lantiq: copy target to kernel 5.4

[openwrt/staging/mkresin.git] / target / linux / lantiq / files / arch / mips / boot / dts / lantiq / vr9_zyxel_p-2812hnu-f1.dts

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts
deleted file mode 100644 (file)
index 4d7aac3..0000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/dts-v1/;
-
-#include "vr9_zyxel_p-2812hnu-fx.dtsi"
-
-/ {
-       compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-       model = "ZyXEL P-2812HNU-F1";
-
-       aliases {
-               led-usb = &led_usb1;
-               led-usb2 = &led_usb2;
-       };
-
-       leds {
-               led_usb1: usb1 {
-                       label = "p2812hnuf1:green:usb1";
-                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-               };
-               led_usb2: usb2 {
-                       label = "p2812hnuf1:green:usb2";
-                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&localbus {
-       flash@0 {
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-
-               pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
-               pinctrl-names = "default";
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                       };
-                       partition@40000 {
-                               label = "uboot-env";
-                               reg = <0x40000 0x20000>;
-                       };
-                       partition@60000 {
-                               label = "kernel";
-                               reg = <0x60000 0x300000>;
-                       };
-                       partition@360000 {
-                               label = "ubi";
-                               reg = <0x360000 0x7ca0000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       wifi@1814,3062 {
-               compatible = "pci1814,3062";
-               reg = <0x7000 0 0 0 0>;
-               ralink,eeprom = "RT3062.eeprom";
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};