ramips: add Poray M4 4M/8M support

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / M4-4M.dts

diff --git a/target/linux/ramips/dts/M4-4M.dts b/target/linux/ramips/dts/M4-4M.dts
new file mode 100644 (file)
index 0000000..86bd832
--- /dev/null
+++ b/target/linux/ramips/dts/M4-4M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+       compatible = "M4", "ralink,rt5350-soc";
+       model = "Poray M4";
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "pm25lq032";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "pm25lq032";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x3b0000>;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+               ralink,led_polarity = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "m4:blue:status";
+                       gpios = <&gpio0 9 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
+               ralink,led-polarity = <1>;
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+};