lantiq: add Linux 5.4 support as testing kernel version
[openwrt/staging/mkresin.git] / target / linux / lantiq / patches-5.4 / 0028-NET-lantiq-various-etop-fixes.patch
index a336af8a3c29e13f61e8860618dbee414c9275ca..094496a16de4c94efd25e81289db17ab509b62f4 100644 (file)
@@ -10,16 +10,16 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -11,7 +11,7 @@
-  *   You should have received a copy of the GNU General Public License
-  *   along with this program; if not, see <http://www.gnu.org/licenses/>.
+@@ -1,7 +1,7 @@
+ // SPDX-License-Identifier: GPL-2.0-only
+ /*
   *
 - *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
 + *   Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
   */
  
  #include <linux/kernel.h>
-@@ -30,11 +30,16 @@
+@@ -20,11 +20,16 @@
  #include <linux/mm.h>
  #include <linux/platform_device.h>
  #include <linux/ethtool.h>
@@ -36,7 +36,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <asm/checksum.h>
  
-@@ -42,7 +47,7 @@
+@@ -32,7 +37,7 @@
  #include <xway_dma.h>
  #include <lantiq_platform.h>
  
@@ -45,7 +45,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #define MDIO_REQUEST          0x80000000
  #define MDIO_READ             0x40000000
  #define MDIO_ADDR_MASK                0x1f
-@@ -51,44 +56,91 @@
+@@ -41,44 +46,91 @@
  #define MDIO_REG_OFFSET               0x10
  #define MDIO_VAL_MASK         0xffff
  
@@ -152,7 +152,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        struct net_device *netdev;
        struct napi_struct napi;
        struct ltq_dma_channel dma;
-@@ -98,23 +150,36 @@ struct ltq_etop_chan {
+@@ -88,23 +140,36 @@ struct ltq_etop_chan {
  struct ltq_etop_priv {
        struct net_device *netdev;
        struct platform_device *pdev;
@@ -194,7 +194,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        if (!ch->skb[ch->dma.desc])
                return -ENOMEM;
        ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
-@@ -149,8 +214,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
+@@ -139,8 +204,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
        spin_unlock_irqrestore(&priv->lock, flags);
  
        skb_put(skb, len);
@@ -206,7 +206,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  }
  
  static int
-@@ -158,7 +226,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -148,7 +216,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
  {
        struct ltq_etop_chan *ch = container_of(napi,
                                struct ltq_etop_chan, napi);
@@ -216,7 +216,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        while (work_done < budget) {
                struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -170,7 +240,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -160,7 +230,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
        }
        if (work_done < budget) {
                napi_complete_done(&ch->napi, work_done);
@@ -226,7 +226,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        }
        return work_done;
  }
-@@ -182,12 +254,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -172,12 +244,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
                container_of(napi, struct ltq_etop_chan, napi);
        struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
        struct netdev_queue *txq =
@@ -242,7 +242,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
                dev_kfree_skb_any(ch->skb[ch->tx_free]);
                ch->skb[ch->tx_free] = NULL;
                memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -200,7 +274,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -190,7 +264,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
        if (netif_tx_queue_stopped(txq))
                netif_tx_start_queue(txq);
        napi_complete(&ch->napi);
@@ -252,7 +252,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return 1;
  }
  
-@@ -208,9 +284,10 @@ static irqreturn_t
+@@ -198,9 +274,10 @@ static irqreturn_t
  ltq_etop_dma_irq(int irq, void *_priv)
  {
        struct ltq_etop_priv *priv = _priv;
@@ -266,7 +266,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return IRQ_HANDLED;
  }
  
-@@ -222,7 +299,7 @@ ltq_etop_free_channel(struct net_device
+@@ -212,7 +289,7 @@ ltq_etop_free_channel(struct net_device
        ltq_dma_free(&ch->dma);
        if (ch->dma.irq)
                free_irq(ch->dma.irq, priv);
@@ -275,7 +275,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
                int desc;
                for (desc = 0; desc < LTQ_DESC_NUM; desc++)
                        dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -233,66 +310,135 @@ static void
+@@ -223,66 +300,135 @@ static void
  ltq_etop_hw_exit(struct net_device *dev)
  {
        struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -331,10 +331,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        struct ltq_etop_priv *priv = netdev_priv(dev);
 -      int i;
 +      int mii_mode = priv->mii_mode;
-+
-+      clk_enable(priv->clk_ppe);
  
 -      ltq_pmu_enable(PMU_PPE);
++      clk_enable(priv->clk_ppe);
+-      switch (priv->pldata->mii_mode) {
 +      if (of_machine_is_compatible("lantiq,ar9")) {
 +              ltq_etop_gbit_init(dev);
 +              /* force the etops link to the gbit to MII */
@@ -343,8 +344,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
 +      ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
 +                      MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
--      switch (priv->pldata->mii_mode) {
++
 +      switch (mii_mode) {
        case PHY_INTERFACE_MODE_RMII:
 -              ltq_etop_w32_mask(ETOP_MII_MASK,
@@ -446,7 +446,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  }
  
  static void
-@@ -311,6 +457,39 @@ static const struct ethtool_ops ltq_etop
+@@ -301,6 +447,39 @@ static const struct ethtool_ops ltq_etop
  };
  
  static int
@@ -486,7 +486,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
  {
        u32 val = MDIO_REQUEST |
-@@ -318,9 +497,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
+@@ -308,9 +487,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
                ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
                phy_data;
  
@@ -498,7 +498,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return 0;
  }
  
-@@ -331,12 +510,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
+@@ -321,12 +500,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
                ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
                ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
  
@@ -515,17 +515,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return val;
  }
  
-@@ -351,8 +530,18 @@ ltq_etop_mdio_probe(struct net_device *d
- {
+@@ -342,7 +521,10 @@ ltq_etop_mdio_probe(struct net_device *d
        struct ltq_etop_priv *priv = netdev_priv(dev);
        struct phy_device *phydev;
-+      u32 phy_supported =  (SUPPORTED_10baseT_Half
-+                      | SUPPORTED_10baseT_Full
-+                      | SUPPORTED_100baseT_Half
-+                      | SUPPORTED_100baseT_Full
-+                      | SUPPORTED_Autoneg
-+                      | SUPPORTED_MII
-+                      | SUPPORTED_TP);
  
 -      phydev = phy_find_first(priv->mii_bus);
 +      if (of_machine_is_compatible("lantiq,ase"))
@@ -535,7 +527,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        if (!phydev) {
                netdev_err(dev, "no PHY found\n");
-@@ -360,21 +549,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -350,14 +532,17 @@ ltq_etop_mdio_probe(struct net_device *d
        }
  
        phydev = phy_connect(dev, phydev_name(phydev),
@@ -547,22 +539,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
                return PTR_ERR(phydev);
        }
  
--      phydev->supported &= (SUPPORTED_10baseT_Half
--                            | SUPPORTED_10baseT_Full
--                            | SUPPORTED_100baseT_Half
--                            | SUPPORTED_100baseT_Full
--                            | SUPPORTED_Autoneg
--                            | SUPPORTED_MII
--                            | SUPPORTED_TP);
+-      phy_set_max_speed(phydev, SPEED_100);
 +      if (of_machine_is_compatible("lantiq,ar9"))
-+              phy_supported |= SUPPORTED_1000baseT_Half
-+                      | SUPPORTED_1000baseT_Full;
++              phy_set_max_speed(phydev, SPEED_1000);
++      else
++              phy_set_max_speed(phydev, SPEED_100);
  
-+      phydev->supported &= phy_supported;
-       phydev->advertising = phydev->supported;
        phy_attached_info(phydev);
  
-@@ -395,8 +581,13 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -378,8 +563,13 @@ ltq_etop_mdio_init(struct net_device *de
        }
  
        priv->mii_bus->priv = dev;
@@ -578,7 +563,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        priv->mii_bus->name = "ltq_mii";
        snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
                priv->pdev->name, priv->pdev->id);
-@@ -433,17 +624,19 @@ static int
+@@ -416,18 +606,21 @@ static int
  ltq_etop_open(struct net_device *dev)
  {
        struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -592,7 +577,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +      spin_lock_irqsave(&priv->lock, flags);
 +      ltq_dma_open(&priv->txch.dma);
++      ltq_dma_enable_irq(&priv->txch.dma);
 +      ltq_dma_open(&priv->rxch.dma);
++      ltq_dma_enable_irq(&priv->rxch.dma);
 +      spin_unlock_irqrestore(&priv->lock, flags);
 +
 +      if (dev->phydev)
@@ -601,13 +588,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 -              if (!IS_TX(i) && (!IS_RX(i)))
 -                      continue;
 -              ltq_dma_open(&ch->dma);
+-              ltq_dma_enable_irq(&ch->dma);
 -              napi_enable(&ch->napi);
 -      }
 -      phy_start(dev->phydev);
        netif_tx_start_all_queues(dev);
        return 0;
  }
-@@ -452,18 +645,19 @@ static int
+@@ -436,18 +629,19 @@ static int
  ltq_etop_stop(struct net_device *dev)
  {
        struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -637,7 +625,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return 0;
  }
  
-@@ -473,16 +667,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -457,16 +651,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
        int queue = skb_get_queue_mapping(skb);
        struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
        struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -659,7 +647,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
                netdev_err(dev, "tx ring full\n");
                netif_tx_stop_queue(txq);
                return NETDEV_TX_BUSY;
-@@ -490,7 +684,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -474,7 +668,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
  
        /* dma needs to start on a 16 byte aligned address */
        byte_offset = CPHYSADDR(skb->data) % 16;
@@ -668,7 +656,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        netif_trans_update(dev);
  
-@@ -500,11 +694,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -484,11 +678,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
        wmb();
        desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
                LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@@ -683,7 +671,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
                netif_tx_stop_queue(txq);
  
        return NETDEV_TX_OK;
-@@ -515,11 +709,14 @@ ltq_etop_change_mtu(struct net_device *d
+@@ -499,11 +693,14 @@ ltq_etop_change_mtu(struct net_device *d
  {
        struct ltq_etop_priv *priv = netdev_priv(dev);
        unsigned long flags;
@@ -699,7 +687,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        spin_unlock_irqrestore(&priv->lock, flags);
  
        return 0;
-@@ -579,6 +776,9 @@ ltq_etop_init(struct net_device *dev)
+@@ -563,6 +760,9 @@ ltq_etop_init(struct net_device *dev)
        if (err)
                goto err_hw;
        ltq_etop_change_mtu(dev, 1500);
@@ -709,7 +697,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
        if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -596,9 +796,10 @@ ltq_etop_init(struct net_device *dev)
+@@ -580,9 +780,10 @@ ltq_etop_init(struct net_device *dev)
                dev->addr_assign_type = NET_ADDR_RANDOM;
  
        ltq_etop_set_multicast_list(dev);
@@ -723,7 +711,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        return 0;
  
  err_netdev:
-@@ -618,6 +819,9 @@ ltq_etop_tx_timeout(struct net_device *d
+@@ -602,6 +803,9 @@ ltq_etop_tx_timeout(struct net_device *d
        err = ltq_etop_hw_init(dev);
        if (err)
                goto err_hw;
@@ -733,7 +721,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        netif_trans_update(dev);
        netif_wake_queue(dev);
        return;
-@@ -641,14 +845,19 @@ static const struct net_device_ops ltq_e
+@@ -625,14 +829,19 @@ static const struct net_device_ops ltq_e
        .ndo_tx_timeout = ltq_etop_tx_timeout,
  };
  
@@ -757,7 +745,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
-@@ -674,31 +883,62 @@ ltq_etop_probe(struct platform_device *p
+@@ -658,31 +867,62 @@ ltq_etop_probe(struct platform_device *p
                goto err_out;
        }
  
@@ -835,7 +823,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        err = register_netdev(dev);
        if (err)
-@@ -727,31 +967,22 @@ ltq_etop_remove(struct platform_device *
+@@ -711,31 +951,22 @@ ltq_etop_remove(struct platform_device *
        return 0;
  }