lantiq: copy target to kernel 5.4
[openwrt/staging/mkresin.git] / target / linux / lantiq / patches-5.4 / 0151-lantiq-ifxmips_pcie-use-of.patch
diff --git a/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch
new file mode 100644 (file)
index 0000000..b081871
--- /dev/null
@@ -0,0 +1,191 @@
+--- a/arch/mips/pci/ifxmips_pcie.c
++++ b/arch/mips/pci/ifxmips_pcie.c
+@@ -18,6 +18,9 @@
+ #include <linux/pci_regs.h>
+ #include <linux/module.h>
++#include <linux/of_gpio.h>
++#include <linux/of_platform.h>
++
+ #include "ifxmips_pcie.h"
+ #include "ifxmips_pcie_reg.h"
+@@ -40,6 +43,7 @@
+ static DEFINE_SPINLOCK(ifx_pcie_lock);
+ u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++static int pcie_reset_gpio;
+ static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
+     {
+@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ...
+       printk("%s", buf);
+ }
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++      gpio_direction_output(pcie_reset_gpio, 1);
++      gpio_set_value(pcie_reset_gpio, 1);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++      gpio_set_value(pcie_reset_gpio, 0);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++      mdelay(100);
++      gpio_direction_output(pcie_reset_gpio, 1);
++}
+ static inline int pcie_ltssm_enable(int pcie_port)
+ {
+@@ -1045,17 +1065,52 @@ pcie_rc_initialize(int pcie_port)
+       return 0;
+ }
+-static int __init ifx_pcie_bios_init(void)
++static int ifx_pcie_bios_probe(struct platform_device *pdev)
+ {
++    struct device_node *node = pdev->dev.of_node;
+     void __iomem *io_map_base;
+     int pcie_port;
+     int startup_port;
++    struct device_node *np;
++    struct pci_bus *bus;
++
++    /*
++     * In case a PCI device is physical present, the Lantiq PCI driver need
++     * to be loaded prior to the Lantiq PCIe driver. Otherwise none of them
++     * will work.
++     *
++     * In case the lantiq PCI driver is enabled in the device tree, check if
++     * a PCI bus (hopefully the one of the Lantiq PCI driver one) is already
++     * registered.
++     *
++     * It will fail if there is another PCI controller, this controller is
++     * registered before the Lantiq PCIe driver is probe and the lantiq PCI
++     */
++    np = of_find_compatible_node(NULL, NULL, "lantiq,pci-xway");
++
++    if (of_device_is_available(np)) {
++        bus = pci_find_next_bus(bus);
++
++        if (!bus)
++           return -EPROBE_DEFER;
++    }
++
+     /* Enable AHB Master/ Slave */
+     pcie_ahb_pmu_setup();
+     startup_port = IFX_PCIE_PORT0;
+-    
++
++    pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
++    if (gpio_is_valid(pcie_reset_gpio)) {
++        int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset");
++        if (ret) {
++            dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio);
++            return ret;
++        }
++        gpio_direction_output(pcie_reset_gpio, 1);
++    }
++
+     for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
+       if (pcie_rc_initialize(pcie_port) == 0) {
+           IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
+@@ -1067,6 +1122,7 @@ static int __init ifx_pcie_bios_init(voi
+                 return -ENOMEM;
+             }
+             ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
++            pci_load_of_ranges(&ifx_pcie_controller[pcie_port].pcic, node);
+             register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
+             /* XXX, clear error status */
+@@ -1083,6 +1139,30 @@ static int __init ifx_pcie_bios_init(voi
+     return 0;
+ }
++
++static const struct of_device_id ifxmips_pcie_match[] = {
++        { .compatible = "lantiq,pcie-xrx200" },
++        {},
++};
++MODULE_DEVICE_TABLE(of, ifxmips_pcie_match);
++
++static struct platform_driver ltq_pci_driver = {
++        .probe = ifx_pcie_bios_probe,
++        .driver = {
++                .name = "pcie-xrx200",
++                .owner = THIS_MODULE,
++                .of_match_table = ifxmips_pcie_match,
++        },
++};
++
++int __init ifx_pcie_bios_init(void)
++{
++        int ret = platform_driver_register(&ltq_pci_driver);
++        if (ret)
++                pr_info("pcie-xrx200: Error registering platform driver!");
++        return ret;
++}
++
+ arch_initcall(ifx_pcie_bios_init);
+ MODULE_LICENSE("GPL");
+--- a/arch/mips/pci/ifxmips_pcie_vr9.h
++++ b/arch/mips/pci/ifxmips_pcie_vr9.h
+@@ -22,8 +22,6 @@
+ #include <linux/gpio.h>
+ #include <lantiq_soc.h>
+-#define IFX_PCIE_GPIO_RESET  494
+-
+ #define IFX_REG_R32    ltq_r32
+ #define IFX_REG_W32    ltq_w32
+ #define CONFIG_IFX_PCIE_HW_SWAP
+@@ -53,21 +51,6 @@
+ #define OUT                   ((volatile u32*)(IFX_GPIO + 0x0070))
+-static inline void pcie_ep_gpio_rst_init(int pcie_port)
+-{
+-
+-      gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
+-      gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
+-      gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
+-
+-/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
+-}
+-
+ static inline void pcie_ahb_pmu_setup(void) 
+ {
+       /* Enable AHB bus master/slave */
+@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert
+     IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+ }
+-static inline void pcie_device_rst_assert(int pcie_port)
+-{
+-      gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
+-//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-}
+-
+-static inline void pcie_device_rst_deassert(int pcie_port)
+-{
+-    mdelay(100);
+-      gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
+-//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
+-    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-}
+-
+ static inline void pcie_core_pmu_setup(int pcie_port)
+ {
+       struct clk *clk;