--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
+ model = "BT OpenReach VDSL Modem";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_red: power2 {
+ label = "vg3503j:red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "vg3503j:green:dsl";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power {
+ label = "vg3503j:green:power";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
+ <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
+
+ interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ lantiq,switch;
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x20000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "uboot-env";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+};