X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Flayerscape%2Fpatches-5.4%2F302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch;fp=target%2Flinux%2Flayerscape%2Fpatches-5.4%2F302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch;h=38941722ff5f5f9a6162809f8a9ba79982cb509e;hp=0000000000000000000000000000000000000000;hb=cddd4591404fb4c53dc0b3c0b15b942cdbed4356;hpb=d1d2c0b5579ea4f69a42246c9318539d61ba1999

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch b/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch
new file mode 100644
index 0000000000..38941722ff
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch
@@ -0,0 +1,164 @@
+From 5508bc9764760ca32990d5f7fa494be78e711ff6 Mon Sep 17 00:00:00 2001
+From: Li Yang <leoyang.li@nxp.com>
+Date: Fri, 5 Oct 2018 18:22:46 -0500
+Subject: [PATCH] arm64: dts: ls2081ardb: Add DTS support for NXP LS2081ARDB
+
+This patch add support for NXP LS2081ARDB board which has
+LS2081A SoC.
+
+LS2081A SoC is 40-pin derivative of LS2088A SoC
+So, from functional perspective both are same.
+Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
+
+Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
+Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
+Signed-off-by: Tao Yang <b31903@freescale.com>
+Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
+Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
+Signed-off-by: Li Yang <leoyang.li@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile            |   1 +
+ arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 127 ++++++++++++++++++++++
+ 2 files changed, 128 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
+
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
+@@ -0,0 +1,127 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Device Tree file for NXP LS2081A RDB Board.
++ *
++ * Copyright 2017 NXP
++ *
++ * Priyanka Jain <priyanka.jain@nxp.com>
++ *
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++	model = "NXP Layerscape 2081A RDB Board";
++	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
++
++	aliases {
++		serial0 = &serial0;
++		serial1 = &serial1;
++	};
++
++	chosen {
++		stdout-path = "serial1:115200n8";
++	};
++};
++
++&esdhc {
++	status = "okay";
++};
++
++&ifc {
++	status = "disabled";
++};
++
++&i2c0 {
++	status = "okay";
++	pca9547@75 {
++		compatible = "nxp,pca9547";
++		reg = <0x75>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x01>;
++			rtc@51 {
++				compatible = "nxp,pcf2129";
++				reg = <0x51>;
++			};
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x02>;
++
++			ina220@40 {
++				compatible = "ti,ina220";
++				reg = <0x40>;
++				shunt-resistor = <500>;
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x3>;
++
++			adt7481@4c {
++				compatible = "adi,adt7461";
++				reg = <0x4c>;
++			};
++		};
++	};
++};
++
++&dspi {
++	status = "okay";
++	dflash0: n25q512a@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <3000000>;
++		reg = <0>;
++	};
++};
++
++&qspi {
++	status = "okay";
++	fsl,qspi-has-second-chip;
++	flash0: s25fs512s@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "spansion,m25p80";
++		spi-rx-bus-width = <4>;
++		spi-tx-bus-width = <4>;
++		spi-max-frequency = <20000000>;
++		reg = <0>;
++	};
++	flash1: s25fs512s@1 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		spi-rx-bus-width = <4>;
++		spi-tx-bus-width = <4>;
++		compatible = "spansion,m25p80";
++		spi-max-frequency = <20000000>;
++		reg = <1>;
++	};
++};
++
++&sata0 {
++	status = "okay";
++};
++
++&sata1 {
++	status = "okay";
++};
++
++&usb0 {
++	status = "okay";
++};
++
++&usb1 {
++	status = "okay";
++};