ramips/mt76x8: Name DTS files based on scheme

[openwrt/staging/lynxis.git] / target / linux / ramips / dts / TL-WR902ACV3.dts

diff --git a/target/linux/ramips/dts/TL-WR902ACV3.dts b/target/linux/ramips/dts/TL-WR902ACV3.dts
deleted file mode 100644 (file)
index 1d63431..0000000
--- a/target/linux/ramips/dts/TL-WR902ACV3.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
-       model = "TP-Link TL-WR902AC v3";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               sw1 {
-                       label = "sw1";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-
-               sw2 {
-                       label = "sw2";
-                       gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_1>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan {
-                       label = "tl-wr902ac-v3:green:lan";
-                       gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_power: power {
-                       label = "tl-wr902ac-v3:green:power";
-                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-               };
-
-               usb {
-                       label = "tl-wr902ac-v3:green:usb";
-                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
-                       linux,default-trigger = "usbport";
-               };
-
-               wan {
-                       label = "tl-wr902ac-v3:green:wan";
-                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan {
-                       label = "tl-wr902ac-v3:green:wlan";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-               };
-
-               wps {
-                       label = "tl-wr902ac-v3:green:wps";
-                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x28000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&factory 0xf100>;
-               mtd-mac-address-increment = <(-1)>;
-       };
-};