+++ /dev/null
-/*
- * DomyWifi DW33D support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/version.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DW33D_GPIO_LED_MMC 4
-#define DW33D_GPIO_LED_WLAN_2G 13
-#define DW33D_GPIO_LED_STATUS 14
-#define DW33D_GPIO_LED_USB 15
-#define DW33D_GPIO_LED_INTERNET 22
-
-#define DW33D_GPIO_BTN_RESET 17
-
-#define DW33D_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DW33D_KEYS_DEBOUNCE_INTERVAL (3 * DW33D_KEYS_POLL_INTERVAL)
-
-#define DW33D_MAC0_OFFSET 0
-#define DW33D_MAC1_OFFSET 6
-#define DW33D_WMAC_OFFSET 12
-#define DW33D_WMAC_CALDATA_OFFSET 0x1000
-#define DW33D_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dw33d_leds_gpio[] __initdata = {
- {
- .name = "dw33d:blue:status",
- .gpio = DW33D_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:mmc",
- .gpio = DW33D_GPIO_LED_MMC,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:usb",
- .gpio = DW33D_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:wlan-2g",
- .gpio = DW33D_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:internet",
- .gpio = DW33D_GPIO_LED_INTERNET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dw33d_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DW33D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DW33D_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-/* GMAC6 of the QCA8337 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg dw33d_qca8337_pad6_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC0 of the QCA8337 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg dw33d_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data dw33d_qca8337_data = {
- .pad0_cfg = &dw33d_qca8337_pad0_cfg,
- .pad6_cfg = &dw33d_qca8337_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dw33d_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dw33d_qca8337_data,
- },
-};
-
-static void __init dw33d_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dw33d_leds_gpio),
- dw33d_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DW33D_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dw33d_gpio_keys),
- dw33d_gpio_keys);
-
- ath79_register_usb();
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
- ath79_register_pci();
-
- ath79_register_wmac(art + DW33D_WMAC_CALDATA_OFFSET, art + DW33D_WMAC_OFFSET);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + DW33D_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + DW33D_MAC1_OFFSET, 0);
-
- mdiobus_register_board_info(dw33d_mdio0_info,
- ARRAY_SIZE(dw33d_mdio0_info));
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected tot eh SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DOMYWIFI_DW33D, "DW33D",
- "DomyWifi DW33D",
- dw33d_setup);
projects / openwrt / staging / wigyori.git / blobdiff