--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
+ model = "Buffalo WBMR-300HPD";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_g;
+ led-failsafe = &diag_r;
+ led-running = &power_g;
+ led-upgrade = &power_g;
+
+ led-dsl = &dsl;
+ led-internet = &router_g;
+ led-wifi = &wifi_g;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ diag_r: diag_r {
+ label = "wbmr300:red:diag";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default_state = "off";
+ };
+
+ wifi_g: wifi_g {
+ label = "wbmr300:green:wifi";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ dsl: dsl {
+ label = "dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_y: router_y {
+ label = "wbmr300:yellow:router";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_y: wifi_y {
+ label = "wbmr300:yellow:wifi";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1: lan1 {
+ label = "wbmr300:green:lan1";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan: wan {
+ label = "wbmr300:green:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan3: lan3 {
+ label = "wbmr300:green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2: lan2 {
+ label = "wbmr300:green:lan2";
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_g: internet_g {
+ label = "wbmr300:green:internet";
+ gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_y: internet_y {
+ label = "wbmr300:yellow:internet";
+ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_g: router_g {
+ label = "wbmr300:green:router";
+ gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_g: power_g {
+ label = "wbmr300:green:power";
+ gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x10000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x10000 0x10000>;
+ label = "gphyfirmware";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x80000>;
+ label = "dsl_fw";
+ };
+
+ partition@de0000 {
+ reg = <0xa0000 0xf40000>;
+ label = "firmware";
+ };
+
+ partition@fe0000 {
+ reg = <0xfe0000 0x10000>;
+ label = "sysconfig";
+ read-only;
+ };
+
+ partition@ff0000 {
+ reg = <0xff0000 0x2000>;
+ label = "ubootconfig";
+ };
+
+ partition@ff3000 {
+ reg = <0xff3000 0x2000>;
+ label = "board_config";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
projects / openwrt / staging / mkresin.git / blobdiff