adm5120: drop 3.8 and 3.14 support

[openwrt/staging/lynxis/omap.git] / target / linux / adm5120 / files-3.8 / arch / mips / adm5120 / edimax / br-61xx.c

diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c
deleted file mode 100644 (file)
index 62a1cee..0000000
--- a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Edimax BR-61xx support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-#include <prom/admboot.h>
-
-#define BR61XX_CONFIG_OFFSET   0x8000
-#define BR61XX_CONFIG_SIZE             0x1000
-
-#define BR61XX_KEYS_POLL_INTERVAL      20
-#define BR61XX_KEYS_DEBOUNCE_INTERVAL  (3 * BR61XX_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition br61xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN2,
-       }
-};
-
-static u8 br61xx_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init br61xx_mac_setup(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
-                                  BR61XX_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-void __init br61xx_generic_setup(void)
-{
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
-       adm5120_flash0_data.parts = br61xx_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_switch(5, br61xx_vlans);
-
-       adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(br61xx_gpio_buttons),
-                                     br61xx_gpio_buttons);
-
-       br61xx_mac_setup();
-}