ramips: add support for ipTIME A6004NS-M
[openwrt/staging/mkresin.git] / target / linux / ramips / dts / mt7621_iptime_a6ns-m.dts
index b3efe557e255b914dc1e7064e58a6e4312dcbf95..f83340e64a4091da320b3b627fb91ec32f39986a 100644 (file)
@@ -1,183 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_iptime_a6004ns-m.dtsi"
 
 / {
        compatible = "iptime,a6ns-m", "mediatek,mt7621-soc";
        model = "ipTIME A6ns-M";
-
-       aliases {
-               led-boot = &led_cpu;
-               led-failsafe = &led_cpu;
-               led-running = &led_cpu;
-               led-upgrade = &led_cpu;
-               label-mac-device = &gmac0;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb {
-                       label = "blue:usb";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&xhci_ehci_port1>;
-                       linux,default-trigger = "usbport";
-               };
-
-               wlan5g {
-                       label = "blue:wlan5g";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0radio";
-               };
-
-               wlan2g {
-                       label = "blue:wlan2g";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1radio";
-               };
-
-               led_cpu: cpu {
-                       label = "blue:cpu";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <80000000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "config";
-                               reg = <0x20000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@30000 {
-                               label = "factory";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x40000 0xfc0000>;
-                       };
-               };
-       };
-};
-
-&state_default {
-       gpio {
-               groups = "i2c", "uart3", "jtag", "wdt";
-               function = "gpio";
-       };
-};
-
-&gmac0 {
-       nvmem-cells = <&macaddr_uboot_1fc20>;
-       nvmem-cell-names = "mac-address";
-};
-
-&switch0 {
-       ports {
-               port@0 {
-                       status = "okay";
-                       label = "wan";
-                       nvmem-cells = <&macaddr_uboot_1fc40>;
-                       nvmem-cell-names = "mac-address";
-               };
-
-               port@1 {
-                       status = "okay";
-                       label = "lan1";
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan3";
-               };
-
-               port@4 {
-                       status = "okay";
-                       label = "lan4";
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&pcie1 {
-       wifi@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <2400000 2500000>;
-       };
-};
-
-&uboot {
-       compatible = "nvmem-cells";
-       #address-cells = <1>;
-       #size-cells = <1>;
-
-       macaddr_uboot_1fc20: macaddr@1fc20 {
-               reg = <0x1fc20 0x6>;
-       };
-
-       macaddr_uboot_1fc40: macaddr@1fc40 {
-               reg = <0x1fc40 0x6>;
-       };
 };