lantiq: copy target to kernel 5.4
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / ar9_avm_fritz7320.dts
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
new file mode 100644 (file)
index 0000000..424b778
--- /dev/null
@@ -0,0 +1,151 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
+       model = "AVM FRITZ!Box 7320";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+
+               led-dsl = &info_green;
+               led-wifi = &wlan;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               dect {
+                       label = "dect";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_PHONE>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "fritz7320:green:power";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               voice {
+                       label = "fritz7320:green:fon";
+                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+               };
+               dect {
+                       label = "fritz7320:green:dect";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+               };
+               wlan: wlan {
+                       label = "fritz7320:green:wlan";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+               };
+               info_green: info_green {
+                       label = "fritz7320:green:info";
+                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+               };
+               info_red {
+                       label = "fritz7320:red:info";
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&ath9k_cal 0xa91>;
+       mtd-mac-address-increment = <(-2)>;
+};
+
+&localbus {
+       flash@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       ath9k_cal: partition@0 {
+                               label = "urlader";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0xf60000>;
+                       };
+
+                       partition@f80000 {
+                               label = "tffs (1)";
+                               reg = <0xf80000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "tffs (2)";
+                               reg = <0xfc0000 0x40000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+
+       pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+                   <&pci_gnt3_pins>, <&pci_gnt4_pins>,
+                   <&pci_req1_pins>, <&pci_req2_pins>,
+                   <&pci_req3_pins>, <&pci_req4_pins>;
+
+       req-mask = <0xf>;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};