+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,qca9557";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips74Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar9557-ddr-controller",
- "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns16550a";
- reg = <0x18020000 0x20>;
-
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_REF>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- usb_phy0: usb-phy0@18030000 {
- compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
- reg = <0x18030000 4>, <0x18030004 4>;
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_phy1: usb-phy1@18030010 {
- compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
- reg = <0x18030010 4>, <0x18030014 4>;
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst2 4>, <&rst2 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar9557-gpio",
- "qca,ar9340-gpio";
- reg = <0x18040000 0x28>;
-
- interrupts = <2>;
- ngpios = <24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pinmux: pinmux@1804002c {
- compatible = "pinctrl-single";
-
- reg = <0x1804002c 0x44>;
-
- #size-cells = <0>;
-
- pinctrl-single,bit-per-mux;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x1>;
- #pinctrl-cells = <2>;
-
- jtag_disable_pins: pinmux_jtag_disable_pins {
- pinctrl-single,bits = <0x40 0x2 0x2>;
- };
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar9557-pll",
- "qca,qca9550-pll", "syscon";
- reg = <0x18050000 0x50>;
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
-
- clocks = <&extosc>;
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,qca9550-reset",
- "qca,ar7100-reset";
- reg = <0x1806001c 0x4>;
-
- #reset-cells = <1>;
- interrupt-parent = <&cpuintc>;
-
- intc2: interrupt-controller2 {
- compatible = "qca,ar9340-intc";
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qca,int-status-addr = <0xac>;
- qca,pending-bits = <0xf>, /* wmac */
- <0x1f0>; /* pcie rc 0 */
- };
-
- intc3: interrupt-controller3 {
- compatible = "qca,ar9340-intc";
-
- interrupt-parent = <&cpuintc>;
- interrupts = <3>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qca,int-status-addr = <0xac>;
- qca,pending-bits = <0x1f000>, /* pcie rc 1 */
- <0x1000000>, /* usb1 */
- <0x10000000>; /* usb2 */
- };
- };
-
- rst2: reset-controller@180600c0 {
- compatible = "qca,qca9550-reset",
- "qca,ar7100-reset",
- "simple-bus";
- reg = <0x180600c0 0x4>;
-
- #reset-cells = <1>;
- };
- };
-
- nand: nand@1b800200 {
- compatible = "qca,ar934x-nand";
- reg = <0x1b800200 0xb8>;
-
- interrupts = <21>;
- interrupt-parent = <&miscintc>;
-
- resets = <&rst 14>;
- reset-names = "nand";
-
- nand-ecc-mode = "hw";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "disabled";
- };
-
- gmac: gmac@18070000 {
- compatible = "qca,qca9550-gmac";
- reg = <0x18070000 0x58>;
- };
-
- pcie0: pcie-controller@180c0000 {
- compatible = "qcom,qca9550-pci", "qcom,ar7240-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x180c0000 0x1000>, /* CRP */
- <0x180f0000 0x100>, /* CTRL */
- <0x14000000 0x1000>; /* CFG */
- reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x02000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
- interrupt-parent = <&intc2>;
- interrupts = <1>;
-
- resets = <&rst 6>, <&rst 7>;
- reset-names = "hc", "phy";
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie0 0>;
- status = "disabled";
- };
-
- wmac: wmac@18100000 {
- compatible = "qca,qca9550-wmac";
- reg = <0x18100000 0x10000>;
-
- interrupt-parent = <&intc2>;
- interrupts = <0>;
-
- status = "disabled";
- };
-
- pcie1: pcie-controller@18250000 {
- compatible = "qcom,qca9550-pci", "qcom,ar7240-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x18250000 0x1000>, /* CRP */
- <0x18280000 0x100>, /* CTRL */
- <0x16000000 0x1000>; /* CFG */
- reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000001 0 0x000001>; /* io space */
- interrupt-parent = <&intc3>;
- interrupts = <0>;
-
- resets = <&rst2 6>, <&rst2 7>;
- reset-names = "hc", "phy";
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie1 0>;
- status = "disabled";
- };
-
- usb0: usb@1b000000 {
- compatible = "generic-ehci";
- reg = <0x1b000000 0x1fc>;
-
- interrupt-parent = <&intc3>;
- interrupts = <1>;
- resets = <&rst 5>;
- reset-names = "usb-host";
-
- has-transaction-translator;
- caps-offset = <0x100>;
-
- phy-names = "usb-phy0";
- phys = <&usb_phy0>;
-
- status = "disabled";
- };
-
- usb1: usb@1b400000 {
- compatible = "generic-ehci";
- reg = <0x1b400000 0x1fc>;
-
- interrupt-parent = <&intc3>;
- interrupts = <2>;
- resets = <&rst2 5>;
- reset-names = "usb-host";
-
- has-transaction-translator;
- caps-offset = <0x100>;
-
- phy-names = "usb-phy1";
- phys = <&usb_phy1>;
-
- status = "disabled";
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar934x-spi";
- reg = <0x1f000000 0x1c>;
-
- clocks = <&pll ATH79_CLK_AHB>;
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&mdio0 {
- compatible = "qca,ar9340-mdio";
-};
-
-ð0 {
- compatible = "qca,qca9550-eth", "syscon";
-
- pll-reg = <0 0x28 0>;
- pll-handle = <&pll>;
-
- pll-data = <0x16000000 0x00000101 0x00001616>;
- phy-mode = "rgmii";
-
- resets = <&rst 9>, <&rst 22>;
- reset-names = "mac", "mdio";
-};
-
-&mdio1 {
- compatible = "qca,ar9340-mdio";
-};
-
-ð1 {
- compatible = "qca,qca9550-eth", "syscon";
-
- pll-reg = <0 0x48 0>;
- pll-handle = <&pll>;
-
- pll-data = <0x16000000 0x00000101 0x00001616>;
- phy-mode = "sgmii";
-
- resets = <&rst 13>, <&rst 23>;
- reset-names = "mac", "mdio";
-};
projects / openwrt / staging / wigyori.git / blobdiff