#include / { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,xway", "lantiq,ase"; aliases { serial0 = &asc1; }; chosen { stdout-path = "serial0:115200n8"; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "mips,mips4Kc"; reg = <0>; }; }; reboot { compatible = "syscon-reboot"; regmap = <&rcu0>; offset = <0x10>; mask = <0x40000000>; }; biu@1f800000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,biu", "simple-bus"; reg = <0x1f800000 0x800000>; ranges = <0x0 0x1f800000 0x7fffff>; icu0: icu@80200 { #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; reg = <0x80200 0x28 0x80228 0x28 0x80250 0x28 0x80278 0x28 0x802a0 0x28>; }; watchdog@803f0 { compatible = "lantiq,wdt"; reg = <0x803f0 0x10>; }; }; sram@1f000000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,sram", "simple-bus"; reg = <0x1f000000 0x800000>; ranges = <0x0 0x1f000000 0x7fffff>; eiu0: eiu@101000 { #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,eiu-xway"; reg = <0x101000 0x1000>; interrupt-parent = <&icu0>; lantiq,eiu-irqs = <29 30 31>; }; pmu0: pmu@102000 { compatible = "lantiq,pmu-xway"; reg = <0x102000 0x1000>; }; cgu0: cgu@103000 { compatible = "lantiq,cgu-xway"; reg = <0x103000 0x1000>; #clock-cells = <1>; }; rcu0: rcu@203000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,ase-rcu", "simple-mfd", "syscon"; reg = <0x203000 0x1000>; ranges = <0x0 0x203000 0x100>; big-endian; reset: reset-controller@10 { compatible = "lantiq,danube-reset"; reg = <0x10 4>, <0x14 4>; #reset-cells = <2>; }; usb_phy: usb2-phy@18 { compatible = "lantiq,ase-usb2-phy"; reg = <0x18 4>; status = "disabled"; resets = <&reset 4 4>; reset-names = "ctrl"; #phy-cells = <0>; }; }; }; fpi@10000000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,fpi", "simple-bus"; ranges = <0x0 0x10000000 0xeefffff>; reg = <0x10000000 0xef00000>; localbus: localbus@0 { #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ 1 0 0x4000000 0x4000010>; /* addsel1 */ compatible = "lantiq,localbus", "simple-bus"; }; spi: spi@e100800 { compatible = "lantiq,ase-spi"; reg = <0xe100800 0x100>; interrupt-parent = <&icu0>; interrupts = <24 25 26>; interrupt-names = "spi_rx", "spi_tx", "spi_err", "spi_frm"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; status = "disabled"; }; gptu@e100a00 { compatible = "lantiq,gptu-xway"; reg = <0xe100a00 0x100>; interrupt-parent = <&icu0>; interrupts = <33 34 35 36 37 38>; }; gpio: pinmux@e100b10 { compatible = "lantiq,ase-pinctrl"; #gpio-cells = <2>; gpio-controller; reg = <0xe100b10 0xa0>; asc_pins: asc-pins { mux { lantiq,groups = "asc"; lantiq,function = "asc"; }; }; mdio_pins: mdio { mux { lantiq,groups = "mdio"; lantiq,function = "mdio"; }; }; spi_pins: spi { mux-0 { lantiq,groups = "spi_di"; lantiq,function = "spi"; }; mux-1 { lantiq,groups = "spi_do", "spi_clk"; lantiq,function = "spi"; lantiq,output = <1>; }; }; spi_cs4_pins: spi-cs4 { mux { lantiq,groups = "spi_cs4"; lantiq,function = "spi"; lantiq,output = <1>; }; }; }; asc1: serial@e100c00 { compatible = "lantiq,asc"; reg = <0xe100c00 0x400>; interrupt-parent = <&icu0>; interrupts = <72 74 75>; pinctrl-0 = <&asc_pins>; pinctrl-names = "default"; }; mei@e116000 { compatible = "lantiq,mei-xway"; reg = <0xe116000 0x400>; interrupt-parent = <&icu0>; interrupts = <81>; }; usb: usb@e101000 { compatible = "lantiq,ase-usb"; reg = <0xe101000 0x1000 0xe120000 0x3f000>; interrupt-parent = <&icu0>; interrupts = <39>; dr_mode = "host"; phys = <&usb_phy>; phy-names = "usb2-phy"; status = "disabled"; }; dma0: dma@e104100 { compatible = "lantiq,dma-xway"; reg = <0xe104100 0x800>; }; ebu0: ebu@e105300 { compatible = "lantiq,ebu-xway"; reg = <0xe105300 0x100>; }; ppe@e234000 { compatible = "lantiq,ppe-ase"; reg = <0xe234000 0x40000>; interrupt-parent = <&icu0>; interrupts = <85>; }; gsw: etop@e180000 { compatible = "lantiq,etop-xway"; reg = <0xe180000 0x40000>; interrupt-parent = <&icu0>; interrupts = <105 109>; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; }; }; adsl { compatible = "lantiq,adsl-ase"; }; };