From a34f96d6cf80c7c3c425076714d9c4caa67e3670 Mon Sep 17 00:00:00 2001 From: Henryk Heisig Date: Thu, 13 Oct 2016 21:00:06 +0200 Subject: [PATCH] ramips: Archer C50 cleanup - setting read-only flag to important partitions - enabling PA to improve 2.4 GHz signal strength - add missing leds - rename colour led - add mac adress to 5GHz wlan interface - included and Signed-off-by: Henryk Heisig hyniu@o2.pl --- .../ramips/base-files/etc/board.d/01_leds | 11 ++-- target/linux/ramips/base-files/etc/diag.sh | 4 +- target/linux/ramips/dts/ArcherC50.dts | 63 ++++++++++++++----- 3 files changed, 54 insertions(+), 24 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index d1c83d748a..27e15caf4d 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -88,11 +88,12 @@ c20i) ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio" ;; c50) - ucidef_set_led_default "power" "power" "$board:blue:power" "0" - ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" "eth0.2" - set_usb_led "$board:blue:usb" - ucidef_set_led_wlan "wlan2g" "wlan2g" "$board:blue:wlan2g" "phy1radio" - ucidef_set_led_wlan "wlan5g" "wlan5g" "$board:blue:wlan5g" "phy0radio" + ucidef_set_led_default "power" "power" "$board:green:power" "0" + ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01" + set_usb_led "$board:green:usb" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1 + set_wifi_led "$board:green:wlan5g" ;; cf-wr800n) ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1 diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index b6d845f940..ff8f4c5118 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -19,6 +19,7 @@ get_status_led() { asl26555|\ br-6425|\ br-6475nd|\ + c50|\ dch-m225|\ dir-860l-b1|\ e1700|\ @@ -91,9 +92,6 @@ get_status_led() { wrh-300cr) status_led="$board:green:wps" ;; - c50) - status_led="tp-link:blue:power" - ;; cf-wr800n|\ psg1208) status_led="$board:white:wps" diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts index 44753efb01..3924cc41fa 100644 --- a/target/linux/ramips/dts/ArcherC50.dts +++ b/target/linux/ramips/dts/ArcherC50.dts @@ -1,4 +1,6 @@ /dts-v1/; +#include +#include #include "mt7620a.dtsi" @@ -14,28 +16,43 @@ compatible = "gpio-leds"; lan { - label = "c50:blue:lan"; - gpios = <&gpio0 1 1>; + label = "c50:green:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; power { - label = "c50:blue:power"; - gpios = <&gpio0 7 0>; + label = "c50:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; usb { - label = "c50:blue:usb"; - gpios = <&gpio0 9 1>; + label = "c50:green:usb"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "c50:green:wan"; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + wan_orange { + label = "c50:orange:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; wlan5g { - label = "c50:blue:wlan5g"; - gpios = <&gpio0 11 1>; + label = "c50:green:wlan5g"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "c50:blue:wlan2g"; - gpios = <&gpio3 0 1>; + label = "c50:green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c50:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -47,17 +64,21 @@ reset { label = "reset"; - gpios = <&gpio0 13 1>; - linux,code = <0x198>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; }; rfkill { label = "rfkill"; - gpios = <&gpio0 2 1>; - linux,code = <0xf7>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; }; }; }; +&gpio1 { + status = "okay"; +}; + &gpio2 { status = "okay"; }; @@ -91,21 +112,25 @@ partition@7c0000 { label = "config"; reg = <0x7c0000 0x10000>; + read-only; }; rom: partition@7d0000 { label = "rom"; reg = <0x7d0000 0x10000>; + read-only; }; partition@7e0000 { label = "romfile"; reg = <0x7e0000 0x10000>; + read-only; }; radio: partition@7f0000 { label = "radio"; reg = <0x7f0000 0x10000>; + read-only; }; }; }; @@ -113,15 +138,19 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd"; ralink,function = "gpio"; }; + + pa { + ralink,group = "pa"; + ralink,function = "pa"; + }; }; }; ðernet { pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; mtd-mac-address = <&rom 0xf100>; mediatek,portmap = "wllll"; }; @@ -151,6 +180,8 @@ device_type = "pci"; mediatek,mtd-eeprom = <&radio 32768>; mediatek,2ghz = <0>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-1)>; }; }; }; -- 2.30.2