lantiq: copy target to kernel 5.4

[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.19 / arch / mips / boot / dts / lantiq / vr9_arcadyan_vgv7510kw22.dtsi

diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
new file mode 100644 (file)
index 0000000..8db1ffb
--- /dev/null
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
@@ -0,0 +1,258 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+               led-upgrade = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &internet_green;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl: dsl {
+                       label = "vgv7510kw22:green:dsl";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+
+               internet_red {
+                       label = "vgv7510kw22:red:internet";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+
+               info_red {
+                       label = "vgv7510kw22:red:info";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               power_green: power {
+                       label = "vgv7510kw22:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+
+               info_green {
+                       label = "vgv7510kw22:green:info";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               internet_green: internet_green {
+                       label = "vgv7510kw22:green:internet";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi: wifi {
+                       label = "vgv7510kw22:green:wlan";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+
+               power_red: power2 {
+                       label = "vgv7510kw22:red:power";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+               };
+
+               phone {
+                       label = "vgv7510kw22:green:telefon";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       pinctrl-0 = <&mdio_pins>,
+                   <&gphy0_led0_pins>, <&gphy0_led1_pins>,
+                   <&gphy1_led0_pins>, <&gphy1_led1_pins>;
+       pinctrl-names = "default";
+
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+       };
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci-rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       flash@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       boardconfig: partition@fe0000 {
+                               label = "board_config";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
+&pcie0 {
+       status = "disabled";
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+};