/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "AR670W", "ralink,rt2880-soc";
+ compatible = "airlink101,ar670w", "ralink,rt2880-soc";
model = "Airlink101 AR670W";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "uartlite";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x2004>;
-
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "mii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
- };
- };
-
- wmac@480000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x2000>;
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- u-boot@0 {
- reg = <0x0 0x30000>;
- label = "u-boot";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- factory: factory@30000 {
- reg = <0x30000 0x10000>;
- label = "factory";
- read-only;
- };
+ partition@0 {
+ reg = <0x0 0x30000>;
+ label = "u-boot";
+ read-only;
+ };
- firmware@40000 {
- reg = <0x40000 0x3c0000>;
- label = "firmware";
+ factory: partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "lzma";
+ reg = <0x40000 0x3c0000>;
+ label = "firmware";
+ };
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
- status {
+ led_power: power {
label = "ar670w:green:power";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wpsblue {
label = "ar670w:blue:wps";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
- gpio-keys-polled {
+ keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
- gpios = <&gpio0 9 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "uartlite";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x2004>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x2000>;
+};