X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fmkresin.git;a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Ffiles-4.19%2Farch%2Fmips%2Fboot%2Fdts%2Flantiq%2Fvr9_alphanetworks_asl56026.dts;fp=target%2Flinux%2Flantiq%2Ffiles-4.19%2Farch%2Fmips%2Fboot%2Fdts%2Flantiq%2Fvr9_alphanetworks_asl56026.dts;h=3d10f582b01fcbdb0e08d09f6778883f21d6425c;hp=0000000000000000000000000000000000000000;hb=333b796c04d313cac56043b91461f083b71f8b45;hpb=154443754950578d6acfaf829f3c970b66e77cad

diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
new file mode 100644
index 0000000000..3d10f582b0
--- /dev/null
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
@@ -0,0 +1,155 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+	compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
+	model = "BT OpenReach VDSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+
+		led-dsl = &dsl;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		dsl: dsl {
+			label = "asl56026:green:dsl";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		/* power-* is a bicolour led */
+		power_green: power_green {
+			label = "asl56026:green:power";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		power_red: power_red {
+			label = "asl56026:red:power";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		power_led_blink {
+			gpio-export,name = "power_led_blink";
+			gpio-export,output = <0>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <3>;
+			phy-mode = "mii";
+			phy-handle = <&phy14>;
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy14: ethernet-phy@14 {
+			reg = <0x14>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&gphy0 {
+	lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+	lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&localbus {
+	flash@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x0800000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@30000 {
+				label = "uboot_env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "firmware";
+				reg = <0x40000 0x750000>;
+			};
+
+			partition@790000 {
+				label = "ddrconfig";
+				reg = <0x790000 0x70000>;
+				read-only;
+			};
+		};
+	};
+};