layerscape: add patches-5.4

[openwrt/staging/wigyori.git] / target / linux / layerscape / patches-5.4 / 302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch b/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch
new file mode 100644 (file)
index 0000000..7e3cdb6
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch
@@ -0,0 +1,29 @@
+From fa7b2d215b494f912b591f28c1205593bccfc2cc Mon Sep 17 00:00:00 2001
+From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
+Date: Sun, 16 Dec 2018 23:05:12 +0200
+Subject: [PATCH] arm64: dts: freescale: lx2160a: Inphi in112525_s03 mdio node
+
+Add Inphi retimer phyid in the mdio node, solving the probe issue
+for this non-standard clause-45 device.
+
+Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 6 ++----
+ 1 file changed, 2 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
++++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+@@ -188,11 +188,9 @@
+ };
+ 
+ &emdio2 {
+-      inphi_phy: emdio2_phy@0 {
+-              compatible = "ethernet-phy-ieee802.3-c45";
++      inphi_phy: ethernet-phy@0 {
++              compatible = "ethernet-phy-id0210.7440";
+               reg = <0x0>;
+-              interrupts = <0 9 IRQ_TYPE_EDGE_FALLING>,
+-                      <0 10 IRQ_TYPE_EDGE_FALLING>;
+       };
+ };
+