+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
- model = "BT OpenReach VDSL Modem";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_red: power2 {
- label = "vg3503j:red:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "vg3503j:green:dsl";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- power_green: power {
- label = "vg3503j:green:power";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
- <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- lantiq,switch;
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x20000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- partition@7f0000 {
- label = "uboot-env";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-};