ipq40xx: add Cisco Meraki MR33 Support

[openwrt/staging/stintel.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index bc64d5b8ab00ef18c6f4531fe7fbd3ad9f89af7c..4322c4f3fafb509d241670e8a3ed29032d8f72dc 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,21 @@
 #!/bin/sh
 
+# xor multiple hex values of the same length
+xor() {
+       local val
+       local ret="0x$1"
+       local retlen=${#1}
+
+       shift
+       while [ -n "$1" ]; do
+               val="0x$1"
+               ret=$((ret ^ val))
+               shift
+       done
+
+       printf "%0${retlen}x" "$ret"
+}
+
 ath10kcal_die() {
        echo "ath10cal: " "$*"
        exit 1
@@ -37,6 +53,45 @@ ath10kcal_ubi_extract() {
                ath10kcal_die "failed to extract from $ubi"
 }
 
+ath10kcal_patch_mac() {
+       local mac=$1
+
+       [ -z "$mac" ] && return
+
+       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+}
+
+ath10kcal_patch_mac_crc() {
+       local mac=$1
+       local mac_offset=6
+       local chksum_offset=2
+       local xor_mac
+       local xor_fw_mac
+       local xor_fw_chksum
+
+       xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+       xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+       ath10kcal_patch_mac "$mac" && {
+               xor_mac=${mac//:/}
+               xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+               xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+               xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+               printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+                       dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+       }
+}
+
+ath10kcal_is_caldata_valid() {
+       local expected="$1"
+
+       magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
+       [[ "$magic" == "$expected" ]]
+       return $?
+}
+
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
 . /lib/functions.sh
@@ -46,6 +101,15 @@ board=$(board_name)
 
 
 case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+       case "$board" in
+       meraki,mr33)
+               ath10kcal_ubi_extract "ART" 36864 2116
+               ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
+               ath10kcal_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
+               ;;
+       esac
+       ;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
        asus,rt-ac58u)
@@ -59,6 +123,11 @@ case "$FIRMWARE" in
        qcom,ap-dk01.1-c1)
                ath10kcal_extract "ART" 4096 12064
                ;;
+       meraki,mr33)
+               ath10kcal_ubi_extract "ART" 4096 12064
+               ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
+               ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
+               ;;
        openmesh,a42)
                ath10kcal_extract "0:ART" 4096 12064
                ;;
@@ -77,6 +146,11 @@ case "$FIRMWARE" in
        qcom,ap-dk01.1-c1)
                ath10kcal_extract "ART" 20480 12064
                ;;
+       meraki,mr33)
+               ath10kcal_ubi_extract "ART" 20480 12064
+               ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
+               ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
+               ;;
        openmesh,a42)
                ath10kcal_extract "0:ART" 20480 12064
                ;;