cns3xxx: remove linux 4.4 support

[openwrt/staging/lynxis/omap.git] / target / linux / cns3xxx / patches-4.4 / 210-dwc2_defaults.patch

diff --git a/target/linux/cns3xxx/patches-4.4/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-4.4/210-dwc2_defaults.patch
deleted file mode 100644 (file)
index b75d2e4..0000000
--- a/target/linux/cns3xxx/patches-4.4/210-dwc2_defaults.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -144,6 +144,34 @@ static int __dwc2_lowlevel_hw_enable(str
-       return ret;
- }
- 
-+static const struct dwc2_core_params params_cns3xxx = {
-+      .otg_cap                        = 2,    /* non-HNP/non-SRP capable */
-+      .otg_ver                        = 0,    /* 1.3 */
-+      .dma_enable                     = 1,
-+      .dma_desc_enable                = 0,
-+      .speed                          = 0,    /* High Speed */
-+      .enable_dynamic_fifo            = 1,
-+      .en_multiple_tx_fifo            = 1,
-+      .host_rx_fifo_size              = 658,  /* 774 DWORDs */
-+      .host_nperio_tx_fifo_size       = 128,  /* 256 DWORDs */
-+      .host_perio_tx_fifo_size        = 658,  /* 512 DWORDs */
-+      .max_transfer_size              = 65535,
-+      .max_packet_count               = 511,
-+      .host_channels                  = 16,
-+      .phy_type                       = 1,    /* UTMI */
-+      .phy_utmi_width                 = 16,   /* 8 bits */
-+      .phy_ulpi_ddr                   = 0,    /* Single */
-+      .phy_ulpi_ext_vbus              = 0,
-+      .i2c_enable                     = 0,
-+      .ulpi_fs_ls                     = 0,
-+      .host_support_fs_ls_low_power   = 0,
-+      .host_ls_low_power_phy_clk      = 0,    /* 48 MHz */
-+      .ts_dline                       = 0,
-+      .reload_ctl                     = 0,
-+      .ahbcfg                         = 0x10,
-+      .uframe_sched                   = 0,
-+};
-+
- /**
-  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
-  * @hsotg: The driver state
-@@ -344,6 +372,9 @@ static int dwc2_driver_probe(struct plat
-               /* Default all params to autodetect */
-               dwc2_set_all_params(&defparams, -1);
-               params = &defparams;
-+#ifdef CONFIG_ARCH_CNS3XXX
-+              params = &params_cns3xxx;
-+#endif
- 
-               /*
-                * Disable descriptor dma mode by default as the HW can support