ramips: update device tree source files

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WIZFI630A.dts

diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
index 9f1956496912871b4b08373a06fedb6594d1a31b..882086bcc046797fbf054229095f20aa6a425321 100644 (file)
--- a/target/linux/ramips/dts/WIZFI630A.dts
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -2,10 +2,11 @@
 
 #include "rt5350.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-       compatible = "wizfi630a", "ralink,rt5350-soc";
+       compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
        model = "WIZnet WizFi630A";
 
        chosen {
@@ -22,22 +23,22 @@
 
                run {
                        label = "wizfi630a::run";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "wizfi630a::wps";
-                       gpios = <&gpio0 20 1>;
+                       gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
                };
 
                uart1 {
                        label = "wizfi630a::uart1";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                };
 
                uart2 {
                        label = "wizfi630a::uart2";
-                       gpios = <&gpio0 21 1>;
+                       gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -49,25 +50,25 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 17 1>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
                
                scm1 {
                        label = "SCM1";
-                       gpios = <&gpio0 19 1>;
+                       gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
 
                scm2 {
                        label = "SCM2";
-                       gpios = <&gpio0 2 1>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_1>;
                };
        };