kirkwood: remove support for kernel 4.14
[openwrt/staging/wigyori.git] / target / linux / kirkwood / patches-4.14 / 110-pogo_e02.patch
diff --git a/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
deleted file mode 100644 (file)
index 26dbf8a..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -22,6 +22,13 @@
-       compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
-                    "marvell,kirkwood";
-+      aliases {
-+              led-boot = &led_health;
-+              led-failsafe = &led_fault;
-+              led-running = &led_health;
-+              led-upgrade = &led_fault;
-+      };
-+
-       memory {
-               device_type = "memory";
-               reg = <0x00000000 0x10000000>;
-@@ -35,12 +42,12 @@
-       gpio-leds {
-               compatible = "gpio-leds";
--              health {
-+              led_health: health {
-                       label = "pogo_e02:green:health";
-                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
--                      default-state = "keep";
-+                      default-state = "on";
-               };
--              fault {
-+              led_fault: fault {
-                       label = "pogo_e02:orange:fault";
-                       gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-               };
-@@ -97,24 +104,24 @@
-       status = "okay";
-       partition@0 {
--              label = "u-boot";
--              reg = <0x0000000 0x100000>;
-+              label = "uboot";
-+              reg = <0x0 0xe0000>;
-               read-only;
-       };
--      partition@100000 {
--              label = "uImage";
--              reg = <0x0100000 0x400000>;
-+      partition@e0000 {
-+              label = "uboot_env";
-+              reg = <0xe0000 0x20000>;
-       };
--      partition@500000 {
--              label = "pogoplug";
--              reg = <0x0500000 0x2000000>;
-+      partition@100000 {
-+              label = "second_stage_uboot";
-+              reg = <0x100000 0x100000>;
-       };
--      partition@2500000 {
--              label = "root";
--              reg = <0x02500000 0x5b00000>;
-+      partition@200000 {
-+              label = "ubi";
-+              reg = <0x200000 0x7e00000>;
-       };
- };