ipq40xx: add target

[openwrt/staging/stintel.git] / target / linux / ipq40xx / patches-4.14 / 701-dts-ipq4019-add-mdio-node.patch

diff --git a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
new file mode 100644 (file)
index 0000000..112c921
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
@@ -0,0 +1,52 @@
+From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 01:10:33 +0100
+Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
+
+This patch adds the mdio device-tree node.
+This is where the switch is connected to, so it's needed
+for the ethernet interfaces.
+
+Note: The driver isn't anywhere close to be upstream,
+so the info might change.
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -539,6 +539,34 @@
+                       status = "disabled";
+               };
+ 
++              mdio@90000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "qcom,ipq4019-mdio";
++                      reg = <0x90000 0x64>;
++                      status = "disabled";
++
++                      ethernet-phy@0 {
++                              reg = <0>;
++                      };
++
++                      ethernet-phy@1 {
++                              reg = <1>;
++                      };
++
++                      ethernet-phy@2 {
++                              reg = <2>;
++                      };
++
++                      ethernet-phy@3 {
++                              reg = <3>;
++                      };
++
++                      ethernet-phy@4 {
++                              reg = <4>;
++                      };
++              };
++
+               usb3_ss_phy: ssphy@9a000 {
+                       compatible = "qca,uni-ssphy";
+                       reg = <0x9a000 0x800>;