--- /dev/null
+From c6a0637460c29799f1e63a6a4a65bda22caf4a54 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Wed, 6 Jul 2016 08:31:34 +0200
+Subject: clk: sunxi-ng: Add A64 clocks
+
+Add the A64 CCU clocks set.
+
+Acked-by: Rob Herring <robh@kernel.org>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ .../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
+ drivers/clk/sunxi-ng/Kconfig | 11 +
+ drivers/clk/sunxi-ng/Makefile | 1 +
+ drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 915 +++++++++++++++++++++
+ drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++
+ include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++
+ include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++
+ 7 files changed, 1232 insertions(+)
+ create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+ create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
+ create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
+ create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
+
+--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
++++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+@@ -7,6 +7,7 @@ Required properties :
+ - "allwinner,sun8i-a23-ccu"
+ - "allwinner,sun8i-a33-ccu"
+ - "allwinner,sun8i-h3-ccu"
++ - "allwinner,sun50i-a64-ccu"
+
+ - reg: Must contain the registers base address and length
+ - clocks: phandle to the oscillators feeding the CCU. Two are needed:
+--- a/drivers/clk/sunxi-ng/Kconfig
++++ b/drivers/clk/sunxi-ng/Kconfig
+@@ -53,6 +53,17 @@ config SUNXI_CCU_MP
+
+ # SoC Drivers
+
++config SUN50I_A64_CCU
++ bool "Support for the Allwinner A64 CCU"
++ select SUNXI_CCU_DIV
++ select SUNXI_CCU_NK
++ select SUNXI_CCU_NKM
++ select SUNXI_CCU_NKMP
++ select SUNXI_CCU_NM
++ select SUNXI_CCU_MP
++ select SUNXI_CCU_PHASE
++ default ARM64 && ARCH_SUNXI
++
+ config SUN6I_A31_CCU
+ bool "Support for the Allwinner A31/A31s CCU"
+ select SUNXI_CCU_DIV
+--- a/drivers/clk/sunxi-ng/Makefile
++++ b/drivers/clk/sunxi-ng/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o
+ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
+
+ # SoC support
++obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
+ obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
+ obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
+--- /dev/null
++++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+@@ -0,0 +1,915 @@
++/*
++ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/of_address.h>
++#include <linux/platform_device.h>
++
++#include "ccu_common.h"
++#include "ccu_reset.h"
++
++#include "ccu_div.h"
++#include "ccu_gate.h"
++#include "ccu_mp.h"
++#include "ccu_mult.h"
++#include "ccu_nk.h"
++#include "ccu_nkm.h"
++#include "ccu_nkmp.h"
++#include "ccu_nm.h"
++#include "ccu_phase.h"
++
++#include "ccu-sun50i-a64.h"
++
++static struct ccu_nkmp pll_cpux_clk = {
++ .enable = BIT(31),
++ .lock = BIT(28),
++ .n = _SUNXI_CCU_MULT(8, 5),
++ .k = _SUNXI_CCU_MULT(4, 2),
++ .m = _SUNXI_CCU_DIV(0, 2),
++ .p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
++ .common = {
++ .reg = 0x000,
++ .hw.init = CLK_HW_INIT("pll-cpux",
++ "osc24M",
++ &ccu_nkmp_ops,
++ CLK_SET_RATE_UNGATE),
++ },
++};
++
++/*
++ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
++ * the base (2x, 4x and 8x), and one variable divider (the one true
++ * pll audio).
++ *
++ * We don't have any need for the variable divider for now, so we just
++ * hardcode it to match with the clock names
++ */
++#define SUN50I_A64_PLL_AUDIO_REG 0x008
++
++static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
++ "osc24M", 0x008,
++ 8, 7, /* N */
++ 0, 5, /* M */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
++ "osc24M", 0x010,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
++ "osc24M", 0x018,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
++ "osc24M", 0x020,
++ 8, 5, /* N */
++ 4, 2, /* K */
++ 0, 2, /* M */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static struct ccu_nk pll_periph0_clk = {
++ .enable = BIT(31),
++ .lock = BIT(28),
++ .n = _SUNXI_CCU_MULT(8, 5),
++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
++ .fixed_post_div = 2,
++ .common = {
++ .reg = 0x028,
++ .features = CCU_FEATURE_FIXED_POSTDIV,
++ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
++ &ccu_nk_ops, CLK_SET_RATE_UNGATE),
++ },
++};
++
++static struct ccu_nk pll_periph1_clk = {
++ .enable = BIT(31),
++ .lock = BIT(28),
++ .n = _SUNXI_CCU_MULT(8, 5),
++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
++ .fixed_post_div = 2,
++ .common = {
++ .reg = 0x02c,
++ .features = CCU_FEATURE_FIXED_POSTDIV,
++ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
++ &ccu_nk_ops, CLK_SET_RATE_UNGATE),
++ },
++};
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
++ "osc24M", 0x030,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
++ "osc24M", 0x038,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++/*
++ * The output function can be changed to something more complex that
++ * we do not handle yet.
++ *
++ * Hardcode the mode so that we don't fall in that case.
++ */
++#define SUN50I_A64_PLL_MIPI_REG 0x040
++
++struct ccu_nkm pll_mipi_clk = {
++ .enable = BIT(31),
++ .lock = BIT(28),
++ .n = _SUNXI_CCU_MULT(8, 4),
++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
++ .m = _SUNXI_CCU_DIV(0, 4),
++ .common = {
++ .reg = 0x040,
++ .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
++ &ccu_nkm_ops, CLK_SET_RATE_UNGATE),
++ },
++};
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
++ "osc24M", 0x044,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
++ "osc24M", 0x048,
++ 8, 7, /* N */
++ 0, 4, /* M */
++ BIT(24), /* frac enable */
++ BIT(25), /* frac select */
++ 270000000, /* frac rate 0 */
++ 297000000, /* frac rate 1 */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
++ "osc24M", 0x04c,
++ 8, 7, /* N */
++ 0, 2, /* M */
++ BIT(31), /* gate */
++ BIT(28), /* lock */
++ CLK_SET_RATE_UNGATE);
++
++static const char * const cpux_parents[] = { "osc32k", "osc24M",
++ "pll-cpux" , "pll-cpux" };
++static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
++ 0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
++
++static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
++
++static const char * const ahb1_parents[] = { "osc32k", "osc24M",
++ "axi" , "pll-periph0" };
++static struct ccu_div ahb1_clk = {
++ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
++
++ .mux = {
++ .shift = 12,
++ .width = 2,
++
++ .variable_prediv = {
++ .index = 3,
++ .shift = 6,
++ .width = 2,
++ },
++ },
++
++ .common = {
++ .reg = 0x054,
++ .features = CCU_FEATURE_VARIABLE_PREDIV,
++ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
++ ahb1_parents,
++ &ccu_div_ops,
++ 0),
++ },
++};
++
++static struct clk_div_table apb1_div_table[] = {
++ { .val = 0, .div = 2 },
++ { .val = 1, .div = 2 },
++ { .val = 2, .div = 4 },
++ { .val = 3, .div = 8 },
++ { /* Sentinel */ },
++};
++static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
++ 0x054, 8, 2, apb1_div_table, 0);
++
++static const char * const apb2_parents[] = { "osc32k", "osc24M",
++ "pll-periph0-2x" ,
++ "pll-periph0-2x" };
++static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
++ 0, 5, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ 0);
++
++static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
++static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
++ { .index = 1, .div = 2 },
++};
++static struct ccu_mux ahb2_clk = {
++ .mux = {
++ .shift = 0,
++ .width = 1,
++ .fixed_predivs = ahb2_fixed_predivs,
++ .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
++ },
++
++ .common = {
++ .reg = 0x05c,
++ .features = CCU_FEATURE_FIXED_PREDIV,
++ .hw.init = CLK_HW_INIT_PARENTS("ahb2",
++ ahb2_parents,
++ &ccu_mux_ops,
++ 0),
++ },
++};
++
++static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
++ 0x060, BIT(1), 0);
++static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
++ 0x060, BIT(5), 0);
++static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
++ 0x060, BIT(6), 0);
++static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
++ 0x060, BIT(8), 0);
++static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
++ 0x060, BIT(9), 0);
++static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
++ 0x060, BIT(10), 0);
++static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
++ 0x060, BIT(13), 0);
++static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
++ 0x060, BIT(14), 0);
++static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
++ 0x060, BIT(17), 0);
++static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
++ 0x060, BIT(18), 0);
++static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
++ 0x060, BIT(19), 0);
++static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
++ 0x060, BIT(20), 0);
++static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
++ 0x060, BIT(21), 0);
++static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
++ 0x060, BIT(23), 0);
++static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
++ 0x060, BIT(24), 0);
++static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
++ 0x060, BIT(25), 0);
++static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
++ 0x060, BIT(28), 0);
++static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
++ 0x060, BIT(29), 0);
++
++static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
++ 0x064, BIT(0), 0);
++static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
++ 0x064, BIT(3), 0);
++static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
++ 0x064, BIT(4), 0);
++static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
++ 0x064, BIT(5), 0);
++static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
++ 0x064, BIT(8), 0);
++static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
++ 0x064, BIT(11), 0);
++static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
++ 0x064, BIT(12), 0);
++static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
++ 0x064, BIT(20), 0);
++static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
++ 0x064, BIT(21), 0);
++static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
++ 0x064, BIT(22), 0);
++
++static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
++ 0x068, BIT(0), 0);
++static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
++ 0x068, BIT(1), 0);
++static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
++ 0x068, BIT(5), 0);
++static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
++ 0x068, BIT(8), 0);
++static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
++ 0x068, BIT(12), 0);
++static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
++ 0x068, BIT(13), 0);
++static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
++ 0x068, BIT(14), 0);
++
++static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
++ 0x06c, BIT(0), 0);
++static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
++ 0x06c, BIT(1), 0);
++static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
++ 0x06c, BIT(2), 0);
++static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
++ 0x06c, BIT(5), 0);
++static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
++ 0x06c, BIT(16), 0);
++static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
++ 0x06c, BIT(17), 0);
++static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
++ 0x06c, BIT(18), 0);
++static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
++ 0x06c, BIT(19), 0);
++static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
++ 0x06c, BIT(20), 0);
++
++static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
++ 0x070, BIT(7), 0);
++
++static struct clk_div_table ths_div_table[] = {
++ { .val = 0, .div = 1 },
++ { .val = 1, .div = 2 },
++ { .val = 2, .div = 4 },
++ { .val = 3, .div = 6 },
++};
++static const char * const ths_parents[] = { "osc24M" };
++static struct ccu_div ths_clk = {
++ .enable = BIT(31),
++ .div = _SUNXI_CCU_DIV_TABLE(0, 2, ths_div_table),
++ .mux = _SUNXI_CCU_MUX(24, 2),
++ .common = {
++ .reg = 0x074,
++ .hw.init = CLK_HW_INIT_PARENTS("ths",
++ ths_parents,
++ &ccu_div_ops,
++ 0),
++ },
++};
++
++static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
++ "pll-periph1" };
++static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
++ "pll-periph1-2x" };
++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
++static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 4, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
++ 0, 4, /* M */
++ 16, 2, /* P */
++ 24, 2, /* mux */
++ BIT(31), /* gate */
++ 0);
++
++static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
++ "pll-audio-2x", "pll-audio" };
++static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
++ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
++ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
++ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
++ 0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
++ 0x0cc, BIT(8), 0);
++static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
++ 0x0cc, BIT(9), 0);
++static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic",
++ 0x0cc, BIT(10), 0);
++static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M",
++ 0x0cc, BIT(11), 0);
++static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
++ 0x0cc, BIT(16), 0);
++static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0",
++ 0x0cc, BIT(17), 0);
++
++static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
++static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
++ 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
++
++static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
++ 0x100, BIT(0), 0);
++static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
++ 0x100, BIT(1), 0);
++static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
++ 0x100, BIT(2), 0);
++static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
++ 0x100, BIT(3), 0);
++
++static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
++static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
++ 0x104, 0, 4, 24, 3, BIT(31), 0);
++
++static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
++static const u8 tcon0_table[] = { 0, 2, };
++static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
++ tcon0_table, 0x118, 24, 3, BIT(31),
++ CLK_SET_RATE_PARENT);
++
++static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
++static const u8 tcon1_table[] = { 0, 2, };
++struct ccu_div tcon1_clk = {
++ .enable = BIT(31),
++ .div = _SUNXI_CCU_DIV(0, 4),
++ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
++ .common = {
++ .reg = 0x11c,
++ .hw.init = CLK_HW_INIT_PARENTS("tcon1",
++ tcon1_parents,
++ &ccu_div_ops,
++ CLK_SET_RATE_PARENT),
++ },
++};
++
++static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
++static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
++ 0x124, 0, 4, 24, 3, BIT(31), 0);
++
++static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
++ 0x130, BIT(31), 0);
++
++static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
++static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
++ 0x134, 16, 4, 24, 3, BIT(31), 0);
++
++static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1", "pll-periph1" };
++static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
++ 0x134, 0, 5, 8, 3, BIT(15), 0);
++
++static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
++ 0x13c, 16, 3, BIT(31), 0);
++
++static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
++ 0x140, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
++ 0x140, BIT(30), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
++ 0x144, BIT(31), 0);
++
++static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
++static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
++ 0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
++ 0x154, BIT(31), 0);
++
++static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
++ "pll-ddr0", "pll-ddr1" };
++static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
++ 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
++
++static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
++static const u8 dsi_dphy_table[] = { 0, 2, };
++static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
++ dsi_dphy_parents, dsi_dphy_table,
++ 0x168, 0, 4, 8, 2, BIT(31), CLK_SET_RATE_PARENT);
++
++static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
++ 0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
++
++/* Fixed Factor clocks */
++static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 1, 2, 0);
++
++/* We hardcode the divider to 4 for now */
++static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
++ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
++static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
++ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
++static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
++ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
++static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
++ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
++static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
++ "pll-periph0", 1, 2, 0);
++static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
++ "pll-periph1", 1, 2, 0);
++static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
++ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
++
++static struct ccu_common *sun50i_a64_ccu_clks[] = {
++ &pll_cpux_clk.common,
++ &pll_audio_base_clk.common,
++ &pll_video0_clk.common,
++ &pll_ve_clk.common,
++ &pll_ddr0_clk.common,
++ &pll_periph0_clk.common,
++ &pll_periph1_clk.common,
++ &pll_video1_clk.common,
++ &pll_gpu_clk.common,
++ &pll_mipi_clk.common,
++ &pll_hsic_clk.common,
++ &pll_de_clk.common,
++ &pll_ddr1_clk.common,
++ &cpux_clk.common,
++ &axi_clk.common,
++ &ahb1_clk.common,
++ &apb1_clk.common,
++ &apb2_clk.common,
++ &ahb2_clk.common,
++ &bus_mipi_dsi_clk.common,
++ &bus_ce_clk.common,
++ &bus_dma_clk.common,
++ &bus_mmc0_clk.common,
++ &bus_mmc1_clk.common,
++ &bus_mmc2_clk.common,
++ &bus_nand_clk.common,
++ &bus_dram_clk.common,
++ &bus_emac_clk.common,
++ &bus_ts_clk.common,
++ &bus_hstimer_clk.common,
++ &bus_spi0_clk.common,
++ &bus_spi1_clk.common,
++ &bus_otg_clk.common,
++ &bus_ehci0_clk.common,
++ &bus_ehci1_clk.common,
++ &bus_ohci0_clk.common,
++ &bus_ohci1_clk.common,
++ &bus_ve_clk.common,
++ &bus_tcon0_clk.common,
++ &bus_tcon1_clk.common,
++ &bus_deinterlace_clk.common,
++ &bus_csi_clk.common,
++ &bus_hdmi_clk.common,
++ &bus_de_clk.common,
++ &bus_gpu_clk.common,
++ &bus_msgbox_clk.common,
++ &bus_spinlock_clk.common,
++ &bus_codec_clk.common,
++ &bus_spdif_clk.common,
++ &bus_pio_clk.common,
++ &bus_ths_clk.common,
++ &bus_i2s0_clk.common,
++ &bus_i2s1_clk.common,
++ &bus_i2s2_clk.common,
++ &bus_i2c0_clk.common,
++ &bus_i2c1_clk.common,
++ &bus_i2c2_clk.common,
++ &bus_scr_clk.common,
++ &bus_uart0_clk.common,
++ &bus_uart1_clk.common,
++ &bus_uart2_clk.common,
++ &bus_uart3_clk.common,
++ &bus_uart4_clk.common,
++ &bus_dbg_clk.common,
++ &ths_clk.common,
++ &nand_clk.common,
++ &mmc0_clk.common,
++ &mmc1_clk.common,
++ &mmc2_clk.common,
++ &ts_clk.common,
++ &ce_clk.common,
++ &spi0_clk.common,
++ &spi1_clk.common,
++ &i2s0_clk.common,
++ &i2s1_clk.common,
++ &i2s2_clk.common,
++ &spdif_clk.common,
++ &usb_phy0_clk.common,
++ &usb_phy1_clk.common,
++ &usb_hsic_clk.common,
++ &usb_hsic_12m_clk.common,
++ &usb_ohci0_clk.common,
++ &usb_ohci1_clk.common,
++ &dram_clk.common,
++ &dram_ve_clk.common,
++ &dram_csi_clk.common,
++ &dram_deinterlace_clk.common,
++ &dram_ts_clk.common,
++ &de_clk.common,
++ &tcon0_clk.common,
++ &tcon1_clk.common,
++ &deinterlace_clk.common,
++ &csi_misc_clk.common,
++ &csi_sclk_clk.common,
++ &csi_mclk_clk.common,
++ &ve_clk.common,
++ &ac_dig_clk.common,
++ &ac_dig_4x_clk.common,
++ &avs_clk.common,
++ &hdmi_clk.common,
++ &hdmi_ddc_clk.common,
++ &mbus_clk.common,
++ &dsi_dphy_clk.common,
++ &gpu_clk.common,
++};
++
++static struct clk_hw_onecell_data sun50i_a64_hw_clks = {
++ .hws = {
++ [CLK_OSC_12M] = &osc12M_clk.hw,
++ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
++ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
++ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
++ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
++ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
++ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
++ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
++ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
++ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
++ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
++ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
++ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
++ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
++ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
++ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
++ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
++ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
++ [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
++ [CLK_PLL_DE] = &pll_de_clk.common.hw,
++ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
++ [CLK_CPUX] = &cpux_clk.common.hw,
++ [CLK_AXI] = &axi_clk.common.hw,
++ [CLK_AHB1] = &ahb1_clk.common.hw,
++ [CLK_APB1] = &apb1_clk.common.hw,
++ [CLK_APB2] = &apb2_clk.common.hw,
++ [CLK_AHB2] = &ahb2_clk.common.hw,
++ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
++ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
++ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
++ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
++ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
++ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
++ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
++ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
++ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
++ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
++ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
++ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
++ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
++ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
++ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
++ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
++ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
++ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
++ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
++ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
++ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
++ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
++ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
++ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
++ [CLK_BUS_DE] = &bus_de_clk.common.hw,
++ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
++ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
++ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
++ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
++ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
++ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
++ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
++ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
++ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
++ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
++ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
++ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
++ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
++ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
++ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
++ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
++ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
++ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
++ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
++ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
++ [CLK_THS] = &ths_clk.common.hw,
++ [CLK_NAND] = &nand_clk.common.hw,
++ [CLK_MMC0] = &mmc0_clk.common.hw,
++ [CLK_MMC1] = &mmc1_clk.common.hw,
++ [CLK_MMC2] = &mmc2_clk.common.hw,
++ [CLK_TS] = &ts_clk.common.hw,
++ [CLK_CE] = &ce_clk.common.hw,
++ [CLK_SPI0] = &spi0_clk.common.hw,
++ [CLK_SPI1] = &spi1_clk.common.hw,
++ [CLK_I2S0] = &i2s0_clk.common.hw,
++ [CLK_I2S1] = &i2s1_clk.common.hw,
++ [CLK_I2S2] = &i2s2_clk.common.hw,
++ [CLK_SPDIF] = &spdif_clk.common.hw,
++ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
++ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
++ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
++ [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
++ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
++ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
++ [CLK_DRAM] = &dram_clk.common.hw,
++ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
++ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
++ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
++ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
++ [CLK_DE] = &de_clk.common.hw,
++ [CLK_TCON0] = &tcon0_clk.common.hw,
++ [CLK_TCON1] = &tcon1_clk.common.hw,
++ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
++ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
++ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
++ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
++ [CLK_VE] = &ve_clk.common.hw,
++ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
++ [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw,
++ [CLK_AVS] = &avs_clk.common.hw,
++ [CLK_HDMI] = &hdmi_clk.common.hw,
++ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
++ [CLK_MBUS] = &mbus_clk.common.hw,
++ [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
++ [CLK_GPU] = &gpu_clk.common.hw,
++ },
++ .num = CLK_NUMBER,
++};
++
++static struct ccu_reset_map sun50i_a64_ccu_resets[] = {
++ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
++ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
++ [RST_USB_HSIC] = { 0x0cc, BIT(2) },
++
++ [RST_DRAM] = { 0x0f4, BIT(31) },
++ [RST_MBUS] = { 0x0fc, BIT(31) },
++
++ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
++ [RST_BUS_CE] = { 0x2c0, BIT(5) },
++ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
++ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
++ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
++ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
++ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
++ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
++ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
++ [RST_BUS_TS] = { 0x2c0, BIT(18) },
++ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
++ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
++ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
++ [RST_BUS_OTG] = { 0x2c0, BIT(23) },
++ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
++ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
++ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
++ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
++
++ [RST_BUS_VE] = { 0x2c4, BIT(0) },
++ [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
++ [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
++ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
++ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
++ [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
++ [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
++ [RST_BUS_DE] = { 0x2c4, BIT(12) },
++ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
++ [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
++ [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
++ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
++
++ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
++
++ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
++ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
++ [RST_BUS_THS] = { 0x2d0, BIT(8) },
++ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
++ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
++ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
++
++ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
++ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
++ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
++ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
++ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
++ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
++ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
++ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
++ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
++};
++
++static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
++ .ccu_clks = sun50i_a64_ccu_clks,
++ .num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks),
++
++ .hw_clks = &sun50i_a64_hw_clks,
++
++ .resets = sun50i_a64_ccu_resets,
++ .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
++};
++
++static int sun50i_a64_ccu_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ void __iomem *reg;
++ u32 val;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ reg = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(reg))
++ return PTR_ERR(reg);
++
++ /* Force the PLL-Audio-1x divider to 4 */
++ val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
++ val &= ~GENMASK(19, 16);
++ writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
++
++ writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
++
++ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
++}
++
++static const struct of_device_id sun50i_a64_ccu_ids[] = {
++ { .compatible = "allwinner,sun50i-a64-ccu" },
++ { }
++};
++
++static struct platform_driver sun50i_a64_ccu_driver = {
++ .probe = sun50i_a64_ccu_probe,
++ .driver = {
++ .name = "sun50i-a64-ccu",
++ .of_match_table = sun50i_a64_ccu_ids,
++ },
++};
++builtin_platform_driver(sun50i_a64_ccu_driver);
+--- /dev/null
++++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
+@@ -0,0 +1,72 @@
++/*
++ * Copyright 2016 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _CCU_SUN50I_A64_H_
++#define _CCU_SUN50I_A64_H_
++
++#include <dt-bindings/clock/sun50i-a64-ccu.h>
++#include <dt-bindings/reset/sun50i-a64-ccu.h>
++
++#define CLK_OSC_12M 0
++#define CLK_PLL_CPUX 1
++#define CLK_PLL_AUDIO_BASE 2
++#define CLK_PLL_AUDIO 3
++#define CLK_PLL_AUDIO_2X 4
++#define CLK_PLL_AUDIO_4X 5
++#define CLK_PLL_AUDIO_8X 6
++#define CLK_PLL_VIDEO0 7
++#define CLK_PLL_VIDEO0_2X 8
++#define CLK_PLL_VE 9
++#define CLK_PLL_DDR0 10
++#define CLK_PLL_PERIPH0 11
++#define CLK_PLL_PERIPH0_2X 12
++#define CLK_PLL_PERIPH1 13
++#define CLK_PLL_PERIPH1_2X 14
++#define CLK_PLL_VIDEO1 15
++#define CLK_PLL_GPU 16
++#define CLK_PLL_MIPI 17
++#define CLK_PLL_HSIC 18
++#define CLK_PLL_DE 19
++#define CLK_PLL_DDR1 20
++#define CLK_CPUX 21
++#define CLK_AXI 22
++#define CLK_APB 23
++#define CLK_AHB1 24
++#define CLK_APB1 25
++#define CLK_APB2 26
++#define CLK_AHB2 27
++
++/* All the bus gates are exported */
++
++/* The first bunch of module clocks are exported */
++
++#define CLK_USB_OHCI0_12M 90
++
++#define CLK_USB_OHCI1_12M 92
++
++#define CLK_DRAM 94
++
++/* All the DRAM gates are exported */
++
++/* Some more module clocks are exported */
++
++#define CLK_MBUS 112
++
++/* And the DSI and GPU module clock is exported */
++
++#define CLK_NUMBER (CLK_GPU + 1)
++
++#endif /* _CCU_SUN50I_A64_H_ */
+--- /dev/null
++++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
+@@ -0,0 +1,134 @@
++/*
++ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
++#define _DT_BINDINGS_CLK_SUN50I_A64_H_
++
++#define CLK_BUS_MIPI_DSI 28
++#define CLK_BUS_CE 29
++#define CLK_BUS_DMA 30
++#define CLK_BUS_MMC0 31
++#define CLK_BUS_MMC1 32
++#define CLK_BUS_MMC2 33
++#define CLK_BUS_NAND 34
++#define CLK_BUS_DRAM 35
++#define CLK_BUS_EMAC 36
++#define CLK_BUS_TS 37
++#define CLK_BUS_HSTIMER 38
++#define CLK_BUS_SPI0 39
++#define CLK_BUS_SPI1 40
++#define CLK_BUS_OTG 41
++#define CLK_BUS_EHCI0 42
++#define CLK_BUS_EHCI1 43
++#define CLK_BUS_OHCI0 44
++#define CLK_BUS_OHCI1 45
++#define CLK_BUS_VE 46
++#define CLK_BUS_TCON0 47
++#define CLK_BUS_TCON1 48
++#define CLK_BUS_DEINTERLACE 49
++#define CLK_BUS_CSI 50
++#define CLK_BUS_HDMI 51
++#define CLK_BUS_DE 52
++#define CLK_BUS_GPU 53
++#define CLK_BUS_MSGBOX 54
++#define CLK_BUS_SPINLOCK 55
++#define CLK_BUS_CODEC 56
++#define CLK_BUS_SPDIF 57
++#define CLK_BUS_PIO 58
++#define CLK_BUS_THS 59
++#define CLK_BUS_I2S0 60
++#define CLK_BUS_I2S1 61
++#define CLK_BUS_I2S2 62
++#define CLK_BUS_I2C0 63
++#define CLK_BUS_I2C1 64
++#define CLK_BUS_I2C2 65
++#define CLK_BUS_SCR 66
++#define CLK_BUS_UART0 67
++#define CLK_BUS_UART1 68
++#define CLK_BUS_UART2 69
++#define CLK_BUS_UART3 70
++#define CLK_BUS_UART4 71
++#define CLK_BUS_DBG 72
++#define CLK_THS 73
++#define CLK_NAND 74
++#define CLK_MMC0 75
++#define CLK_MMC1 76
++#define CLK_MMC2 77
++#define CLK_TS 78
++#define CLK_CE 79
++#define CLK_SPI0 80
++#define CLK_SPI1 81
++#define CLK_I2S0 82
++#define CLK_I2S1 83
++#define CLK_I2S2 84
++#define CLK_SPDIF 85
++#define CLK_USB_PHY0 86
++#define CLK_USB_PHY1 87
++#define CLK_USB_HSIC 88
++#define CLK_USB_HSIC_12M 89
++
++#define CLK_USB_OHCI0 91
++
++#define CLK_USB_OHCI1 93
++
++#define CLK_DRAM_VE 95
++#define CLK_DRAM_CSI 96
++#define CLK_DRAM_DEINTERLACE 97
++#define CLK_DRAM_TS 98
++#define CLK_DE 99
++#define CLK_TCON0 100
++#define CLK_TCON1 101
++#define CLK_DEINTERLACE 102
++#define CLK_CSI_MISC 103
++#define CLK_CSI_SCLK 104
++#define CLK_CSI_MCLK 105
++#define CLK_VE 106
++#define CLK_AC_DIG 107
++#define CLK_AC_DIG_4X 108
++#define CLK_AVS 109
++#define CLK_HDMI 110
++#define CLK_HDMI_DDC 111
++
++#define CLK_DSI_DPHY 113
++#define CLK_GPU 114
++
++#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */
+--- /dev/null
++++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
+@@ -0,0 +1,98 @@
++/*
++ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_
++#define _DT_BINDINGS_RST_SUN50I_A64_H_
++
++#define RST_USB_PHY0 0
++#define RST_USB_PHY1 1
++#define RST_USB_HSIC 2
++#define RST_DRAM 3
++#define RST_MBUS 4
++#define RST_BUS_MIPI_DSI 5
++#define RST_BUS_CE 6
++#define RST_BUS_DMA 7
++#define RST_BUS_MMC0 8
++#define RST_BUS_MMC1 9
++#define RST_BUS_MMC2 10
++#define RST_BUS_NAND 11
++#define RST_BUS_DRAM 12
++#define RST_BUS_EMAC 13
++#define RST_BUS_TS 14
++#define RST_BUS_HSTIMER 15
++#define RST_BUS_SPI0 16
++#define RST_BUS_SPI1 17
++#define RST_BUS_OTG 18
++#define RST_BUS_EHCI0 19
++#define RST_BUS_EHCI1 20
++#define RST_BUS_OHCI0 21
++#define RST_BUS_OHCI1 22
++#define RST_BUS_VE 23
++#define RST_BUS_TCON0 24
++#define RST_BUS_TCON1 25
++#define RST_BUS_DEINTERLACE 26
++#define RST_BUS_CSI 27
++#define RST_BUS_HDMI0 28
++#define RST_BUS_HDMI1 29
++#define RST_BUS_DE 30
++#define RST_BUS_GPU 31
++#define RST_BUS_MSGBOX 32
++#define RST_BUS_SPINLOCK 33
++#define RST_BUS_DBG 34
++#define RST_BUS_LVDS 35
++#define RST_BUS_CODEC 36
++#define RST_BUS_SPDIF 37
++#define RST_BUS_THS 38
++#define RST_BUS_I2S0 39
++#define RST_BUS_I2S1 40
++#define RST_BUS_I2S2 41
++#define RST_BUS_I2C0 42
++#define RST_BUS_I2C1 43
++#define RST_BUS_I2C2 44
++#define RST_BUS_SCR 45
++#define RST_BUS_UART0 46
++#define RST_BUS_UART1 47
++#define RST_BUS_UART2 48
++#define RST_BUS_UART3 49
++#define RST_BUS_UART4 50
++
++#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */
projects / openwrt / staging / lynxis.git / blobdiff