kirkwood: remove support for kernel 4.14

[openwrt/staging/wigyori.git] / target / linux / kirkwood / patches-4.14 / 105-ea4500.patch

diff --git a/target/linux/kirkwood/patches-4.14/105-ea4500.patch b/target/linux/kirkwood/patches-4.14/105-ea4500.patch
deleted file mode 100644 (file)
index cfa499c..0000000
--- a/target/linux/kirkwood/patches-4.14/105-ea4500.patch
+++ /dev/null
@@ -1,144 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -26,6 +26,10 @@
-       };
- 
-       aliases {
-+              led-boot = &led_white_health;
-+              led-failsafe = &led_white_health;
-+              led-running = &led_white_health;
-+              led-upgrade = &led_white_health;
-               serial0 = &uart0;
-       };
- 
-@@ -58,9 +62,10 @@
-               pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-               pinctrl-names = "default";
- 
--              white-health {
-+              led_white_health: white-health {
-                       label = "viper:white:health";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+                      default-state = "on";
-               };
- 
-               white-pulse {
-@@ -69,9 +74,18 @@
-               };
-       };
- 
--      dsa {
--              status = "disabled";
-+      mvsw61xx {
-+              compatible = "marvell,88e6171";
-+              status = "okay";
-+              reg = <0x10>;
-+
-+              mii-bus = <&mdio>;
-+              cpu-port-0 = <5>;
-+              cpu-port-1 = <6>;
-+              is-indirect;
-+      };
- 
-+      dsa {
-               compatible = "marvell,dsa";
-               #address-cells = <2>;
-               #size-cells = <0>;
-@@ -163,22 +177,22 @@
-               };
- 
-               partition@200000 {
--                      label = "kernel";
-+                      label = "kernel1";
-                       reg = <0x200000 0x2A0000>;
-               };
- 
-               partition@4A0000 {
--                      label = "rootfs";
-+                      label = "rootfs1";
-                       reg = <0x4A0000 0x1760000>;
-               };
- 
-               partition@1C00000 {
--                      label = "alt_kernel";
-+                      label = "kernel2";
-                       reg = <0x1C00000 0x2A0000>;
-               };
- 
-               partition@1EA0000 {
--                      label = "alt_rootfs";
-+                      label = "rootfs2";
-                       reg = <0x1EA0000 0x1760000>;
-               };
- 
-@@ -209,53 +223,6 @@
- 
- &mdio {
-       status = "okay";
--
--      switch@10 {
--              compatible = "marvell,mv88e6085";
--              #address-cells = <1>;
--              #size-cells = <0>;
--              reg = <16>;
--
--              ports {
--                      #address-cells = <1>;
--                      #size-cells = <0>;
--
--                      port@0 {
--                              reg = <0>;
--                              label = "ethernet1";
--                      };
--
--                      port@1 {
--                              reg = <1>;
--                              label = "ethernet2";
--                      };
--
--                      port@2 {
--                              reg = <2>;
--                              label = "ethernet3";
--                      };
--
--                      port@3 {
--                              reg = <3>;
--                              label = "ethernet4";
--                      };
--
--                      port@4 {
--                              reg = <4>;
--                              label = "internet";
--                      };
--
--                      port@5 {
--                              reg = <5>;
--                              label = "cpu";
--                              ethernet = <&eth0port>;
--                              fixed-link {
--                                      speed = <1000>;
--                                      full-duplex;
--                              };
--                      };
--              };
--      };
- };
- 
- &uart0 {
-@@ -274,10 +241,14 @@
- };
- 
- /* eth1 is connected to the switch at port 6. However DSA only supports a
-- * single CPU port. So leave this port disabled to avoid confusion.
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-  */
- &eth1 {
--      status = "disabled";
-+      status = "okay";
-+      ethernet1-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
- };
- 
- /* There is no battery on the board, so the RTC does not keep