bcm27xx: remove linux 4.19 support

[openwrt/staging/luka.git] / target / linux / bcm27xx / patches-4.19 / 950-0734-overlays-Add-w5500-overlay.patch

diff --git a/target/linux/bcm27xx/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch
deleted file mode 100644 (file)
index 2641a5b..0000000
--- a/target/linux/bcm27xx/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From cb9a896a799393b3cb5947bef3c95eb5ffb44776 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 10 Oct 2019 09:08:47 +0100
-Subject: [PATCH] overlays: Add w5500 overlay
-
-Add an overlay to configure the Wiznet W5500 Ethernet controller on
-SPI0. The 'cs' parameter chooses the Chip Select (default 0).
-
-See: https://github.com/raspberrypi/linux/issues/3276
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile          |  1 +
- arch/arm/boot/dts/overlays/README            | 10 ++++
- arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 ++++++++++++++++++++
- 3 files changed, 74 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -183,6 +183,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       vga666.dtbo \
-       w1-gpio.dtbo \
-       w1-gpio-pullup.dtbo \
-+      w5500.dtbo \
-       wittypi.dtbo
- 
- targets += dtbs dtbs_install
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -2538,6 +2538,16 @@ Params: gpiopin                 GPIO for
-         pullup                  Now enabled by default (ignored)
- 
- 
-+Name:   w5500
-+Info:   Overlay for the Wiznet W5500 Ethernet Controller on SPI0
-+Load:   dtoverlay=w5500,<param>=<val>
-+Params: int_pin                 GPIO used for INT (default 25)
-+
-+        speed                   SPI bus speed (default 30000000)
-+
-+        cs                      SPI bus Chip Select (default 0)
-+
-+
- Name:   wittypi
- Info:   Configures the wittypi RTC module.
- Load:   dtoverlay=wittypi,<param>=<val>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/w5500-overlay.dts
-@@ -0,0 +1,63 @@
-+// Overlay for the Wiznet w5500 Ethernet Controller
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "brcm,bcm2835";
-+
-+      fragment@0 {
-+              target = <&spidev0>;
-+              __overlay__ {
-+                      status = "disabled";
-+              };
-+      };
-+
-+      fragment@1 {
-+              target = <&spidev1>;
-+              __dormant__ {
-+                      status = "disabled";
-+              };
-+      };
-+
-+      fragment@2 {
-+              target = <&spi0>;
-+              __overlay__ {
-+                      /* needed to avoid dtc warning */
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+
-+                      status = "okay";
-+
-+                      eth1: w5500@0{
-+                              compatible = "wiznet,w5500";
-+                              reg = <0>; /* CE0 */
-+                              pinctrl-names = "default";
-+                              pinctrl-0 = <&eth1_pins>;
-+                              interrupt-parent = <&gpio>;
-+                              interrupts = <25 0x8>;
-+                              spi-max-frequency = <30000000>;
-+//                            local-mac-address = [aa bb cc dd ee ff];
-+                              status = "okay";
-+                      };
-+              };
-+      };
-+
-+      fragment@3 {
-+              target = <&gpio>;
-+              __overlay__ {
-+                      eth1_pins: eth1_pins {
-+                              brcm,pins = <25>;
-+                              brcm,function = <0>; /* in */
-+                              brcm,pull = <0>; /* none */
-+                      };
-+              };
-+      };
-+
-+      __overrides__ {
-+              int_pin = <&eth1>, "interrupts:0",
-+                        <&eth1_pins>, "brcm,pins:0";
-+              speed   = <&eth1>, "spi-max-frequency:0";
-+              cs      = <&eth1>, "reg:0",
-+                        <0>, "!0=1";
-+      };
-+};