ramips/mt7621: Name DTS files based on scheme

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / Newifi-D1.dts

diff --git a/target/linux/ramips/dts/Newifi-D1.dts b/target/linux/ramips/dts/Newifi-D1.dts
deleted file mode 100644 (file)
index 2c18058..0000000
--- a/target/linux/ramips/dts/Newifi-D1.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
-       model = "Newifi-D1";
-
-       aliases {
-               led-boot = &led_blue;
-               led-failsafe = &led_blue;
-               led-running = &led_blue;
-               led-upgrade = &led_blue;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x10000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               status-red {
-                       label = "newifi-d1:red:status";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-               };
-
-               status-green {
-                       label = "newifi-d1:green:status";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-               };
-
-               led_blue: status-blue {
-                       label = "newifi-d1:blue:status";
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               usb2power {
-                       gpio-export,name = "usb2power";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb3power {
-                       gpio-export,name = "usb3power";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&sdhci {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "mx25l25635f", "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x1fb0000>;
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&pcie1 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
-                       ralink,function = "gpio";
-               };
-       };
-};