flow_control_2=1 -port_flow_control_3=1 -port_flow_control_4=1 -port_priority_1=0 -port_priority_2=0 -port_priority_3=0 -port_priority_4=0 -port_rate_limit_1=0 -port_rate_limit_2=0 -port_rate_limit_3=0 -port_rate_limit_4=0 -port_trigger= -ppp_ac= -ppp_demand=1 -ppp_get_ac= -ppp_get_srv= -ppp_idletime=5 -ppp_keepalive=0 -ppp_mru=1500 -ppp_mtu=1500 -ppp_passwd= -ppp_redialperiod=30 -ppp_service= -ppp_static=0 -ppp_static_ip= -ppp_username= -pppoe_ac= -pppoe_demand=1 -pppoe_idletime=5 -pppoe_ifname= -pppoe_keepalive=0 -pppoe_passwd= -pppoe_service= -pppoe_static=0 -pppoe_static_ip= -pppoe_username= -pptp_get_ip= -pptp_pass=1 -pptp_server_ip= -qos_appname1= -qos_appname2= -qos_appname3= -qos_appport1=0 -qos_appport2=0 -qos_appport3=0 -qos_devmac1=00:00:00:00:00:00 -qos_devmac2=00:00:00:00:00:00 -qos_devname1= -qos_devname2= -qos_devpri1=0 -qos_devpri2=0 -rate_mode=1 -remote_management=0 -remote_mgt_https=0 -restore_defaults=0 -router_disable=0 -router_name=WRT54G -scratch=a0180000 -sdram_config=0x0062 -sdram_init=0x000b -sdram_ncdl=0xfd0009 -sdram_refresh=0x0000 -security_mode=disabled -security_mode_last= -sel_qosftp=0 -sel_qoshttp=0 -sel_qospop3=0 -sel_qosport1=0 -sel_qosport2=0 -sel_qosport3=0 -sel_qossmtp=0 -sel_qostelnet=0 -skip_amd_check=0 -skip_intel_check=0 -sromrev=2 -static_route= -static_route_name= -stats_server= -time_zone=-08 1 1 -timer_interval=30 -traceroute_ip= -upnp_enable=1 -upnp_wan_proto= -vlan0hwname=et0 -vlan0ports=1 2 3 4 5* -vlan1hwname=et0 -vlan1ports=0 5 -wan_dns= -wan_domain= -wan_gateway=10.0.0.254 -wan_gateway_buf=0.0.0.0 -wan_get_dns= -wan_get_domain= -wan_hostname= -wan_hwaddr=00:12:17:CC:CD:25 -wan_hwname= -wan_iface=vlan1 -wan_ifname=vlan1 -wan_ifnames=vlan1 -wan_ipaddr=10.0.0.1 -wan_ipaddr_buf=0.0.0.0 -wan_lease=0 -wan_mtu=1500 -wan_netmask=255.255.255.0 -wan_primary=1 -wan_proto=static -wan_run_mtu=1500 -wan_unit=0 -wan_wins= -watchdog=5000 -web_wl_filter=0 -wk_mode=gateway -wl0_active_mac= -wl0_afterburner=off -wl0_antdiv=-1 -wl0_ap_ip= -wl0_ap_isolate=0 -wl0_ap_ssid= -wl0_auth=0 -wl0_auth_mode=open -wl0_bcn=100 -wl0_channel=11 -wl0_closed=0 -wl0_corerev=7 -wl0_country=Worldwide -wl0_country_code=AU -wl0_crypto=tkip -wl0_dtim=1 -wl0_frag=2346 -wl0_frameburst=off -wl0_gmode=1 -wl0_gmode_protection=off -wl0_hwaddr=00:12:17:CC:CD:26 -wl0_ifname=eth1 -wl0_infra=1 -wl0_key1= -wl0_key2= -wl0_key3= -wl0_key4= -wl0_key=1 -wl0_lazywds=1 -wl0_mac_deny= -wl0_mac_list= -wl0_maclist= -wl0_macmode1=disabled -wl0_macmode=disabled -wl0_mode=ap -wl0_mrate=0 -wl0_net_mode=mixed -wl0_passphrase= -wl0_phytype=g -wl0_phytypes=g -wl0_plcphdr=long -wl0_radio=1 -wl0_radioids=BCM2050 -wl0_radius_ipaddr= -wl0_radius_key= -wl0_radius_port=1812 -wl0_rate=0 -wl0_rateset=default -wl0_rts=2347 -wl0_ssid=linksys -wl0_unit=0 -wl0_wds= -wl0_wep=disabled -wl0_wep_bit=64 -wl0_wep_buf= -wl0_wep_gen= -wl0_wep_last= -wl0_wpa_gtk_rekey=3600 -wl0_wpa_psk= -wl0gpio2=0 -wl0gpio3=0 -wl0id=0x4320 -wl_active_add_mac=0 -wl_active_mac= -wl_afterburner=off -wl_antdiv=-1 -wl_ap_ip= -wl_ap_isolate=0 -wl_ap_ssid= -wl_atten_bb=3 -wl_atten_ctl=48 -wl_atten_radio=4 -wl_auth=0 -wl_auth_mode=open -wl_bcn=100 -wl_cck= 3 -wl_channel=11 -wl_closed=0 -wl_corerev= -wl_country=Worldwide -wl_country_code=AU -wl_crypto=tkip -wl_delay=1 -wl_dtim=1 -wl_frag=2346 -wl_frameburst=off -wl_gmode=1 -wl_gmode_protection=off -wl_hwaddr= -wl_ifname= -wl_infra=1 -wl_key1= -wl_key2= -wl_key3= -wl_key4= -wl_key=1 -wl_lazywds=1 -wl_mac_deny= -wl_mac_list= -wl_maclist= -wl_macmode1=disabled -wl_macmode=disabled -wl_mode=ap -wl_mrate=0 -wl_net_mode=mixed -wl_ofdm= 0 -wl_passphrase= -wl_phytype=g -wl_phytypes= -wl_plcphdr=long -wl_radio=1 -wl_radioids= -wl_radius_ipaddr= -wl_radius_key= -wl_radius_port=1812 -wl_rate=0 -wl_rateset=default -wl_rts=2347 -wl_ssid=linksys -wl_tssi_result= 3 -wl_unit=0 -wl_wds= -wl_wep=disabled -wl_wep_bit=64 -wl_wep_buf= -wl_wep_gen= -wl_wep_last= -wl_wpa_gtk_rekey=3600 -wl_wpa_psk= diff --git a/openwrt/docs/hardware/linksys/wrt54g_v22/pci.txt b/openwrt/docs/hardware/linksys/wrt54g_v22/pci.txt deleted file mode 100644 index 2be172663f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v22/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt deleted file mode 100644 index 404c148b69..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt +++ /dev/null @@ -1,16 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.06 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available -dcache hits : 4278190076 -dcache misses : 1840115641 -icache hits : 4294967071 -icache misses : 4294967287 -instructions : 0 diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt deleted file mode 100644 index de5f8d8240..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt +++ /dev/null @@ -1,88 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Mon Feb 21 17:40:12 CET 2005 -Determined physical RAM map: -memory: 02000000 @ 00000000 (usable) -On node 0 totalpages: 8192 -zone(0): 8192 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.06 BogoMIPS -Memory: 30260k/32768k available (1477k kernel code, 2508k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) -Inode cache hash table entries: 2048 (order: 2, 16384 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 8192 (order: 3, 32768 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x20000,blocks=64 -Using buffer write method -Flash device: 0x800000 at 0x1c000000 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x007e0000 : "linux" -0x00100000-0x002a0000 : "rootfs" -0x007e0000-0x00800000 : "nvram" -0x002a0000-0x007e0000 : "OpenWrt" -sflash: found no supported devices -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 2048 bind 4096) -ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000101 -using v2 hardware -led -> 00 -led -> 01 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt deleted file mode 100644 index 8e205ef5c6..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt +++ /dev/null @@ -1,45 +0,0 @@ -br0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -eth0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 (0.0 B) TX bytes:39204 (38.2 KiB) - Interrupt:5 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:0F:66:C8:74:46 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:7245 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - Interrupt:4 Base address:0x1000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan1 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:39204 (38.2 KiB) diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/info.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/info.txt deleted file mode 100644 index 23c2271ef7..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/info.txt +++ /dev/null @@ -1,18 +0,0 @@ -Linksys WRT54GS v1.0 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 - -CPU: BCM4712 at 200 MHz -RAM: 32 MB -Flash: 8 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after nvram erase in CFE -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/nvram.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/nvram.txt deleted file mode 100644 index bf70a4bf02..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/nvram.txt +++ /dev/null @@ -1,105 +0,0 @@ -aa0=3 -ag0=255 -boardflags2=0 -boardflags=0x0388 -boardnum=42 -boardrev=0x10 -boardtype=0x0101 -boot_ver=v3.2 -boot_wait=yes -ccode=0 -cctl=0 -clkfreq=200 -dl_ram_addr=a0001000 -et0macaddr=00:0F:66:C8:74:44 -et0mdcport=0 -et0phyaddr=30 -gpio2=adm_eecs -gpio3=adm_eesk -gpio5=adm_eedi -gpio6=adm_rc -il0macaddr=00:0f:66:c8:74:46 -lan_ipaddr=192.168.1.1 -lan_netmask=255.255.255.0 -os_flash_addr=bfc40000 -os_ram_addr=80001000 -pa0b0=0x170c -pa0b1=0xfa24 -pa0b2=0xfe70 -pa0itssit=62 -pa0maxpwr=0x48 -pmon_ver=CFE 3.61.13.0 -scratch=a0180000 -sdram_config=0x0022 -sdram_init=0x0008 -sdram_ncdl=0x24 -sdram_refresh=0x0000 -sromrev=2 -vlan0hwname=et0 -vlan0ports=1 2 3 4 5* -vlan1hwname=et0 -vlan1ports=0 5 -watchdog=5000 -wl0_active_mac= -wl0_afterburner=auto -wl0_antdiv=-1 -wl0_ap_ip= -wl0_ap_isolate=0 -wl0_ap_ssid= -wl0_auth=0 -wl0_auth_mode=open -wl0_bcn=100 -wl0_channel=6 -wl0_closed=0 -wl0_corerev=7 -wl0_country=Worldwide -wl0_country_code=AU -wl0_crypto=tkip -wl0_dtim=1 -wl0_frag=2346 -wl0_frameburst=on -wl0_gmode=6 -wl0_gmode_protection=off -wl0_hwaddr=00:0F:66:C8:74:46 -wl0_ifname=eth1 -wl0_infra=1 -wl0_key1= -wl0_key2= -wl0_key3= -wl0_key4= -wl0_key=1 -wl0_lazywds=1 -wl0_mac_deny= -wl0_mac_list= -wl0_maclist= -wl0_macmode1=disabled -wl0_macmode=disabled -wl0_mode=ap -wl0_mrate=0 -wl0_net_mode=mixed -wl0_passphrase= -wl0_phytype=g -wl0_phytypes=g -wl0_plcphdr=long -wl0_radio=1 -wl0_radioids=BCM2050 -wl0_radius_ipaddr= -wl0_radius_key= -wl0_radius_port=1812 -wl0_rate=0 -wl0_rateset=default -wl0_rts=2347 -wl0_ssid=linksys -wl0_unit=0 -wl0_wds= -wl0_wep=disabled -wl0_wep_bit=64 -wl0_wep_buf= -wl0_wep_gen= -wl0_wep_last= -wl0_wpa_gtk_rekey=3600 -wl0_wpa_psk= -wl0gpio2=0 -wl0gpio3=0 -wl0id=0x4320 -wl_country_code=AU diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v10/pci.txt b/openwrt/docs/hardware/linksys/wrt54gs_v10/pci.txt deleted file mode 100644 index 2be172663f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v10/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt deleted file mode 100644 index 8a5ba8fd99..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt +++ /dev/null @@ -1,11 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 215.44 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt deleted file mode 100644 index 22afd53dc2..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt +++ /dev/null @@ -1,83 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST -Determined physical RAM map: - memory: 02000000 @ 00000000 (usable) -On node 0 totalpages: 8192 -zone(0): 8192 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 216 MHz -Using 108.000 MHz high precision timer. -Calibrating delay loop... 215.44 BogoMIPS -Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) -Inode cache hash table entries: 2048 (order: 2, 16384 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 8192 (order: 3, 32768 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x20000,blocks=64 -Using buffer write method -Flash device: 0x800000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x007e0000 : "linux" -0x000c0000-0x007e0000 : "rootfs" -0x007e0000-0x00800000 : "nvram" -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 2048 bind 4096) -ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000708 -jffs2.bbc: SIZE compression mode activated. -b44.c:v0.93 (Mar, 2004) -PCI: Setting latency timer of device 00:02.0 to 64 -eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt deleted file mode 100644 index 325f4cd737..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt +++ /dev/null @@ -1,21 +0,0 @@ -Linksys WRT54GS v1.1 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 - -CPU: BCM4712 at 216 MHz -RAM: 32 MB -Flash: 8 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed -cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30) -pci.txt: contents of /proc/pci (2.4.30) -dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg) - -Notes: -CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load. diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt deleted file mode 100644 index 9baf982af0..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt +++ /dev/null @@ -1,94 +0,0 @@ -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=off -boardrev=0x10 -il0macaddr=00:13:10:07:ee:fe -bootnv_ver=2 -et0macaddr=00:13:10:07:EE:FC -boot_wait=on -watchdog=5000 -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -pmon_ver=CFE 3.61.13.0 -wl0_ifname=eth1 -gpio5=robo_reset -vlan0ports=1 2 3 4 5* -wl0_mode=ap -wl0_ap_isolate=0 -os_flash_addr=bfc40000 -wl0_gmode=6 -sromrev=2 -boardtype=0x0708 -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=OpenWrt -wl0_key1= -wl0id=0x4320 -wl0_key2= -wl0_key3= -wl0_key4= -ag0=255 -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=0 -wl0_macmode=disabled -wl0_radioids=BCM2050 -wl0_phytype=g -wl0gpio2=0 -wl0_lazywds=0 -wl0gpio3=0 -boardflags2=0 -wl0_afterburner=auto -wl0_antdiv=-1 -wl0_wpa_psk= -wl0_unit=0 -wl_country_code=AU -pa0itssit=62 -wl0_wds= -cctl=0 -wl0_radius_port=1812 -wl0_auth=0 -wl0_radius_ipaddr= -pa0maxpwr=0x4e -clkfreq=216 -lan_ipaddr=192.168.1.1 -vlan1hwname=et0 -aa0=3 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -sdram_config=0x0062 -wl0_country= -vlan1ports=0 5 -scratch=a0180000 -eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9 -ccode=0 -wl0_rateset=default -eou_device_id=F7QVRQQK -boardflags=0x0318 -sdram_refresh=0x0000 -sdram_ncdl=0xff0007 -wl0_rts=2347 -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:13:10:07:EE:FE -wl0_gmode_protection=auto -pa0b0=0x15eb -wl0_maclist= -pa0b1=0xfa82 -pa0b2=0xfe66 -sdram_init=0x000b -vlan0hwname=et0 -dl_ram_addr=a0001000 -wl0_radius_key= -wl0_corerev=7 -wl0_channel=11 -wl0_auth_mode=open -boot_ver=v3.4 -wl0_crypto=tkip -boardnum=42 -eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11 diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt deleted file mode 100644 index 2be172663f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/motorola/WR850Gv2/cpuinfo.txt b/openwrt/docs/hardware/motorola/WR850Gv2/cpuinfo.txt deleted file mode 100755 index 4e960e3da7..0000000000 --- a/openwrt/docs/hardware/motorola/WR850Gv2/cpuinfo.txt +++ /dev/null @@ -1,16 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.06 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available -dcache hits : 3472883705 -dcache misses : 2645294829 -icache hits : 4257216234 -icache misses : 4290730622 -instructions : 0 diff --git a/openwrt/docs/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt b/openwrt/docs/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt deleted file mode 100755 index 2d8b4b886b..0000000000 --- a/openwrt/docs/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt +++ /dev/null @@ -1,97 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (root@reboot2.lan) (gcc version 3.3.5) #1 Fri Mar 4 02:35:42 EST 2005 -Determined physical RAM map: - memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.06 BogoMIPS -Memory: 14036k/16384k available (1482k kernel code, 2348k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x20000,blocks=32 -Using buffer write method -Flash device: 0x400000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003e0000 : "linux" -0x00100000-0x003e0000 : "rootfs" -0x003e0000-0x00400000 : "nvram" -sflash: found no supported devices -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -cramfs: wrong magic -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000101 -using v2 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface -br0: port 2(eth1) entering disabled state -br0: port 1(vlan0) entering disabled state -br0: port 2(eth1) entering disabled state -device eth1 left promiscuous mode -br0: port 1(vlan0) entering disabled state -device vlan0 left promiscuous mode diff --git a/openwrt/docs/hardware/motorola/WR850Gv2/ifconfig.txt b/openwrt/docs/hardware/motorola/WR850Gv2/ifconfig.txt deleted file mode 100755 index 9e61bc658b..0000000000 --- a/openwrt/docs/hardware/motorola/WR850Gv2/ifconfig.txt +++ /dev/null @@ -1,39 +0,0 @@ -eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55 - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:32241 errors:0 dropped:0 overruns:0 frame:0 - TX packets:64392 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:2192583 (2.0 MiB) TX bytes:91374468 (87.1 MiB) - Interrupt:5 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:90:4C:75:04:00 - inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:823 errors:0 dropped:0 overruns:0 frame:37474 - TX packets:753 errors:2 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:68341 (66.7 KiB) TX bytes:69022 (67.4 KiB) - Interrupt:4 Base address:0x1000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan0 Link encap:Ethernet HWaddr 00:11:22:33:44:55 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:32241 errors:0 dropped:0 overruns:0 frame:0 - TX packets:64293 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:1612245 (1.5 MiB) TX bytes:91315662 (87.0 MiB) - -vlan1 Link encap:Ethernet HWaddr 00:11:22:33:44:55 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:99 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:58806 (57.4 KiB) - diff --git a/openwrt/docs/hardware/motorola/WR850Gv2/nvram.txt b/openwrt/docs/hardware/motorola/WR850Gv2/nvram.txt deleted file mode 100755 index 24837d46f9..0000000000 --- a/openwrt/docs/hardware/motorola/WR850Gv2/nvram.txt +++ /dev/null @@ -1,52 +0,0 @@ -boardtype=0x0101 -boardnum=44 -boardrev=0x10 -boardflags=0x0188 -boardflags2=0 -sromrev=2 -clkfreq=200 -sdram_init=0x0 -sdram_config=0x0032 -sdram_refresh=0x0000 -sdram_ncdl=0x21 -et0macaddr=00:11:22:33:44:55 -et0phyaddr=30 -et0mdcport=0 -et1macaddr=00:11:22:33:44:56 -gpio2=adm_eecs -gpio3=adm_eesk -gpio4=adm_eedi -gpio5=adm_rc -vlan0ports=0 1 2 3 5* -vlan0hwname=et0 -vlan1ports=4 5 -vlan1hwname=et0 -et1phyaddr=0x1f -wl0id=0x4320 -il0macaddr=00:90:4c:75:04:00 -aa0=3 -ag0=255 -pa0maxpwr=60 -pa0itssit=62 -pa0b0=0x119a -pa0b1=0xfb93 -pa0b2=0xfea5 -wl0gpio0=0 -wl0gpio1=0 -wl0gpio2=0 -wl0gpio3=0 -wlogpio4=0 -wl0gpio5=0 -cctl=0 -ccode=0 -dl_ram_addr=a0001000 -os_ram_addr=80001000 -os_flash_addr=bfc40000 -lan_ipaddr=192.168.1.1 -lan_netmask=255.255.255.0 -scratch=a0180000 -boot_wait=off -watchdog=0 -move_to_defaults=1 -CFEver=MotoWRv203 -flag_MAC=1 diff --git a/openwrt/docs/hardware/motorola/WR850Gv2/pci.txt b/openwrt/docs/hardware/motorola/WR850Gv2/pci.txt deleted file mode 100755 index cd7aafc136..0000000000 --- a/openwrt/docs/hardware/motorola/WR850Gv2/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/openwrt/docs/hardware/soekris/net4801/cpuinfo.txt b/openwrt/docs/hardware/soekris/net4801/cpuinfo.txt deleted file mode 100644 index 6e9e9cb2b4..0000000000 --- a/openwrt/docs/hardware/soekris/net4801/cpuinfo.txt +++ /dev/null @@ -1,18 +0,0 @@ -root@OpenWrt:/# cat /proc/cpuinfo  -processor : 0 -vendor_id : Geode by NSC -cpu family : 5 -model : 9 -model name : Unknown -stepping : 1 -cpu MHz : 266.650 -fdiv_bug : no -hlt_bug : no -f00f_bug : no -coma_bug : no -fpu : yes -fpu_exception : yes -cpuid level : 2 -wp : yes -flags : fpu tsc msr cx8 cmov mmx cxmmx -bogomips : 532.48 diff --git a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt b/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt deleted file mode 100644 index afde786315..0000000000 --- a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt +++ /dev/null @@ -1,104 +0,0 @@ -Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005 -BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) - BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) - BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) - BIOS-e820: 0000000000100000 - 0000000008000000 (usable) - BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) -128MB LOWMEM available. -On node 0 totalpages: 32768 -zone(0): 4096 pages. -zone(1): 28672 pages. -zone(2): 0 pages. -DMI not present. -Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8 -Initializing CPU#0 -Detected 266.650 MHz processor. -Calibrating delay loop... 532.48 BogoMIPS -Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem) -Checking if this processor honours the WP bit even in supervisor mode... Ok. -Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) -Inode cache hash table entries: 8192 (order: 4, 65536 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) -Page-cache hash table entries: 32768 (order: 5, 131072 bytes) -CPU: After generic, caps: 00808131 00818131 00000000 00000001 -CPU: Common caps: 00808131 00818131 00000000 00000001 -CPU: NSC Unknown stepping 01 -Checking 'hlt' instruction... OK. -POSIX conformance testing by UNIFIX -PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0 -PCI: Using configuration type 1 -PCI: Probing PCI hardware -PCI: Probing PCI hardware (bus 00) -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0x03f8 (irq = 4) is a 16550A -ttyS01 at 0x02f8 (irq = 3) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 -ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx -SC1200: IDE controller at PCI slot 00:12.2 -SC1200: chipset revision 1 -SC1200: not 100% native mode: will probe irqs later - ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio - ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio -hda: Transcend 256M, CFA DISK drive -hdb: HTS424030M9AT00, ATA DISK drive -SC1200: set xfer mode failure -hdb: sc1200_set_xfer_mode(UDMA 2) -blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff) -ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 -hda: attached ide-disk driver. -hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32 -hdb: attached ide-disk driver. -hdb: host protected area => 1 -hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33) -Partition check: - /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 - /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 - /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 -blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB -blkmtd: version 1.10 -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 1024 buckets, 8Kbytes -TCP: Hash tables configured (established 8192 bind 16384) -ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 80k freed -jffs2.bbc: SIZE compression mode activated. -natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 - originally by Donald Becker - http://www.scyld.com/network/natsemi.html - 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder -eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10. -eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10. -eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10. -device eth0 entered promiscuous mode -eth0: link up. -eth0: Setting full-duplex based on negotiated link capability. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -br0: port 1(eth0) entering learning state -br0: port 1(eth0) entering forwarding state -br0: topology change detected, propagating diff --git a/openwrt/docs/hardware/soekris/net4801/info.txt b/openwrt/docs/hardware/soekris/net4801/info.txt deleted file mode 100644 index 94fbffb3ac..0000000000 --- a/openwrt/docs/hardware/soekris/net4801/info.txt +++ /dev/null @@ -1,19 +0,0 @@ -Soekris Engineering net4801 - -Online Description from Linksys: -http://www.soekris.com/net4801.htm - -CPU: Geode SC1100 by NSC @ 266 Mhz -RAM: 128 MB -1 National Semiconductor DP8381 Ethernet Controler - 3 10/100 Mbps ports -1 CompactFLASH Type I/II socket -1 UltraDMA-33 interface (44 pins) for 2.5" HDD -1 Mini-PCI type III socket -1 PCI Slot (3.3V) -1 USB 1.1 port -2 serial ports (external DB9 and internal 10 pins header) - -List of files: -cpuinfo.txt: contents of /proc/cpuinfo (2.4.30) -pci.txt: contents of /proc/pci (2.4.30) -dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 diff --git a/openwrt/docs/hardware/soekris/net4801/pci.txt b/openwrt/docs/hardware/soekris/net4801/pci.txt deleted file mode 100644 index 7a53166c8f..0000000000 --- a/openwrt/docs/hardware/soekris/net4801/pci.txt +++ /dev/null @@ -1,40 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0600: PCI device 1078:0001 (rev 0). - Bus 0, device 6, function 0: - Class 0200: PCI device 100b:0020 (rev 0). - IRQ 10. - Master Capable. Latency=63. Min Gnt=11.Max Lat=52. - I/O at 0xe100 [0xe1ff]. - Non-prefetchable 32 bit memory at 0xa0000000 [0xa0000fff]. - Bus 0, device 7, function 0: - Class 0200: PCI device 100b:0020 (rev 0). - IRQ 10. - Master Capable. Latency=63. Min Gnt=11.Max Lat=52. - I/O at 0xe200 [0xe2ff]. - Non-prefetchable 32 bit memory at 0xa0001000 [0xa0001fff]. - Bus 0, device 8, function 0: - Class 0200: PCI device 100b:0020 (rev 0). - IRQ 10. - Master Capable. Latency=63. Min Gnt=11.Max Lat=52. - I/O at 0xe300 [0xe3ff]. - Non-prefetchable 32 bit memory at 0xa0002000 [0xa0002fff]. - Bus 0, device 18, function 0: - Class 0601: PCI device 100b:0510 (rev 0). - Master Capable. Latency=63. - I/O at 0x6100 [0x613f]. - I/O at 0x6200 [0x623f]. - Bus 0, device 18, function 1: - Class 0680: PCI device 100b:0511 (rev 0). - I/O at 0x6300 [0x63ff]. - Bus 0, device 18, function 2: - Class 0101: PCI device 100b:0502 (rev 1). - I/O at 0xe000 [0xe00f]. - Bus 0, device 18, function 5: - Class 0680: PCI device 100b:0515 (rev 0). - I/O at 0x6500 [0x653f]. - Bus 0, device 19, function 0: - Class 0c03: PCI device 0e11:a0f8 (rev 8). - IRQ 11. - Master Capable. Latency=56. Max Lat=80. - Non-prefetchable 32 bit memory at 0xa0003000 [0xa0003fff]. diff --git a/openwrt/docs/network.txt b/openwrt/docs/network.txt new file mode 100644 index 0000000000..5610e1d6da --- /dev/null +++ b/openwrt/docs/network.txt @@ -0,0 +1,50 @@ + Network configuration in buildroot-ng + + +The network configuration in buildroot-ng is stored in /etc/config/network +and is divided into interface configurations. +Each interface configuration either refers directly to an ethernet/wifi +interface (eth0, wl0, ..) or to a bridge containing multiple interfaces. +It looks like this: + + config interface "lan" + option ifname "eth0" + option proto "static" + option ipaddr "192.168.1.1" + option netmask "255.255.255.0" + option gateway "192.168.1.254" + option dns "192.168.1.254" + +"ifname" specifies the Linux interface name. +If you want to use bridging on one or more interfaces, set "ifname" to a list +of interfaces and add: + option type "bridge" + +It is possible to use VLAN tagging on an interface simply by adding the VLAN IDs +to it, e.g. "eth0.1". These can be nested as well. + +This sets up a simple static configuration for eth0. "proto" specifies the +'protocol' used for the interface. The default image usually provides 'none' +'static', 'dhcp' and 'pppoe'. Others can be added by installing additional +packages. + +When using the 'static' method like in the example, the options "ipaddr" and +"netmask" are mandatory, while "gateway" and "dns" are optional. +DHCP currently only accepts "ipaddr" (IP address to request from the server) +and "hostname" (client hostname identify as) - both are optional. + +PPP based protocols (pppoe, pptp, ...) accept these options: + username: + The PPP username (usually with PAP authentication) + password: + The PPP password + keepalive: + Ping the PPP server (using LCP). The value of this option + specifies the maximum number of failed pings before reconnecting. + The ping interval defaults to 5, but can be changed by appending + "," to the keepalive value + demand: + Use Dial on Demand (value specifies the maximum idle time) + +For all protocol types, you can also specify the MTU by using the "mtu" option. + diff --git a/openwrt/docs/stylesheet.css b/openwrt/docs/stylesheet.css deleted file mode 100644 index 2c36417823..0000000000 --- a/openwrt/docs/stylesheet.css +++ /dev/null @@ -1,65 +0,0 @@ -body { - margin: 0px 0px 0px 0px; - color: white; - background-color: #93c6f9; - font: 12pt/18pt georgia; -} - -div.main { - margin: 10px 10px 10px 10px; - padding: 10px 10px 10px 10px; - color: black; - background-color: white; -} - -div.titre { - text-align: center; - background-color: #336699; - color: white; - padding: 10px 10px 10px 10px; -} - -h1 { - text-align: center; - font: 26pt georgia; - letter-spacing: 3px; -} - -h2 { - padding: 5px 5px 5px 5px; - background-color: #c2e0ff; - color: #336699; -} - -a:link, a:visited { - font-weight: bold; - text-decoration: none; - color: #336699; -} - -a:hover, a:active { - text-decoration: underline; - color: #9685BA; -} - -h3 { - font: italic normal 14pt georgia; - letter-spacing: 1px; - margin-bottom: 0px; - margin-left: 10px; - margin-right: 10px; - color: #336699; -} - -p { - margin-left: 10px; - margin-right: 10px; - text-align: justify; -} - -pre { - border-left: 3px #aaa solid; - margin-left: 1em; - padding: 0 1em; - color: #888; -} \ No newline at end of file -- 2.30.2