lantiq: copy target to kernel 5.4

[openwrt/staging/mkresin.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / falcon_lantiq_easy98000.dtsi

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi
new file mode 100644 (file)
index 0000000..5821c51
--- /dev/null
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi
@@ -0,0 +1,110 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+
+/ {
+       compatible = "lantiq,easy98000", "lantiq,falcon";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bootled_pins>;
+
+               LED_0 {
+                       label = "easy98000:green:gpon";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_1 {
+                       label = "easy98000:red:gpon";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_2 {
+                       label = "easy98000:green:gpon_tx";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_3 {
+                       label = "easy98000:green:gpon_rx";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_4 {
+                       label = "easy98000:green:voice";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_5 {
+                       label = "easy98000:green:status";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+};
+
+&ebu_cs1 {
+       eth0: ethernet@3 {
+               compatible = "davicom,dm9000";
+               device_type = "network";
+               reg = <0x0000003 0x1>, <0x0000001 0x1>;
+               reg-names = "addr", "data";
+               interrupt-parent = <&gpio1>;
+               #interrupt-cells = <2>;
+               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+               local-mac-address = [ 00 00 00 00 00 00 ];
+       };
+
+       cpld@3c00000 {
+               compatible = "lantiq,easy98000_addon";
+               reg = <0x3c00000 0x2>;
+       };
+
+       cpld@3c0000c {
+               compatible = "lantiq,easy98000_cpld_led";
+               reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
+       };
+};
+
+/* // enable this for second uart:
+&serial1 {
+       status = "okay";
+};*/
+
+&spi {
+       status = "okay";
+
+       eeprom@2 {
+               compatible = "atmel,at25", "atmel,at25160n";
+               reg = <2>;
+               spi-max-frequency = <1000000>;
+               spi-cpha;
+               spi-cpol;
+
+               pagesize = <32>;
+               size = <2048>;
+               address-width = <16>;
+       };
+};
+
+&i2c {
+       status = "okay";
+
+       clock-frequency = <100000>;
+
+       /* eeprom-emulation by OMU */
+       eeprom@50 {
+               compatible = "at,24c02";
+               reg = <0x50>;
+       };
+       eeprom@51 {
+               compatible = "at,24c02";
+               reg = <0x51>;
+       };
+};