+++ /dev/null
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Busybox Library Tuning"
-
-config BUSYBOX_CONFIG_FEATURE_SYSTEMD
- bool "Enable systemd support"
- default n
- help
- If you plan to use busybox daemons on a system where daemons
- are controlled by systemd, enable this option.
- If you don't use systemd, it is still safe to enable it,
- but the downside is increased code size.
-config BUSYBOX_CONFIG_FEATURE_RTMINMAX
- bool "Support RTMIN[+n] and RTMAX[-n] signal names"
- default n
- help
- Support RTMIN[+n] and RTMAX[-n] signal names
- in kill, killall etc. This costs ~250 bytes.
-
-config BUSYBOX_CONFIG_PASSWORD_MINLEN
- int "Minimum password length"
- default 6
- range 5 32
- help
- Minimum allowable password length.
-
-config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
- int "MD5: Trade bytes for speed (0:fast, 3:slow)"
- default 2
- range 0 3
- help
- Trade binary size versus speed for the md5sum algorithm.
- Approximate values running uClibc and hashing
- linux-2.4.4.tar.bz2 were:
- user times (sec) text size (386)
- 0 (fastest) 1.1 6144
- 1 1.4 5392
- 2 3.0 5088
- 3 (smallest) 5.1 4912
-
-config BUSYBOX_CONFIG_FEATURE_FAST_TOP
- bool "Faster /proc scanning code (+100 bytes)"
- default y
- help
- This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
- but code size is slightly bigger.
-
-config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
- bool "Support for /etc/networks"
- default n
- help
- Enable support for network names in /etc/networks. This is
- a rarely used feature which allows you to use names
- instead of IP/mask pairs in route command.
-
-config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
- bool "Use termios to manipulate the screen"
- default n
- depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
- help
- This option allows utilities such as 'more' and 'top' to determine
- the size of the screen. If you leave this disabled, your utilities
- that display things on the screen will be especially primitive and
- will be unable to determine the current screen size, and will be
- unable to move the cursor.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING
- bool "Command line editing"
- default y
- help
- Enable line editing (mainly for shell command line).
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
- int "Maximum length of input"
- range 128 8192
- default 512
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Line editing code uses on-stack buffers for storage.
- You may want to decrease this parameter if your target machine
- benefits from smaller stack usage.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_VI
- bool "vi-style line editing commands"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Enable vi-style line editing. In shells, this mode can be
- turned on and off with "set -o vi" and "set +o vi".
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
- int "History size"
- # Don't allow way too big values here, code uses fixed "char *history[N]" struct member
- range 0 9999
- default 256
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Specify command history size (0 - disable).
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
- bool "History saving"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Enable history saving in shells.
-
-config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
- bool "Reverse history search"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
- help
- Enable readline-like Ctrl-R combination for reverse history search.
- Increases code by about 0.5k.
-
-config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
- bool "Tab completion"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Enable tab completion.
-
-config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION
- bool "Username completion"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
- help
- Enable username completion.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
- bool "Fancy shell prompts"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Setting this option allows for prompts to use things like \w and
- \$ and escape codes.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
- bool "Query cursor position from terminal"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_EDITING
- help
- Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
- current cursor position. This information is used to make line
- editing more robust in some cases.
- If you are not sure whether your terminals respond to this code
- correctly, or want to save on code size (about 400 bytes),
- then do not turn this option on.
-
-config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
- bool "Non-POSIX, but safer, copying to special nodes"
- default y
- help
- With this option, "cp file symlink" will delete symlink
- and create a regular file. This does not conform to POSIX,
- but prevents a symlink attack.
- Similarly, "cp file device" will not send file's data
- to the device. (To do that, use "cat file >device")
-
-config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
- bool "Give more precise messages when copy fails (cp, mv etc)"
- default n
- help
- Error messages with this feature enabled:
- $ cp file /does_not_exist/file
- cp: cannot create '/does_not_exist/file': Path does not exist
- $ cp file /vmlinuz/file
- cp: cannot stat '/vmlinuz/file': Path has non-directory component
- If this feature is not enabled, they will be, respectively:
- cp: cannot create '/does_not_exist/file': No such file or directory
- cp: cannot stat '/vmlinuz/file': Not a directory
- This will cost you ~60 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
- int "Copy buffer size, in kilobytes"
- range 1 1024
- default 4
- help
- Size of buffer used by cp, mv, install, wget etc.
- Buffers which are 4 kb or less will be allocated on stack.
- Bigger buffers will be allocated with mmap, with fallback to 4 kb
- stack buffer if mmap fails.
-
-config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
- bool "Skip rootfs in mount table"
- default n
- help
- Ignore rootfs entry in mount table.
-
- In Linux, kernel has a special filesystem, rootfs, which is initially
- mounted on /. It contains initramfs data, if kernel is configured
- to have one. Usually, another file system is mounted over / early
- in boot process, and therefore most tools which manipulate
- mount table, such as df, will skip rootfs entry.
-
- However, some systems do not mount anything on /.
- If you need to configure busybox for one of these systems,
- you may find useful to turn this option off to make df show
- initramfs statistic.
-
- Otherwise, choose Y.
-
-config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
- bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
- time intervals (time, ping, traceroute etc need this).
- Probably requires Linux 2.6+. If not selected, gettimeofday
- will be used instead (which gives wrong results if date/time
- is reset).
-
-config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
- bool "Use ioctl names rather than hex values in error messages"
- default y
- help
- Use ioctl names rather than hex values in error messages
- (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
- saves about 1400 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_HWIB
- bool "Support infiniband HW"
- default n
- help
- Support for printing infiniband addresses in
- network applets.
-
-endmenu
projects / openwrt / staging / florian.git / blobdiff