uboot-ar71xx: switch to using u-boot.mk

[openwrt/staging/wigyori.git] / package / boot / uboot-ar71xx / files / board / zyxel / nbg460n / nbg460n.c

diff --git a/package/boot/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c b/package/boot/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c
deleted file mode 100644 (file)
index 03a479d..0000000
--- a/package/boot/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/reboot.h>
-#include <asm/ar71xx.h>
-#include <asm/ar71xx_gpio.h>
-
-#define NBG460N_WAN_LED                        19
-
-phys_size_t initdram(int board_type)
-{
-    return (32*1024*1024);
-}
-
-int checkboard(void)
-{
-       // Set pin 19 to 1, to stop WAN LED blinking
-    ar71xx_setpindir(NBG460N_WAN_LED, 1);
-    ar71xx_setpin(NBG460N_WAN_LED, 1);
-
-    printf("U-boot on Zyxel NBG460N\n");
-    return 0;
-}
-
-void _machine_restart(void)
-{
-       for (;;) {
-               writel((RESET_MODULE_FULL_CHIP | RESET_MODULE_DDR),
-                       KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
-        readl(KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
-       }
-}
-
-int board_eth_init(bd_t *bis)
-{
-    char *phynames[] = {RTL8366_DEVNAME, RTL8366_DEVNAME};
-    u16 phyids[] = {RTL8366_LANPHY_ID, RTL8366_WANPHY_ID};
-    u16 phyfixed[] = {1, 0};
-
-    if (ag71xx_register(bis, phynames, phyids, phyfixed) <= 0)
-        return -1;
-
-       if (rtl8366s_initialize())
-        return -1;
-
-    if (rtl8366_mii_register(bis))
-        return -1;
-               
-    return 0;
-}
-
-int misc_init_r(void) {
-    uint8_t macaddr[6];
-    uint8_t enetaddr[6];
-
-       debug("Testing mac addresses\n");
-       
-    memcpy(macaddr, (uint8_t *) CONFIG_ETHADDR_ADDR, 6);
-
-    if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-        debug("Setting eth0 mac addr to %pM\n", macaddr);
-        eth_setenv_enetaddr("ethaddr", macaddr);
-    }
-
-    if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
-               macaddr[5] += 1;
-        debug("Setting eth1 mac addr to %pM\n", macaddr);
-        eth_setenv_enetaddr("eth1addr", macaddr);
-    }
-
-    return 0;
-}