apm821xx: unify My Book Live Single + Duo images

[openwrt/staging/thess.git] / target / linux / apm821xx / dts / apollo3g.dtsi

diff --git a/target/linux/apm821xx/dts/apollo3g.dtsi b/target/linux/apm821xx/dts/apollo3g.dtsi
deleted file mode 100644 (file)
index e88973f..0000000
--- a/target/linux/apm821xx/dts/apollo3g.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "apm82181.dtsi"
-
-/ {
-       compatible = "amcc,apollo3g";
-
-       aliases {
-               serial0 = &UART0;
-               led-boot = &status;
-               led-failsafe = &status;
-               led-running = &status;
-               led-upgrade = &status;
-       };
-};
-
-&POB0 {
-       ebc {
-               nor_flash@0,0 {
-                       status = "okay";
-                       compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
-                       bank-width = <1>;
-                       reg = <0x00000000 0x00000000 0x00080000>;
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               /* Part of bootrom - Don't use it without a jump */
-                               label = "free";
-                               reg = <0x00000000 0x0001e000>;
-                       };
-
-                       partition@1 {
-                               label = "env";
-                               reg = <0x0001e000 0x00002000>;
-                       };
-
-                       partition@2 {
-                               label = "uboot";
-                               reg = <0x00020000 0x00050000>;
-                       };
-               };
-       };
-
-       GPIO1: gpio1@e0000000 {
-               compatible = "wd,mbl-gpio", "ti,74273";
-               reg-names = "dat";
-               reg = <0xe0000000 0x1>;
-               #gpio-cells = <2>;
-               gpio-controller;
-
-               enable-phy {
-                       /* toggle to reset EMAC PHY */
-                       gpio-hog;
-                       line-name = "enable EMAC PHY";
-                       gpios = <0 GPIO_ACTIVE_LOW>;
-                       output-low;
-               };
-
-               enable-button {
-                       /* Defined in u-boot as: NOT_NOR
-                        * "enables features other than NOR
-                        * specifically, the buffer at CS2"
-                        * (button).
-                        *
-                        * Note: This option is disabled as
-                        * it prevents the system from being
-                        * rebooted successfully.
-                        */
-
-                       gpio-hog;
-                       line-name = "Enable Reset Button, disable NOR";
-                       gpios = <1 GPIO_ACTIVE_HIGH>;
-                       output-low;
-               };
-
-               enable-usb {
-                       gpio-hog;
-                       line-name = "Power USB Core";
-                       gpios = <2 GPIO_ACTIVE_LOW>;
-                       output-low;
-                       status = "disabled";
-               };
-
-               enable-port1 {
-                       gpio-hog;
-                       line-name = "Power Drive Port 1";
-                       gpios = <3 GPIO_ACTIVE_LOW>;
-                       output-low;
-               };
-
-               enable-port0 {
-                       gpio-hog;
-                       line-name = "Power Drive Port 0";
-                       gpios = <7 GPIO_ACTIVE_LOW>;
-                       output-low;
-                       status = "disabled";
-               };
-       };
-
-       GPIO2: gpio2@e0100000 {
-               compatible = "wd,mbl-gpio", "ti,74244";
-               reg-names = "dat";
-               reg = <0xe0100000 0x1>;
-               #gpio-cells = <2>;
-               gpio-controller;
-               no-output;
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               failsafe: power-red {
-                       label = "mbl:red:power";
-                       gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "panic";
-               };
-
-               status: power-green {
-                       label = "mbl:green:power";
-                       gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               power-blue {
-                       label = "mbl:blue:power";
-                       gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       gpio_keys_polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <60>;   /* 3 * 20 = 60ms */
-               autorepeat;
-
-               button@1 {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&CRYPTO {
-       status = "okay";
-};
-
-&PKA {
-       status = "okay";
-};
-
-&TRNG {
-       status = "okay";
-};
-
-&SATA1 {
-       status = "okay";
-};
-
-&UART0 {
-       status = "okay";
-};
-
-&EMAC0 {
-       status = "okay";
-
-       phy-map = <0x2>;
-       phy-address = <0x1>;
-       phy-handle = <&phy>;
-
-       mdio {
-               phy: phy@1 {
-                       compatible = "ethernet-phy-ieee802.3-c22";
-                       reg = <1>;
-               };
-       };
-};
-
-&SATA1 {
-       status = "okay";
-};