X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Flynxis%2Fomap.git;a=blobdiff_plain;f=target%2Flinux%2Fapm821xx%2Fpatches-4.4%2F300-fix-atheros-nics-on-apm82181.patch;fp=target%2Flinux%2Fapm821xx%2Fpatches-4.4%2F300-fix-atheros-nics-on-apm82181.patch;h=0000000000000000000000000000000000000000;hp=0b1affcfe7529354154433b8b5ef1b15906a21d2;hb=cead8f9dfd8395577c6274e34fd592bcf76afe1c;hpb=51397d7d95d9f5e210a5557f65de1fa21e6f5921

diff --git a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 0b1affcfe7..0000000000
--- a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/sysdev/ppc4xx_pci.c
-+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
-@@ -1066,15 +1066,24 @@ static int __init apm821xx_pciex_init_po
- 	u32 val;
- 
- 	/*
--	 * Do a software reset on PCIe ports.
--	 * This code is to fix the issue that pci drivers doesn't re-assign
--	 * bus number for PCIE devices after Uboot
--	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
--	 * PT quad port, SAS LSI 1064E)
-+	 * Only reset the PHY when no link is currently established.
-+	 * This is for the Atheros PCIe board which has problems to establish
-+	 * the link (again) after this PHY reset. All other currently tested
-+	 * PCIe boards don't show this problem.
- 	 */
--
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
--	mdelay(10);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		/*
-+		 * Do a software reset on PCIe ports.
-+		 * This code is to fix the issue that pci drivers doesn't re-assign
-+		 * bus number for PCIE devices after Uboot
-+		 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+		 * PT quad port, SAS LSI 1064E)
-+		 */
-+
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+		mdelay(10);
-+	}
- 
- 	if (port->endpoint)
- 		val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1091,9 +1100,12 @@ static int __init apm821xx_pciex_init_po
- 	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- 	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
- 
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
--	mdelay(50);
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+		mdelay(50);
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	}
- 
- 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- 		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |