From 4891b865380e2b7f32acf0893df9c1ca9db8d4ea Mon Sep 17 00:00:00 2001 From: Clemens Hopfer Date: Thu, 22 Jul 2021 17:54:15 +0200 Subject: [PATCH] ramips: add support for YunCore AX820/HWAP-AX820 There are two versions which are identical apart from the enclosure: YunCore AX820: indoor ceiling mount AP with integrated antennas YunCore HWAP-AX820: outdoor enclosure with external (N) connectors Hardware specs: SoC: MediaTek MT7621DAT Flash: 16 MiB SPI NOR RAM: 128MiB (DDR3, integrated) WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN) LED: Status (green) Button: Reset Power: 802.11af/at PoE; DC 12V,1A Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external Flash instructions: The "OpenWRT support" version of the AX820 comes with a LEDE-based firmware with proprietary MTK drivers and a luci webinterface and ssh accessible under 192.168.1.1 on LAN; user root, no password. The sysupgrade.bin can be flashed using luci or sysupgrade via ssh, you will have to force the upgrade due to a different factory name. Remember: Do *not* preserve factory configuration! MAC addresses as used by OEM firmware: use address source 2g 44:D1:FA:*:0b Factory 0x0004 (label) 5g 46:D1:FA:*:0b LAA of 2g lan 44:D1:FA:*:0c Factory 0xe000 wan 44:D1:FA:*:0d Factory 0xe000 + 1 The wan MAC can also be found in 0xe006 but is not used by OEM dtb. Due to different MAC handling in mt76 the LAA derived from lan is used for 2g to prevent duplicate MACs when creating multiple interfaces. Signed-off-by: Clemens Hopfer --- package/boot/uboot-envtools/files/ramips | 3 +- .../linux/ramips/dts/mt7621_yuncore_ax820.dts | 145 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 9 ++ .../mt7621/base-files/etc/board.d/02_network | 4 + .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 + 5 files changed, 164 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/mt7621_yuncore_ax820.dts diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 92118a6319..d97c812881 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -23,7 +23,8 @@ sitecom,wlr-4100-v1-002) ;; allnet,all0256n-4m|\ allnet,all0256n-8m|\ -allnet,all5002) +allnet,all5002|\ +yuncore,ax820) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; ampedwireless,ally-00x19k|\ diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts new file mode 100644 index 0000000000..fe0e9daf7f --- /dev/null +++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "yuncore,ax820", "mediatek,mt7621-soc"; + model = "YunCore AX820"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_green; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <200>; + always-running; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "Config"; + reg = <0x30000 0x10000>; + read-only; + }; + + /* range 0x40000 to 0x50000 is empty in vendor + * firmware, so we do not use it either + */ + + factory: partition@50000 { + label = "Factory"; + reg = <0x50000 0x40000>; + read-only; + }; + + partition@90000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x90000 0xf70000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; + + port@1 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "wdt"; + function = "gpio"; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index e15c1ec3a8..2543bde372 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1956,6 +1956,15 @@ define Device/youku_yk-l2 endef TARGET_DEVICES += youku_yk-l2 +define Device/yuncore_ax820 + $(Device/dsa-migration) + IMAGE_SIZE := 15808k + DEVICE_VENDOR := YunCore + DEVICE_MODEL := AX820 + DEVICE_PACKAGES := kmod-mt7915e +endef +TARGET_DEVICES += yuncore_ax820 + define Device/zbtlink_zbt-we1326 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 1a914d8614..8e89ccacba 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -89,6 +89,7 @@ ramips_setup_interfaces() ubnt,usw-flex) ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5" ;; + yuncore,ax820|\ zyxel,nr7101) ucidef_set_interfaces_lan_wan "lan" "wan" ;; @@ -194,6 +195,9 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac) label_mac=$lan_mac ;; + yuncore,ax820) + label_mac=$(mtd_get_mac_binary Factory 0x4) + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 625d6a616b..61285182d2 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -86,4 +86,8 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress ;; + yuncore,ax820) + [ "$PHYNBR" = "1" ] && \ + macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress + ;; esac -- 2.30.2