+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "omnima,hpm", "ralink,rt3883-soc";
- model = "Omnima HPM";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "hpm:orange:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_status: status {
- label = "hpm:green:status";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- eth {
- label = "hpm:green:eth";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- eth2 {
- label = "hpm:red:eth";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "hpm:green:wifi";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "hpm:red:wifi";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- /* gpio 12 and 13 handle the OC input */
-
- usb0 {
- gpio-export,name = "usb0";
- gpio-export,output = <1>;
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
-
- usb1 {
- gpio-export,name = "usb1";
- gpio-export,output = <1>;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <25000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "config";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- reg = <0x00050000 0x00fb0000>;
- label = "firmware";
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- mtd-mac-address = <&factory 0x28>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};