ramips: Added Onion Omega2 and Omega2+

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / OMEGA2.dtsi

diff --git a/target/linux/ramips/dts/OMEGA2.dtsi b/target/linux/ramips/dts/OMEGA2.dtsi
new file mode 100644 (file)
index 0000000..7914834
--- /dev/null
+++ b/target/linux/ramips/dts/OMEGA2.dtsi
@@ -0,0 +1,174 @@
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "onion,omega", "mediatek,mt7628an-soc";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               system_led: system {
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "gpio";
+                       ralink,function = "gpio";
+               };
+
+               perst {
+                       ralink,group = "perst";
+                       ralink,function = "gpio";
+               };
+
+               refclk {
+                       ralink,group = "refclk";
+                       ralink,function = "gpio";
+               };
+
+               i2s {
+                       ralink,group = "i2s";
+                       ralink,function = "gpio";
+               };
+
+               spis {
+                       ralink,group = "spis";
+                       ralink,function = "gpio";
+               };
+
+               wled_kn {
+                       ralink,group = "wled_kn";
+                       ralink,function = "gpio";
+               };
+
+               wled_an {
+                       ralink,group = "wled_an";
+                       ralink,function = "gpio";
+               };
+
+               wdt {
+                       ralink,group = "wdt";
+                       ralink,function = "gpio";
+               };
+
+               pwm0 {
+                       ralink,group = "pwm0";
+                       ralink,function = "gpio";
+               };
+
+               pwm1 {
+                       ralink,group = "pwm1";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+               m25p,chunked-io = <31>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               firmware: partition@50000 {
+                       label = "firmware";
+               };
+       };
+
+       spidev@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "linux,spidev";
+               reg = <1>;
+               spi-max-frequency = <40000000>;
+       };
+};
+
+&i2c {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&pwm {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+       status = "okay";
+       mediatek,cd-low;
+};
+
+&wmac {
+       status = "okay";
+};