mvebu: remove linux 4.4 support

[openwrt/staging/lynxis/omap.git] / target / linux / mvebu / patches-4.4 / 210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch

diff --git a/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch b/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
deleted file mode 100644 (file)
index 9efcff9..0000000
--- a/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 63ff73593c2f5d3fc1cba479321d192caaca48aa Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 12 Sep 2015 18:43:39 +0100
-Subject: [PATCH 738/744] ARM: dts: armada388-clearfog: add SFP module support
-
-Add SFP module support for Clearfog using the SFP phylink support.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog.dts | 44 ++++++++-----------------------
- 1 file changed, 11 insertions(+), 33 deletions(-)
-
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -90,16 +90,12 @@
-                       };
- 
-                       ethernet@34000 {
-+                              managed = "in-band-status";
-                               phy-mode = "sgmii";
-                               buffer-manager = <&bm>;
-                               bm,pool-long = <3>;
-                               bm,pool-short = <1>;
-                               status = "okay";
--
--                              fixed-link {
--                                      speed = <1000>;
--                                      full-duplex;
--                              };
-                       };
- 
-                       i2c@11000 {
-@@ -183,34 +179,6 @@
-                                               output-low;
-                                               line-name = "m.2 devslp";
-                                       };
--                                      sfp_los {
--                                              /* SFP loss of signal */
--                                              gpio-hog;
--                                              gpios = <12 GPIO_ACTIVE_HIGH>;
--                                              input;
--                                              line-name = "sfp-los";
--                                      };
--                                      sfp_tx_fault {
--                                              /* SFP laser fault */
--                                              gpio-hog;
--                                              gpios = <13 GPIO_ACTIVE_HIGH>;
--                                              input;
--                                              line-name = "sfp-tx-fault";
--                                      };
--                                      sfp_tx_disable {
--                                              /* SFP transmit disable */
--                                              gpio-hog;
--                                              gpios = <14 GPIO_ACTIVE_HIGH>;
--                                              output-low;
--                                              line-name = "sfp-tx-disable";
--                                      };
--                                      sfp_mod_def0 {
--                                              /* SFP module present */
--                                              gpio-hog;
--                                              gpios = <15 GPIO_ACTIVE_LOW>;
--                                              input;
--                                              line-name = "sfp-mod-def0";
--                                      };
-                               };
- 
-                               /* The MCP3021 is 100kHz clock only */
-@@ -374,6 +342,16 @@
-               };
-       };
- 
-+      sfp: sfp {
-+              compatible = "sff,sfp";
-+              i2c-bus = <&i2c1>;
-+              los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-+              moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-+              sfp,ethernet = <&eth2>;
-+              tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-+              tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-+      };
-+
-       dsa@0 {
-               compatible = "marvell,dsa";
-               dsa,ethernet = <&eth1>;