X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FFREESTATION5.dts;fp=target%2Flinux%2Framips%2Fdts%2FFREESTATION5.dts;h=a3cc8fc97dac72cf2a40fa9ff37aa4d8d9a0bc9c;hp=442cd268dde03ca1b12e644d7a07577055afb4f0;hb=dca18caa7907c23348add2d088f3b799260d2821;hpb=eecce5abadbb9662d8724dfc1d247cb1d884976f

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index 442cd268dd..a3cc8fc97d 100644
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -72,16 +72,15 @@
 		status = "okay";
 	};
 
-	poe: gpio-regulator {
+	gpio-export {
+		compatible = "gpio-export";
 		// Used to enable power-over-ethernet passthrough from port0 to port1.
 		// Disable passthrough by default to prevent accidental equipment damage.
-		compatible = "regulator-gpio";
-
-		regulator-name = "poe-power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		enable-gpio = <&gpio0 12 0>;
+		poe {
+			gpio-export,name = "poe-passthrough";
+			gpio-export,output = <1>; // OUT_INIT_HIGH
+			gpios = <&gpio0 11 1>;    // GPIO 11, ACTIVE_LOW
+		};
 	};
 
 	gpio-leds {