lantiq: copy target to kernel 5.4

[openwrt/staging/mkresin.git] / target / linux / lantiq / files / arch / mips / boot / dts / lantiq / falcon_lantiq_easy98000.dtsi

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi
deleted file mode 100644 (file)
index 5821c51..0000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-
-/ {
-       compatible = "lantiq,easy98000", "lantiq,falcon";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bootled_pins>;
-
-               LED_0 {
-                       label = "easy98000:green:gpon";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_1 {
-                       label = "easy98000:red:gpon";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_2 {
-                       label = "easy98000:green:gpon_tx";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_3 {
-                       label = "easy98000:green:gpon_rx";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_4 {
-                       label = "easy98000:green:voice";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_5 {
-                       label = "easy98000:green:status";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};
-
-&ebu_cs1 {
-       eth0: ethernet@3 {
-               compatible = "davicom,dm9000";
-               device_type = "network";
-               reg = <0x0000003 0x1>, <0x0000001 0x1>;
-               reg-names = "addr", "data";
-               interrupt-parent = <&gpio1>;
-               #interrupt-cells = <2>;
-               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-               local-mac-address = [ 00 00 00 00 00 00 ];
-       };
-
-       cpld@3c00000 {
-               compatible = "lantiq,easy98000_addon";
-               reg = <0x3c00000 0x2>;
-       };
-
-       cpld@3c0000c {
-               compatible = "lantiq,easy98000_cpld_led";
-               reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
-       };
-};
-
-/* // enable this for second uart:
-&serial1 {
-       status = "okay";
-};*/
-
-&spi {
-       status = "okay";
-
-       eeprom@2 {
-               compatible = "atmel,at25", "atmel,at25160n";
-               reg = <2>;
-               spi-max-frequency = <1000000>;
-               spi-cpha;
-               spi-cpol;
-
-               pagesize = <32>;
-               size = <2048>;
-               address-width = <16>;
-       };
-};
-
-&i2c {
-       status = "okay";
-
-       clock-frequency = <100000>;
-
-       /* eeprom-emulation by OMU */
-       eeprom@50 {
-               compatible = "at,24c02";
-               reg = <0x50>;
-       };
-       eeprom@51 {
-               compatible = "at,24c02";
-               reg = <0x51>;
-       };
-};