ramips: Add support for ZTE ZXECS EBG3130 aka BDCOM WAP2100-SK

[openwrt/staging/mkresin.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 6d9b28f2c5e68bbaa3ff2ecabf9d7009738a7e4b..6d5db45c50490552581f39be7c953dc1eae6e9ae 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -49,14 +49,17 @@ ramips_setup_interfaces()
        dcs-930|\
        dcs-930l-b1|\
        ht-tm02|\
+       kimax,u35wf|\
        linkits7688 | \
        m2m|\
        microwrt|\
+       mikrotik,rbm11g|\
        mpr-a2|\
        ncs601w|\
        omega2 | \
        omega2p | \
        timecloud|\
+       tplink,tl-wa801nd-v5|\
        w150m|\
        widora,neo-16m|\
        widora,neo-32m|\
@@ -82,6 +85,7 @@ ramips_setup_interfaces()
        dir-320-b1|\
        dir-610-a1|\
        dir-615-h1|\
+       dir-810l|\
        dlink,dwr-116-a1|\
        dlink,dwr-921-c1|\
        ew1200|\
@@ -100,6 +104,7 @@ ramips_setup_interfaces()
        mzk-750dhp|\
        mzk-w300nh2|\
        d-team,newifi-d2|\
+       netgear,r6120|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
@@ -145,6 +150,7 @@ ramips_setup_interfaces()
        pbr-d1|\
        ravpower,wd03|\
        tama,w06|\
+       tplink,tl-mr3020-v3|\
        u25awf-h1|\
        wli-tx4-ag300n|\
        wmdr-143n|\
@@ -153,6 +159,10 @@ ramips_setup_interfaces()
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
+       dlink,dwr-118-a2)
+               ucidef_add_switch "switch0" \
+                       "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
+               ;;
        mir3g)
                ucidef_add_switch "switch0" \
                        "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
@@ -190,12 +200,11 @@ ramips_setup_interfaces()
        awm002-evb-8M|\
        c20i|\
        dir-645|\
-       f5d8235-v2|\
        gl-mt300a|\
        gl-mt300n|\
        gl-mt750|\
        hg255d|\
-       iodata,wn-gx300gr|\
+       hiwifi,hc5861b|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
@@ -214,11 +223,13 @@ ramips_setup_interfaces()
        ubnt-erx|\
        ubnt-erx-sfp|\
        ur-326n4g|\
+       wap2100-sk|\
        wrtnode|\
        wrtnode2p | \
        wrtnode2r | \
        youhua,wr1200js|\
-       zbt-wa05)
+       zbt-wa05|\
+       zyxel,keenetic-extra-ii)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
@@ -228,7 +239,11 @@ ramips_setup_interfaces()
                        "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
                ;;
        dir-860l-b1|\
-       elecom,wrc-1167ghbk2-s)
+       elecom,wrc-1167ghbk2-s|\
+       elecom,wrc-2533gst|\
+       elecom,wrc-1900gst|\
+       iodata,wn-ax1167gr|\
+       iodata,wn-gx300gr)
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
@@ -276,6 +291,11 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       edimax,br-6478ac-v2|\
+       tplink,c2-v1)
+               ucidef_add_switch "switch1" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        hc5*61|\
        y1s)
                ucidef_add_switch "switch0" \
@@ -309,6 +329,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
                ;;
+       phicomm,k2g)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
+               ;;
        re350-v1)
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
@@ -321,6 +345,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
                ;;
+       skw92a)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        tew-638apb-v2)
                ucidef_add_switch "switch0" \
                        "4:lan" "6@eth0"
@@ -347,6 +375,7 @@ ramips_setup_interfaces()
                        "0:lan" "2:lan" "6t@eth0"
                ;;
        f5d8235-v1|\
+       f5d8235-v2|\
        tew-714tru|\
        v11st-fe|\
        wzr-agl300nh)
@@ -368,7 +397,7 @@ ramips_setup_interfaces()
                ;;
        wizfi630a)
                ucidef_add_switch "switch0" \
-                       "1:lan" "2:lan" "0:wan" "6@eth0"
+                       "0:lan" "1:lan" "2:wan" "6@eth0"
                ;;
        wt3020-4M|\
        wt3020-8M)
@@ -445,6 +474,7 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
                ;;
        dlink,dwr-116-a1|\
+       dlink,dwr-118-a2|\
        dlink,dwr-921-c1)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -452,7 +482,13 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       edimax,br-6478ac-v2)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               wan_mac=$(macaddr_add "$lan_mac" 2)
+               ;;
        elecom,wrc-1167ghbk2-s|\
+       elecom,wrc-2533gst|\
+       elecom,wrc-1900gst|\
        sk-wb8)
                wan_mac=$(mtd_get_mac_binary factory 57350)
                ;;
@@ -462,11 +498,13 @@ ramips_setup_macs()
                ;;
        hc5*61|\
        hc5661a|\
-       hc5962)
+       hc5962|\
+       hiwifi,hc5861b)
                lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
                ;;
@@ -507,7 +545,8 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(mtd_get_mac_binary factory 46)
                ;;
-       oy-0001)
+       oy-0001|\
+       phicomm,k2g)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
@@ -520,6 +559,10 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(mtd_get_mac_binary factory 32772)
                ;;
+       skw92a)
+               lan_mac=$(mtd_get_mac_binary factory 40)
+               wan_mac=$(mtd_get_mac_binary factory 46)
+               ;;
        tew-691gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
                ;;