ramips: add support for Intenso Memory 2 Move USB 3.0

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / M2M.dts

diff --git a/target/linux/ramips/dts/M2M.dts b/target/linux/ramips/dts/M2M.dts
new file mode 100644 (file)
index 0000000..aa98991
--- /dev/null
+++ b/target/linux/ramips/dts/M2M.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+       compatible = "M2M", "ralink,rt5350-soc";
+       model = "Intenso Memory 2 Move";
+
+       chosen {
+               bootargs = "console=ttyS1,57600n8 root=/dev/mtdblock5";
+       };
+
+       palmbus@10000000 {
+               uart@500 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l6405d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "Bootloader";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "Config";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "Factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wifi {
+                       label = "m2m:blue:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+               wan {
+                       label = "m2m:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+                       power {
+                               label = "power";
+                               gpios = <&gpio0 1 1>;
+                               linux,code = <0x116>;
+                       };
+                       reset {
+                               label = "reset";
+                               gpios = <&gpio0 10 1>;
+                               linux,code = <0x198>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               mtd-mac-address = <&factory 0x28>;
+       };
+
+       esw@10110000 {
+               ralink,portmap = <0x2f>;
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0x0>;
+       };
+};